Thank you very much. I tried it but the result is
It seems that I have to move to delphi5 now.
regards.
john
- Original Message -
From: "Andre Bierwirth" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 31, 2003 8:21 PM
Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHO
cvs update your libpri
regards
Martin
On Mon, 31 Mar 2003, Alex Zarubin wrote:
> Hi,
>
> There are several channels on the PRI span with the periodic warning:
>
> WARNING[9226]: File chan_zap.c, Line 5437 (pri_dchannel): Ring requested on
> channel 21 already in use on span 1. Hanging up owner.
Thanks Mark!
Unfortunately, I bought it directly from Gaute a while back. The
power supply turned out to be fairly inexpensive at $35US, so I wasn't too
ticked off. :) If you or anyone else needs a source for the power supply,
let me know.
-wade
> -Original Message-
> From: [
I use Delphi5 Enterprise !!.
dsgnintf.pas is in Delphi6 DesignIntf.pas but it hasn´t the TStringProperty
class now. TStringProperty is moved to DesignEditors in Delphi6.
You can change "uses dsgnintf" line 221 to "uses DesignEditors" but i didn´t
have try this in Delphi6.
Regards.
Andre
- O
> We had a slightly similar problem with our Zplex10. The power supply died
> and we had to replace it. :( It got progressively worse until no lights
> came on and the fans spun really slowly.
>
> You might also want to check that your connection cable is correct and has a
> sure connection...
On Mon, 31 Mar 2003, TC wrote:
|If you can still login you can do
|set2default
|That will set it to factory defaults all your config info is now gone you
|must re-provision
|with all the slot nonsense
|(the default user name is admin, the default password is zhone):
|I have an old working conf
We had a slightly similar problem with our Zplex10. The power supply died
and we had to replace it. :( It got progressively worse until no lights
came on and the fans spun really slowly.
You might also want to check that your connection cable is correct and has a
sure connection...
-wade
> -
> Do not plug in ethernet cable at all, even if the interface is down.
This device has poor networking implementation. If I leave one of ours
plugged in (pretty traffic intensive in our shop) it is sure to go down. If
it is in a switch or slow segement it does ok but as Steven pointed out you
are
If you can still login you can do
set2default
That will set it to factory defaults all your config info is now gone you
must re-provision
with all the slot nonsense
(the default user name is admin, the default password is zhone):
I have an old working config for a 24fxs zhone in format used by
Read www.digium.com at Documentation->FAQ
Martin
On Mon, 31 Mar 2003, Allan Wang wrote:
> Steven,
>
>
> Could you please give me your config files for X100P
> and S100U? I just got mine, but I have difficulty to
> make it work.
> Thank you.
>
>
>
>
> Allan
>
>
>
> --- Steven Critchfield <[EMAI
|Do not plug in ethernet cable at all, even if the interface is down.
|
|The long time to come up is due to the software being verified, and then
|booted. It is that way on many channel banks.
|
|Also it could mean the zplex is not happy with the line coding it is
|getting. It is a very sensitive
Okay,
Hypothetically I have a model number of a phone to order, the FDN of the
slot to program, and the security code to program it.
How long is a FDN or security code?
The ones that I have seem to be numbers larger than 32-bit (the code
appears to use four bytes, aka 32-bits). Does that make s
Hi,which version of delphi are you using? The dsgnintf.pas can't be find in
delphi 6.
Regards.
john
- Original Message -
From: "Andre Bierwirth" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 31, 2003 9:32 AM
Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHONE Win32
On Mon, 2003-03-31 at 18:12, Eris Riswanto wrote:
> Hello
>
> I have serious problem with zhone z-plex 10
> the device sometimes get red alarm on some channel
> and then the device suddenly shutdown.
> I try to unplugged the power chord and plug again,
> but the device still didn't up. I have to w
On Mon, 2003-03-31 at 14:55, Allan Wang wrote:
> Steven,
>
>
> Could you please give me your config files for X100P
> and S100U? I just got mine, but I have difficulty to
> make it work.
> Thank you.
I only have T1 interfaces. 1 T400P at work, one T100P at home, and soon
to have a T100P for work
Title: chan_zap.c Warning : channel already in use
Hi,
There are several channels on the PRI span with the periodic warning:
WARNING[9226]: File chan_zap.c, Line 5437 (pri_dchannel): Ring requested on channel 21 already in use on span 1. Hanging up owner.
1. Any known reason for this mes
On Mon, 2003-03-31 at 13:38, sjaak nabuurs wrote:
> Hi
>
> I'm very new to astrisk and I like to ask you as users with expirience what
> hardware to use and how to set this up.
>
> What I like to create is the followe :
>
> Use a normale phone dail a number >> astrisk >>(2Mbit) Internet(64Kb) >>
Hello
I have serious problem with zhone z-plex 10
the device sometimes get red alarm on some channel
and then the device suddenly shutdown.
I try to unplugged the power chord and plug again,
but the device still didn't up. I have to wait
for long time to get this device up again.
