On Tue, May 22, 2018 at 10:43:36AM +0100, Ralph Corderoy wrote:
> https://www.archlinux.org/packages/extra/x86_64/nftables/ says
> Flagged out-of-date on 2018-05-11
> Version 1:0.8.5-1 in testing
> so perhaps that new version would help?
I'm happy to report that after updating to the latest
On Tue, May 22, 2018 at 08:58:47AM +0200, David Runge wrote:
> Does only the nft command fail, or does it work, when it's in a
> configuration file?
Only the nft command fails, it seems.
I guess I'll wait for the latest in the test repo and see what happens.
Regards.
Hi all,
I just updated one of my computer to 4.16.9. After update, the following
nft commands will not work:
nft add table ip nat <--- this one works without error
nft add chain ip nat prerouting { type nat hook prerouting priority 0
\; }
^
This will give me the following erro
> But the new problem is: Why this service automatically start? I never
> manually enabled mdmonitor, and I cannot find its link in
> /etc/systemd/system/ .
OK, it seems that the unit is somehow a dependence for some other units:
$ systemctl is-enabled mdmonitor
static
And I just masked th
Ah, I found the problem: I never configured an email address in
/etc/mdadm.conf
But the new problem is: Why this service automatically start? I never
manually enabled mdmonitor, and I cannot find its link in
/etc/systemd/system/ .
Regards.
On Mon, Jun 23, 2014 at 09:57:46AM -0500, Sander Jansen wrote:
> I don't think the service failed to start, The ExecStartPre starts with an
> -, so it's allowed to fail to start that script, but unit isn't considered
> failed:
>
> mdmonitor.service - MD array monitor
>Loaded: loaded (/usr/lib/
Hi,
I noticed that my mdmonitor.service failed to start with the following
error message:
Failed at step EXEC spawning /usr/lib/systemd/scripts/mdadm_env.sh:
No such file or directory
My mdadm package version is 3.3.1-2. Should I create such a script on my
own?
Regards.
On Sun, Sep 08, 2013 at 07:27:34PM +0200, Lukas Jirkovsky wrote:
> On 8 September 2013 18:37, Bill Sun wrote:
> > When the server is connected to the Internet, this service file can
> > launch the proxy successfully, but it doesn't work on system startup,
> > suppos
Hi,
I have a web proxy that can only initiate itself online, otherwise it
would exit with an error. To daemonize that proxy, I wrote the following
systemd service file:
[Unit]
Description=A Proxy Server
After=network.target
[Service]
Type=simple
ExecStart=/srv/proxy/aprox
Hi,
I noticed there's alway an 'Unable to dock' error message after suspend
to RAM:
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-le
On Sat, Mar 23, 2013 at 08:30:10PM +0800, Hexchain Tong wrote:
> On Sat, Mar 23, 2013 at 2:39 PM, Bill Sun wrote:
> >
> > I'm thinking about running a http server that handles all the
> > authentication for Server 2 (such as dante?), then forward all packets
> > t
Hi,
Currently I have a arch linux server running PPTP VPN (for iOS devices
only), and I forward all PPTP VPN packets to local eth0:
iptables -A POSTROUTING -s -o eth0 -j MASQUERADE
Now I got a external proxy, and I want all the traffic currently through
the PPTP VPN then through that extenal
On Mon, Jan 14, 2013 at 11:33:56PM -0200, André Vitor de Lima Matos wrote:
>
> Em 14-01-2013 18:39, Dave Reisner escreveu:
> > Oh the irony... Please subscribe to arch-dev-public if you're going to
> > continue to use the testing repository:
> >
> > https://mailman.archlinux.org/pipermail/arch-dev-
On Sun, Jun 17, 2012 at 09:19:43PM +0800, Bill Sun wrote:
> Problem solved. Thanks.
I probably should put a more comprehensive solution here.
