All,
I upgraded to the [*] stable release branch.
When I call into the box (confirmed on 2 installations) the
caller no longer hears the ringing. The CLI confirms that
extensions are being 'rung'.
Whassup?
Just add a ,r option to the Dial statement, or, do another upgrade.
Nah you missed my point !
It is the person CALLING IN who does not hear the ringing.
Stepping back to a previous downloaded CVS release fixed
that problem.
Since I have a system actualy being used by a salesforce who
gets reeeaaally uptight when their phones don't work, I
guess I'll have to wait
Had a similar problem
What kind of phone are you using on that line?
My case, the line was sharing a Palm modem on it.
Electrical noise from the power strip was causing the
problem.
Also when My cell phone was too close to the phone,
same problem
Also found the VMWI logic was not working well
On Apr 5, 2004, at 5:29 PM, Jonathan Biggs wrote:
Had a similar problem
What kind of phone are you using on that line?
My case, the line was sharing a Palm modem on it.
Electrical noise from the power strip was causing the
problem.
Also when My cell phone was too close to the phone,
same
Title: Message
My
mistake, it should be:
exten =
1000,1,VoicemailMain(${CallerID:6})
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe
DennickSent: Monday, April 05, 2004 6:40 PMTo:
[EMAIL PROTECTED]Subject: RE: [Asterisk-Users]
On Mon, 5 Apr 2004, Ariel Batista wrote:
Christopher C. Howard wrote:
Andrey McRory built a RPM dist for * but I can't seem to find it
anywhere.. Any hints where I might be able to find this package that
has matching kernel?
This is what I found for rpm.
I have 1 * box having x100p installed and the other has no zaptel card
at all. both of the * box has compiled in ztdummy module and both have
been activated by modprobe ztdummy.
When using trunk to connect the 2 *box. The one without zaptel card
complaint about unable to accept trunked packet:
Ryan Tucker wrote:
I don't have recent source near me, but in cdr/cdr_csv.c, there's a
commented-out #define amongst the #includes. It's CDR_LOGUSERFIELD or
something along the lines of that. Uncomment that and recompile.
Mileage with MySQL may vary. -rt
I've looked into cdr_csv.c,
I think that's the IMA ADCPM format.
Steve Underwood wrote:
Yves Chouinard wrote:
I found some posts regarding this issue dating of September 2003, but no
real answer.
The ADPCM format supported by Asterisk (the .vox files) is 4-bit, 8
kHz. I
need 4-bit, 6 kHz, which is also a widespread
dkwok wrote:
I have 1 * box having x100p installed and the other has no zaptel card
at all. both of the * box has compiled in ztdummy module and both have
been activated by modprobe ztdummy.
When using trunk to connect the 2 *box. The one without zaptel card
complaint about unable to accept
On Mon, 2004-04-05 at 17:29, Jonathan Biggs wrote:
Had a similar problem
What kind of phone are you using on that line?
My case, the line was sharing a Palm modem on it.
Electrical noise from the power strip was causing the
problem.
I'm having a similar problem. The difference
On Tue, 6 Apr 2004, Leo Ann Boon wrote:
I've looked into cdr_csv.c, cdr_pgsql.c, cdr_addon_mysql.c from 0.7.2.
So far, only cdr_csv has it as a #define. The others all support
userfield by default.
One other observation, cdr-uniqueid is the only field that's controlled
via #define in
Suppose a company has a U.S. office and a foreign
office, and would like to make toll-free calls using IP between the offices.
The U.S office will have an Asterisk system, but the foreign office has a large
legacy PBX that they want to keep.
One way to do this is to install a
At 1:07 PM -0700 on 4/5/04, Scott Laird wrote:
[snip]
2. Is anyone working on SRTP for Asterisk? Are there any SRTP
clients out there?
Scott
Yes to both.
http://www.voxilla.com/modules.php?op=modloadname=Newsfile=articlesid=56
http://www.dslreports.com/forum/remark,9818470~mode=flat
Read
OOPS ...
snip
Just add a ,r option to the Dial statement, or, do
/snip
I get it ;)
Thnx, WW
Willy Wouters
ypOne Publishing
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or
At 1:34 PM -0700 on 4/5/04, Mike Machado wrote:
Was there any aggressive pricing given for nationwide voip LD?
Level3 had several products, one they called Enhanced which was supposed
to also include E911 service. They quoted me about $.01 per minute
inbound or outbound nation wide. They said
Jeremy McNamara wrote:
It told you everything you need to know: no matching peer.
For the cheap seats: You need a peer.
Jeremy McNamara
I'm convinced that some people can't function without a M$ GUI. It doesn't
matter how verbose and descriptive an error message is, unless it's in a
My * box which has the zaptel card is also connect to voip termination
using zaptel card. The same problem exist as with the * box which does
not have the zaptel card.
The tech director of the voip provider told me that it is not a timing
issue and more to do with my config.
Let's not cynical
Thank you for all of the beta testing. New and improved graphics in this
release along with
drag and drop transfers and hold for all technologies.
There's a screenshot on the link below. Also improved documentation so read
the included README. There's also a sample xml configuration included.
I finally got a chance to much around with this a bit more. The
following discussion
tells about the hidden menu to change the modem speed on the ReplayTV
box. It's
flakey, but I can get a connection sometimes at 9600. At this point I
am using the ATA-186
for my primary extension (too much
Has anyone else seen this trunking problem?
I have two asterisk boxes, both on the same physical network inside the
same subnet.
The are both configured to communicate with each other via IAX2.
If I leave trunking off, there is no problem at all. The two systems
communicate perfectly, sound
101 - 121 of 121 matches
Mail list logo