How can i fix thi
What signalling are you going to use ?
regards
Martin
On Mon, 31 Mar 2003, Eduardo Goncalves wrote:
> Hi,
>
> I'm abaut to install asterisk and I want to know if buying an E400P (Quad Span E-1
> Interface) from digium my linux box will be ready (of course, after configure it) to
> work with PS
Steven,
Could you please give me your config files for X100P
and S100U? I just got mine, but I have difficulty to
make it work.
Thank you.
Allan
--- Steven Critchfield <[EMAIL PROTECTED]> wrote:
> On Fri, 2003-03-21 at 10:07, WipeOut . wrote:
> > I have got my box up and running with a X
Hi
I'm very new to astrisk and I like to ask you as users with expirience what
hardware to use and how to set this up.
What I like to create is the followe :
Use a normale phone dail a number >> astrisk >>(2Mbit) Internet(64Kb) >>
astrisk >> Normal phone starts to ring and someone pick up the ph
On Mon, 31 Mar 2003, Eric Wieling wrote:
> I've not tried to get Asterisk to talk directly to Packet8.net.
> My DTA310 is on loan to a client for testing. Once I get it
> back I'll configure it to talk to Packet8 and see what packets
> are sent back and forth, then I'll see if I can get Asteri
I have a strange problem I am seeing in the asterisk console.
I pick up a phone and make a call, I get the message attempting bridge of
(zaptel devices)
then immediately I see another message saying 3 way call and indicating the
line device and then starting music on hold. (meantime the cal
Hi,
I'm abaut to install asterisk and I want to know if buying an E400P (Quad Span E-1
Interface) from digium my linux box will be ready (of course, after configure it) to
work with PSTN and my already in use PBX (E1 interface), or I'll need to buy
additional DSP's cards or whatever?
thanks
I will certainly try CIPE. However, I have my doubts that openvpn
is the problem, as another system is able to route calls just fine
over the vpn.
-Tilghman
On Monday 31 March 2003 12:16 pm, Michael Bielicki wrote:
> try CIPE,works like a breeze :)
>
> On Monday 31 Mar 2003 18:27, Tilghman Leshe
I've not tried to get Asterisk to talk directly to Packet8.net.
My DTA310 is on loan to a client for testing. Once I get it
back I'll configure it to talk to Packet8 and see what packets
are sent back and forth, then I'll see if I can get Asterisk to
talk to Packet8. I'll post a review of the ac
Martin Pycko wrote:> You shouldn't have problems in a recent CVS with that.
There are apparently still problems. I sent a SIP debug trace to Mark
and he's going to try to watch things on a live machine.
B.
___
Asterisk-Users mailing list
[EMAIL PROTE
try CIPE,works like a breeze :)
On Monday 31 Mar 2003 18:27, Tilghman Lesher shaped the electrons to say:
> I'm having some trouble with placing some iax calls over an openvpn:
>
> Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex.
> Setup B is a 266MHz P2, T100P attached to a Zhone Zpl
I'm having some trouble with placing some iax calls over an openvpn:
Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex.
Setup B is a 266MHz P2, T100P attached to a Zhone Zplex.
Setup C is a 700MHz P3, T100P attached to an Adtran TA 750.
Setup D is a 233MHz Pentium, with an X100P.
Setup
TStringProperty is an internal Delphi class in
Delphi\Source\Toolsapi\dsgnintf.pas and dbugintf.pas is a Part from GExperts
you can Download it from www.gexperts.org.
Good Luck
Andre
- Original Message -
From: "it" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 01, 200
Stefano Finetti wrote:
Do you use the same codecs in both sides (CISCO and H.323 channel
in Asterisk)?
I have to check but... If it is a codec issue, why internally between SIP
and H323 it works perfectly?
In this case, there is Asterisk between. So it handles the transcoding,
if needed.
I think
On Monday 31 March 2003 08:40 am, Stephen J Wright wrote:
>
> PS: I'm looking for a card I can put into my asterisk server into
> which I can plug ordianry analogue telephones - do you perhaps know
> of any ? thanx
The new TDMxxB cards from Digium enable you to do just this.
-Tilghman
__
>
> Do you use the same codecs in both sides (CISCO and H.323 channel
> in Asterisk)?
I have to check but... If it is a codec issue, why internally between SIP
and H323 it works perfectly?
I think I'm using for both way the G711u codec.
--
Stefano
___
You shouldn't have problems in a recent CVS with that.
regards
Martin
On Fri, 28 Mar 2003, Brian Capouch wrote:
> Eric Wieling wrote:> Try commeting out the username= and secret= and set the
> > host=dynamic. If that works you can try adding them back in.
> >
>
> That did work!!
>
> But (sigh.
