This is really a question about generic uboot (and probably by extension linux) support for your board which you should take up with the board vendor or author of the uboot port - you haven't yet gotten that working to the point where you are asking an android question.
On Dec 9, 6:53 am, PREMRAJ SV <svpre...@gmail.com> wrote: > Hello all, > I am working in hawkboard for porting Android. I have my board > without u-boot being flashed. So i started form the scratch flashing u-boot. > Using windows and tool called AIS generator following the link, > > http://alokprasad.spaces.live.com/blog/cns!48CAA8345A2495B1!374.entry > > I am using cross cable as mentioned and DIP switch in correct position as > specified. But when i am connecting it to host through serial convertor and > reseting the switch, BOOTME signal is received and followed by I/O error and > the process is getting failed. What might be the problem. i could not find > any clue for it. I am highly disappointed with no tools or methods being > available to flash u-boot from my Ubuntu host after all Android and every > stuffs being developed using linux. Any help would be very thankful. -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting