Has anyone got the connection data for FT847 to DSP2232
And the same for TS2000 to DSP2232
Email direct pe...@peter-gibson.co.uk
Thank Peter G7LJA
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Joi
A friend has loaned me a Kantronics KPC-3+ TNC with v9.1 firmware. I've
been searching for settings specific to this unit for ARISS work. Most
of what I found are generic settings (some info is conflicting).
I'm wondering if anyone is successfully using one of these units for
ARISS work, and
This was sent to our local ham club reflector. I thought it would be of
interest to a few satellite hams. Although it is a commercial site that
sells the ready made cables, the pinouts are all there for those that
want to build their own.
73...bruce
Comprehensive list TNC to radio list.
http:/
Hi Kelley,
> ... searching for settings specific to this unit for ARISS work
I'm not familiar with the Kantronics syntax for typing commands but
see below for a general summary of the parameters you may find useful.
ARISS has a summary of hardware TNC and soundcard TNC operations
posted at:
http
sometime's is not recognized by KAM, I
use ^M with MFJ 1278B and it works.
73
Nitin [VU3TYG]
>
> From: JoAnne Maenpaa
>To: AMSAT-BB@amsat.org
>Sent: Friday, 20 June 2014 6:22 AM
>Subject: Re: [amsat-bb] TNC Question
>
>
>Hi Kelley,
&g
Thanks everyone for all your suggestions.
I've been testing the unit on the APRS frequency of 144.390 MHz while
playing with the various settings suggested. I am not using host mode
(KISS). I have the KPC-3+ (version 9.1 firmware) connected to my Icom
IC-746 via the accessory ports on the rea
I have my tnc-2 in kiss mode and want to return it to ax.25. How do I do
this from hyper terminal??
Thanks
nick ARS K5QXJ EM30xa 30.1N 92.1W
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
_
I know its an old tnc but does anyone have info on the jumper settings they
can scan and email to me? Or how the com port speed is set? If I can use it
to free up one of my newer tnc's for another use that would be great.
Would be nice to locate newer firmware if possible. I have a burner, just
Hello all,
Recently Ive bought an Icom 910H and I would like to use with a TNC in
satellite mode and in normal mode, using the main band, but as you will know
this transceiver has two mini din connectors, one used for the main band and
the other is used for the suband, I would not like to lose