Hello,
I have a Sip Express Router (www.iptel.org) setup as a registrar and a
SIP proxy for all the calls between the local IP-phones(Snom100). And I
can forward the call from those phones to the * fine. But how do I set
up so that calls coming from PSTN Zap channels go to spesific SIP
phones,
Hi
On Saturday 01 March 2003 16:31, Stefano Finetti wrote:
> > group=1 ; group=1,2,3,9-12
> > incomingmsn=*
> > msn=0
> > ;; We have two isdn cards (lines)
> > device => /dev/ttyI0
> > device => /dev/ttyI1
> > device => /dev/ttyI2
> > device => /dev/ttyI3
>
> I've a similar conf.
>
> group=1
>
Stefano Finetti wrote:
Ok, another little step done.
Now, I can place calls from both SIP and h323 phones to an outside line.
Works fine, audio is good, latency null. good.
But...
If I call from outside to *, I hear the IVR, i can check voicemail, i can
call extensions, with a problem:
If I call
Hi
I've written a small patch to logger.c which enables * to log to syslog
ased on a setting in the logger.conf file.
However, Asterisk uses the same macros as sys/sylog does. Changing the
asterisk defines won't help since they also do the macro expansion to
filename & linenumber.
Not being an ex
On Fri, Mar 28, 2003 at 11:40:54AM -0600, Jayson Vantuyl wrote:
> In my case, I still can't program, but a third party with programming
> software can. I've repeatedly drilled about whether they use a special
> security code or just 0x. I have always received the answer
> that they are pr
Ok, another little step done.
Now, I can place calls from both SIP and h323 phones to an outside line.
Works fine, audio is good, latency null. good.
But...
If I call from outside to *, I hear the IVR, i can check voicemail, i can
call extensions, with a problem:
If I call an extension assigned
With the SNOM 100, I get an envelope next to the last telephone line. It
doesn't actually appear next to the telephone line that has the voicemail.
Is this a bug?
Tan
- Original Message -
From: "Andre Bierwirth" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 31, 2003 1:14
Hello,
I'd like to ask if there are any news about CE certification of the E1
boards. I know that the T1 boards are FCC certified but I'd also line to
know what is the status for CE certification.
Thanks for any input,
Vlasis Hatzistavrou.
___
Asteris
I may be wrong here and if I am then just ignore me.. :)
It looks like the email that is sent out when a new voicmail is recieved is hard coded
into the system..
It would be really cool if this message was able to be changed from the
voicemail.conf..
Later..
--
___
>
> group=1 ; group=1,2,3,9-12
> incomingmsn=*
> msn=0
> ;; We have two isdn cards (lines)
> device => /dev/ttyI0
> device => /dev/ttyI1
> device => /dev/ttyI2
> device => /dev/ttyI3
>
I've a similar conf.
group=1
context=default
msn=0
incomingmsn=*
device => /dev/ttyI0
device => /dev/ttyI1 (th
Sorry about the ignorance.
Sunny.
On Mon, 31 Mar 2003, Michael Manousos wrote:
> Date: Mon, 31 Mar 2003 14:33:07 +0300
> From: Michael Manousos <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [Asterisk-Users] Re: chan_h323 inclusion in Asterisk (was
>
Sunday Folayan wrote:
On Mon, 31 Mar 2003, Michael Manousos wrote:
Only a disclaimed driver can go into Asterisk CVS. Jeremy has completed
the disclaimer, but I have not yet received one from Michael Mansous, so
We are not thinking about disclaiming the driver at this
particular time, but the co
Hello Gopesh,
I think this book could be worth at this point of time.
http://www.amazon.com/exec/obidos/tg/stores/detail/-/books/0071410767/review
s/103-1218947-0330230#00714107673200
rgds,
/hem
- Original Message -
From: "Michael Bielicki" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Se
On Mon, 31 Mar 2003, Michael Manousos wrote:
> > Only a disclaimed driver can go into Asterisk CVS. Jeremy has completed
> > the disclaimer, but I have not yet received one from Michael Mansous, so
>
> We are not thinking about disclaiming the driver at this
> particular time, but the code will a
any indicators on the quality impact ? and mark, could you give a comment if
that would be useable as an intermediate solution to make fxo out of the fxs
station cards ?
On Sunday 23 Mar 2003 20:49, [EMAIL PROTECTED] shaped the electrons to say:
> If you have an FXS port and would like to attach
Mark Spencer wrote:
as I understand it there are 2 h323 modules in the works (as well as others
for unrelated stuff.) It would be better for everyone if these were all in
one place (main cvs repository). The default modules.conf could simply be
not to load them, and notes should be provided as to t
Hi,Andre,
I need at least the following files or classes:
TStringProperty
DbugIntf.pas
- Original Message -
From: "Andre Bierwirth" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, March 28, 2003 9:08 AM
Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHONE Win32 Alpha Rel
Lynx Automotive
Research & Development Area
Greetings.
In order to test * for a simple installation, i've installed a passive isdn
card (ASUSCOM in-100-p pci) that I know it's recorded to work under linux.
When i put in modem.conf the line device=/dev/ttyIx
52 matches
Mail list logo
