For the last couple of days I have been battling a * installation (company
PBX) that has been spinning on the cpu at 100% utilization. This was
causing dropped calls, horrible SIP call quality, etc. The box is running
the CVS * as of Aug 5 on Fedora Core 1 on an AMD Duron processor. I called
want to get from SIP to ISDN or from SIP to SIP.I only have a
ADSL connection that means 786kb/s downstream and 128kb/supstream so i can
max handle 2 sip calls at once.I want to have 25 Accounts because of the
different numbers for thedifferent phones.Good, i wanted to buy a ready
built pc
Beierlein Moritz wrote:
want to get from SIP to ISDN or from SIP to SIP.
I only have a ADSL connection that means 786kb/s downstream and 128kb/s
upstream so i can max handle 2 sip calls at once.
I want to have 25 Accounts because of the different numbers for the
different phones.
Good, i wanted
Hi everyone,
I am running asterisk on red hat linux 9 box. The sound card is Intel
82801db AC' 97 audio and the module is i810_audio. It runs well with other
applications like xmms and the standard tests deliver a sound . I have also
tried to record voice and that works well too.
1-)Now when
Don,
I have the same situation at home. I have a shared mailbox (500), and each of
my other two SIP phones have their own. I wanted the MWI to light up for
either the individual or shared mailbox. I didn't want to use broadcasting,
since I wanted the message to clear when either of us listened to
I am running SuSE v9.0 with kernal 2.4.21-99 and my
clone cards run just fine. But I did purchase them from Digit Networks, so
I knew they were good clone cards. I think this guy does not have true
X100P clone cards.
Lyle
- Original Message -
From:
hank
To: [EMAIL
I've purchased a clone X100P (or at least I was told it was), and I am trying to
get it to work. However, when I try and load the wcfxo module, I get the following
errors
Intel's got a list of modem chipsets at
http://www.intel.com/design/modems/linecard.htm and there's a great
thread on
On Sun, 2004-08-08 at 13:29 +, niko singh wrote:
Hi everyone,
I am running asterisk on red hat linux 9 box. The sound card is Intel
82801db AC' 97 audio and the module is i810_audio. It runs well with other
applications like xmms and the standard tests deliver a sound . I have also
Niko,
Just jumping into this thread so excuse me if you have gone down this
path... sounds like to me the sjphone and * are fighting to use 5060.
Obviously the one that runs second is going to loose. I would try
setting up the sjphone (or *) to use a different port for SIP and then
point the
On Sun, 8 Aug 2004, niko singh wrote:
Thanks for taking a look greg and hank. This seems to be getting bettre
everyday..help please My sjphone is running on the same box as
asterisk...i believe then the red hat firewall should not be a problem.
Some of these problems sound like they might be
You overpaid. Whether it's a P4 OR a Celeron (which one is it?), a
2.2Ghz machine with 256MB RAM and two small drives shouldn't have cost
you more than $400-$500. I got a 2.7GHz Celeron/MB combo for $120 (less
$40 rebate), 256MB RAM for $40 and 40GB drives shouldn't run you more
than $50/each.
Is any one else having problems with Voicepulse today? Suddenly, I can't
register and calls to my Voicepulse numbers get a fast busy.
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 236-5815
___
Asterisk-Users mailing list
[EMAIL
Bruce,
Yeah I'm having the same problems with VoicePulse. It's getting to be ridiculous
because this happens all the time now.
There's a new voip provider coming out that is working with some of the larger telcos.
It will be offering similar quick turn up of services like voicepulse but much
I'm not having the problem, but then I updated my IAX configuration per
the instructions they sent out a couple of weeks ago, and that fixed a
lot of the connectivity problems that I was having.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Ken
same here. too bad i have published my numbers...
gafachi is sounding good right now.
- Original Message -
From: Ken Wiesner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004 12:17 PM
Subject: RE: [Asterisk-Users] Voicepulse problems?
Bruce,
Yeah I'm having the
can you post the instructions i think they went to my old email and i dont
see where to update email address on the wesite.
- Original Message -
From: Greg Blakely [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004 12:41 PM
Subject: RE: [Asterisk-Users] Voicepulse
Jay Milk wrote:
You overpaid. Whether it's a P4 OR a Celeron (which one is it?), a
2.2Ghz machine with 256MB RAM and two small drives shouldn't have cost
you more than $400-$500. I got a 2.7GHz Celeron/MB combo for $120 (less
$40 rebate), 256MB RAM for $40 and 40GB drives shouldn't run you more
Hello!
Am Freitag, 6. August 2004 19:42 schrieb Jeremy McNamara:
how about just running asterisk -vvvgc ?
I tracked it down!
As soon as I comment every line out of
/etc/asterisk/musiconhold.conf
it works!
The file now looks like this:
;
; Music on hold class definitions
;
[classes]
Hello!
Asterisk CVS-HEAD-08/06/04-14:55:13 won't start on two of three
different Gentoo machines.
The running installation of Asterisk (CVS-HEAD-07/28/04-13:36:42) has a
different set of muisc on hold mp3s in /var/lib/asterisk/mohmp3 than the not
working Asterisk
On Sun, 2004-08-08 at 19:37 +0200, Andreas Roedl wrote:
Hello!
Asterisk CVS-HEAD-08/06/04-14:55:13 won't start on two of three
different Gentoo machines.
The running installation of Asterisk (CVS-HEAD-07/28/04-13:36:42) has a
different set of muisc on hold mp3s in
Hello!
