Unfortunately the parameters in conf/machine/at91sam9263ek.conf match
exactly the block size for my NAND-flash (128k). So the problem still exists
for opie-image. I could only hack a little a kernel to boot this image from
the NOR. NOR works, can't say fine, but works.
2009/4/15 Maxim Podbereznyi
Hi,
I am trying to use my libertas cf wifi card with my Akita. I am getting kernel
Oops on card insertion. Digging about a bit it seems that things fall over
during firmware down load.
I have the same thing with my own build and the narcissus build. From the
dmesg it looks like the libertas_c
Hello,
Since some time I have started working on an 2.6.28 kernel upgrade for the
hx4700 - driven by curiosity and also to check it out myself a bit ... . The
main purpose was in fact to get the acx100 with mac80211, which would result
in WPA wifi support.
The status is, that scanning for APs
Well, you are absolutely right!
I should pay more attention to this parameter. The only thing now is how to
reassemble the image without additional effort?
Will it work?
> bitbake opie-image
2009/4/14 D.Pageau
> On 2009-04-14 12:30, Maxim Podbereznyi wrote:
>
>> Then it's booting:
>> [42949374
On 2009-04-14 12:30, Maxim Podbereznyi wrote:
Then it's booting:
[42949374.58] rtc-at91sam9 at91_rtt.0: setting system clock to
2009-04-03 22:24:44 UTC (1238797484)
[42949374.64] uncorrectable error : <3>uncorrectable error :
<3>uncorrectable error : <3>uncorrectable error : <3>uncorrecta
;
TARGET_OS = "linux-gnueabi"
MACHINE = "at91sam9263ek"
DISTRO = "angstrom"
DISTRO_VERSION= "2009.X-test-20090414"
TARGET_FPU= "soft"
Then I downloaded it with u-boot and burned it into NAND flash:
U-Boot> tftp 2