I consulted the 'Xen' [1] entry in archwiki, and add:
MODULES="xen-blkfront xen-fbfront xenfs xen-netfront xen-kbdfront"
to
On Wed, Jun 13, 2012 at 04:29:44PM -0700, Kevin Arthur wrote:
> Looks like your initramfs got borked when you updated the kernel. Make
> sure to read the recent news article [1] about systemd-tools replacing
> udev (and maybe the last question in the troubleshooting section of the
> pacman wiki pa
I got the error message:
ERROR: device '/dev/xvda1' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/xvda1'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty; job control turned off
Regards
On Tue, Jun 12, 2012 at 05:43:52PM +0200, Tom Gundersen wrote:
> Did you follow the instructions in the news item?
>
> One thing to try would be "pacman -Syu --ignore filesystem", reboot
Can't do that. Because 'kernel26-lts' needed to be replaced by 'linux-
lts', if I don't update 'filesystem', the
Hi,
I rent a VPS from a not-so-famous provider, and they use XEN. After I
updated my system on Jun 10 (I update my system every Sundays), My VPS
seems dead. I can't ssh to it, I can't ping to it, I can't do anything
to it. I don't get any error message from the SolusVM control panel---it
says: 'on
On Tue, May 15, 2012 at 09:22:41PM -0400, adrian sun wrote:
> Yaaa, thanks i solved this problem. Just specified xim for english locale
> under gtk module file.
Hmm...Maybe you don't have to manually edit /etc/gtk-2.0/gtk.immodules,
specifying xim for english locale. You just need to install fcitx-
On Tue, May 15, 2012 at 12:36:42AM -0400, adrian sun wrote:
> Oh. Thanks!
> I also check some wikis, I don't know why only firefox and chromium cannot
> use fcitx. All other applications works well with fcitx.
>
Install 'fcitx-gtk2' and/or 'fcitx-gtk3'.
Cheers.
On Thu, Apr 26, 2012 at 10:28:00AM -0500, Leonid Isaev wrote:
> On Thu, 26 Apr 2012 10:56:47 +0800
> Bill Sun wrote:
>
> So... does your GV work now?
Yes! (Oops, I forgot to mention that...)
Thanks.
On Wed, Apr 25, 2012 at 12:35:46PM -0500, Leonid Isaev wrote:
> Assuming you are running a desktop machine, why would you want to DROP by
> default all outgoing traffic? AFAICT google voice app makes you browser
> establish some UDP connecyions + https. So here are few observations regarding
> your
Hi,
I just tried to use google voice to contact someone, after 2 'dialing
sounds', I couldn't hear anything. After I stopped iptables, I can make
phone calls via google voice successfully.
I searched the web, and found 2 possible solutions: [1] and [2]. Then I
added iptables rules according to th
On Tue, Feb 21, 2012 at 10:02:37AM -0500, Calvin Morrison wrote:
>
> This whole thing is strange. I am running ubuntu/arch/win7 with grub2 and
> everything works perfectly. I am running an X220 as well with the intel
> sandy bridge. Is there a spot where this is set in my grub.cfg? If i could
> pi
Hi,
According your posts, should I file a bug report directly to lenovo?
Regards,
Bill
On Tue, Feb 21, 2012 at 05:51:29AM +0100, Ralf Mardorf wrote:
> Did you check by running "sudo hwinfo --framebuffer" too? It shouldn't
> differ, but perhaps there's something fishy with vbeinfo.
I just checked `sudo hwinfo --framebuffer`, the attachment below is the
result.
Cheers,
Bill
02: None 0
Hi,
@Keshav P R:
I tried:
set gfxmode="1366x768;auto"
It didn't give me a 1366x768 console; instead, grub2 just gave me a
1024x768 console.
@Thomas Courbon:
Yes, I just tried the 'auto' parameter, and, indeed, it didn't change
anything.
I just update my BIOS to the latest version---1.2.6, and
Hi,
I want to have a 1366x768 resolution for grub2. Unfortunately, `vbeinfo`
shows that my computer doesn't support that resolution (up to
960x640/1024x768). So, can I load some additional modules for grub2 so
that it can support 1366x786 resolution in my computer?
I tried to do the following ste
28 matches
Mail list logo
