On Fri, 14 Dec 2012, Ron Flory wrote:
Yes- fails exactly the same. This capture was from the third try.
I was having a similar problem on one machine I was building on, and
finally got around it by doing a clean and/or starting over with a new
setup-scripts.
Sometimes if you break out of
On Fri, 14 Dec 2012, Peter Kurrasch wrote:
% sudo mke2fs -T ext4 -L beagle-me /dev/sdb2
% sudo tune2fs -j -O extents,uninit_bg,dir_index /dev/sdb2
(The -j wasn't necessary since "ext4" already turns on journaling.)
Once I installed my Angstrom build and booted up everything seemed to be just
On Fri, 14 Dec 2012, Peter Kurrasch wrote:
Thanks for the help anyway--I'm about out of ideas myself!
I would try adding the kernel-modules as suggested in my last reply to
Scott's message, I think that might resolve your issue.
--
Regards,
Alan
___
On Fri, 14 Dec 2012, Scott Garman wrote:
The do_deploy step is what actually copies the kernel to the images
directory. You can force this to happen again with:
bitbake virtual/kernel -c deploy
Not sure if you need a -f in there too (which would force the step to run
regardless of sstate sta
On Fri, 14 Dec 2012, Scott Garman wrote:
Card default 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x2080, irq 16'
Mixer name: 'Cirrus Logic CS4297A rev 3'
Components: 'AC97a:43525913'
Controls : 24
Simple ctrls : 13
On my beagleboard, I get:
Card d
On 2012-12-14 14:45, Ron Flory wrote:
Yes, 'wget' succeeds for this file, although it does seem to take quite
awhile. Perhaps the Fetcher is timing out too early?
Did you use exactly the command line & options that are listed in the error log?
In any case, you can just use the file you d
Yes, 'wget' succeeds for this file, although it does seem to take
quite awhile. Perhaps the Fetcher is timing out too early?
Its odd that it would keep tripping at this point though-
On 12/14/2012 3:35 PM, Gary Thomas wrote:
On 2012-12-14 14:29, Ron Flory wrote:
Yes- fails exactly the s
On 2012-12-14 14:29, Ron Flory wrote:
Yes- fails exactly the same. This capture was from the third try.
Did you try to fetch that file directly?
On 12/14/2012 2:59 PM, Peter Kurrasch wrote:
Hi Ron--
If you just re-run the bitbake step, does it fail again--and repeatedly?
On 12/14/2012 1
Yes- fails exactly the same. This capture was from the third try.
On 12/14/2012 2:59 PM, Peter Kurrasch wrote:
Hi Ron--
If you just re-run the bitbake step, does it fail again--and repeatedly?
On 12/14/2012 1:59 PM, ron flory wrote:
I just followed the instructions at:
http://www.angstrom-d
Hi Ron--
If you just re-run the bitbake step, does it fail again--and repeatedly?
On 12/14/2012 1:59 PM, ron flory wrote:
I just followed the instructions at:
http://www.angstrom-distribution.org/building-angstrom
MACHINE=beagleboard ./oebb.sh config beagleboard
MACHINE=beagleboard ./oebb.sh
I just followed the instructions at:
http://www.angstrom-distribution.org/building-angstrom
MACHINE=beagleboard ./oebb.sh config beagleboard
MACHINE=beagleboard ./oebb.sh update
MACHINE=beagleboard ./oebb.sh bitbake virtual/kernel
The kernel build is failing during the fetch of openssl.
...
N
On 12/14/2012 2:05 AM, Alan DuBoff wrote:
On Thu, 13 Dec 2012, Peter Kurrasch wrote:
I thought I would put one more question out there: Does anyone know
anything about: meta-ti/classes/sdcard_image.bbclass ???
Peter,
That looks to be broken at the moment. Look in:
meta-ti/recipies-misc/i
Unfortunately for me, the working config is one I got using the old
narcissus (kernel 2.6.32) but now I'm trying to do a build myself using
the openembedded and bitbake stuff (kernel 3.2). Plus it's a different
uboot image.
I'd like to find someone (from TI?) who can tell me that the twl4030
On 12/10/2012 06:05 PM, Alan DuBoff wrote:
On Mon, 10 Dec 2012, Alan DuBoff wrote:
As a test I'm building a systemd image to see if it builds the modules
tarball, which I believe it will...
Nope, didn't do that...no tarball...but it did build an image.
Odd thing is that I remember that being
On 12/09/2012 01:05 PM, Peter Kurrasch wrote:
Thanks for the suggestion, Scott. I ran the alsamixer app and got some
puzzling results. If I go through all the controls to take everything
off mute and/or set the gain to 0db or greater, there is no
change--still no sound. There's a lot of contro
On Thu, 13 Dec 2012, Peter Kurrasch wrote:
I thought I would put one more question out there: Does anyone know anything
about: meta-ti/classes/sdcard_image.bbclass ???
Peter,
That looks to be broken at the moment. Look in:
meta-ti/recipies-misc/images/ti-hw-bringup-image.bb
You'll see a
16 matches
Mail list logo
