struggling with it.
--- On Tue, 3/15/11, Misi Mladoniczky m...@rrr.se wrote:
From: Misi Mladoniczky m...@rrr.se
Subject: Re: Active link to check field size
To: arslist@ARSLIST.ORG
Date: Tuesday, March 15, 2011, 3:04 AM
Hi,
There is another way, and that is to use the
like-operator
: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Re: Active link to check field size
Bummer. I was hoping it didn’t have to be a 2 step process. Thanks
Anne Ramey
***
E-mail correspondence to and from this address may be subject to the North
I must be being dense, but I'm trying to write an active link that only fires
if a field is more than a certain length. Can't figure out how to do that.
Know how to trim it and set the length, but not check it in the qualification.
I tried this
LENGTH('Field') 500
But it didn't like that.
in the qualification in an active link that runs in an
order after the first active link..
Hope this helps..
Cheers
Joe
From: Ramey, Anne
Sent: Monday, March 14, 2011 10:18 PM
Newsgroups: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Active link to check field size
**
I must
.
From: Action Request System discussion list(ARSList)
[mailto:arslist@ARSLIST.ORG] On Behalf Of Joe Martin D'Souza
Sent: Monday, March 14, 2011 10:50 PM
To: arslist@ARSLIST.ORG
Subject: Re: Active link to check field size
**
Anne,
You are close but not quite that close...You can’t use it that way
..
Cheers
Joe
From: Ramey, Anne
Sent: Monday, March 14, 2011 10:55 PM
Newsgroups: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Re: Active link to check field size
Bummer. I was hoping it didn’t have to be a 2 step process. Thanks
Anne Ramey
6 matches
Mail list logo
