Hi, My FT-736 suddenly lost all audio (apart from the scanning beep). Looks like the Q06 opamp in the AF Unit failed and shorted out the 1Ω,1/4W resistor (fuse), 13.8V at the supply side, 2.4V at pin 5. Could also be that the 2200μF cap. is shot. I can hear low level noise and signals using an old AF amp. connected to the J02 AF in plug so the rest of the rig incl. the TX appears fine. Any hints how to cure this sick baby will be appreciated. Searched for a NEC μPC2002H replacement but no joy. Found a possible solution at: http://diyaudioprojects.com/Chip/DIY-TDA2050-Hi-Fi-Chip-Amplifier where the data sheet includes a Single Supply Typical Application Circuit, Fig. 3 in the pdf file @: http://diyaudioprojects.com/Chip/DIY-TDA2050-Hi-Fi-Chip-Amplifier/TDA2050-Datasheet.pdf. Any feedback is welcome, guess Yaesu does not carry any spare boards or spare parts for this old rig. Thanks and 73 de AB4AB Ben
_______________________________________________ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
