Thanks everyone for all your suggestions.
I've been testing the unit on the APRS frequency of 144.390 MHz while
playing with the various settings suggested. I am not using host mode
(KISS). I have the KPC-3+ (version 9.1 firmware) connected to my Icom
IC-746 via the accessory ports on the rea
sometime's is not recognized by KAM, I
use ^M with MFJ 1278B and it works.
73
Nitin [VU3TYG]
>
> From: JoAnne Maenpaa
>To: AMSAT-BB@amsat.org
>Sent: Friday, 20 June 2014 6:22 AM
>Subject: Re: [amsat-bb] TNC Question
>
>
>Hi Kelley,
&g
Hi Kelley,
> ... searching for settings specific to this unit for ARISS work
I'm not familiar with the Kantronics syntax for typing commands but
see below for a general summary of the parameters you may find useful.
ARISS has a summary of hardware TNC and soundcard TNC operations
posted at:
http
A friend has loaned me a Kantronics KPC-3+ TNC with v9.1 firmware. I've
been searching for settings specific to this unit for ARISS work. Most
of what I found are generic settings (some info is conflicting).
I'm wondering if anyone is successfully using one of these units for
ARISS work, and