Am Sonntag, 8. August 2004 19:45 schrieb Dave Cotton:
On Sun, 2004-08-08 at 19:37 +0200, Andreas Roedl wrote:
Hello!
Asterisk CVS-HEAD-08/06/04-14:55:13 won't start on two of three
different Gentoo machines.
The running installation of Asterisk (CVS-HEAD-07/28/04-13:36:42)
In iax.conf
[vpconnect-t01]
type=peer
secret=jlz84532s
host=gwiaxt01.voicepulse.com
auth=md5
qualify=yes
[vpconnect-t02]
type=peer
secret=jlz84532s
host=gwiaxt02.voicepulse.com
auth=md5
qualify=yes
**
In extensions.conf:
[voicepulseld]
;
; Domestic Long
On Sun, 2004-08-08 at 12:59, Andreas Roedl wrote:
Hello!
Am Sonntag, 8. August 2004 19:45 schrieb Dave Cotton:
On Sun, 2004-08-08 at 19:37 +0200, Andreas Roedl wrote:
Hello!
Asterisk CVS-HEAD-08/06/04-14:55:13 won't start on two of three
different Gentoo machines.
The
I'm having a problem with extensions.
Any extension longer than 6 characters gets truncated to 6 characters.
For example,
exten = _7XX,3,NoOp(call for${EXTEN})
results in
call for 712345
when given
7123456
Anyone else see this?
___
Can someone please help me
with my config settings for my TDM12B.
I have got the FXS port to work fine, but I cannot get asterisk to startup with
any settings for the fxo ports.
It appears to be something related to the message Signalling
requested is FXS Kewlstart but line is in FXO
Below is a copy of the email VP sent out. There is no mention of register
statement in iax.conf. Are changes needed there too?
From: VoicePulse [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 15, 2004 1:47 AM
Subject: Important information for Connect! customers
Hello,
We're sending you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Here's a version I modified which grabs either a development or stable
verision, and does a backup before updating from CVS. It also asks for
addon's and cc.
Leif Madsen did the original development and Mark released it.
My changes does the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Here's a version I modified which grabs either a development or stable
verision, and does a backup before updating from CVS. It also asks for
addon's and cc.
Leif Madsen did the original development and Mark released it.
My changes does the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Here's a version I modified which grabs either a development or stable
verision, and does a backup before updating from CVS. It also asks for
addon's and cc.
Leif Madsen did the original development and Mark released it.
My changes does the
Hi,
I would like to be able to notify users about new voicemail messages
through the SMS system. I added a system command in my extensions.conf
file that sends a SMS message to the user. I am using a sendSMP.pl script
that I downloaded from the web.
It works fine when executed separately, but if
On Sat, 7 Aug 2004, Beierlein Moritz wrote:
Hi
I want to set up a Asterisk system for homeuse with SIP 2 ISDN.
I want to register up to 25 Sip Accounts at my Provider and I want to use up to 10
SIP Phones at Home and one ISDN Phone.
Do you think a Celeron 466 MHz machine with 128MB Ram and
Hello everybody,
I'm playing with the stable version of * and face a problem with
musiconhold. I want to use 2 class (one for parking, another for
transfer) only the default one is working. If I put in this default the
path to my classes it's ok. But if I want to use
SetMusicOnHold(myclass),
Hi everyone,I wrote some days ago:
I upgraded my source tree from CVS some hours ago because the stable
version does not hangup SIP-Calls correctly.
Unfortunately now I am confronted with nearly random crashes stating
Floating Point Exceptions and many error messages
channel.c:1650
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 08 August 2004 03:44 pm, Steve Szmidt wrote:
Hi,
Here's a version I modified which grabs either a development or stable
verision, and does a backup before updating from CVS. It also asks for
addon's and cc.
Leif Madsen did the
On Sun, 2004-08-08 at 14:57, Bartosz Wegrzyn wrote:
exten = 0,11,System(/scripts/sendSMS.pl -r 17083519199 -p TMOBILE -s
operator -m ${CALLERID})
and this is the error:
-- Executing System(SIP/192.168.0.3-0891abc8, /scripts/sendSMS.pl -r
17083519199 -p TMOBILE -s operator -m Bartosz
Why don't you use extern notify rather then running a script in the
dialplan.
Umar
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bartosz
Wegrzyn
Sent: 08 August 2004 20:57
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] How to notify the user about new
Hi
I want to set up a Asterisk system for small business with three telco
lines and 10 extensions with SIP 2.
I want to register up to 50 Sip Accounts at my Provider and I want to use
up to 10 SIP Phones at Home.
Also want the system to be very reliable.
What is the recommended hardware
On Sun, 2004-08-08 at 15:29, [EMAIL PROTECTED] wrote:
=
CAUTION: This message may contain both confidential and privileged information
intended
only for the addressee named above. If you are not the intended
I got mine from the same place and the only way I
got mine working was to upgrade kirnil to 2.6.5
you may want to try dibian sarge unstable distro
with kirnil 2.6.5.
hth
hank
- Original Message -
From:
Lyle
Giese
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004
um where did you get that system for 100.00 at? wow what a deal.
can I get url?
thanks
hank
- Original Message -
From: Jay Milk [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004 8:37 AM
Subject: RE: [Asterisk-Users] System Reqirements HELP
You overpaid. Whether it's
what provider is this that is in beta?
also have you looked in to broadvoice?
thanks
hank
- Original Message -
From: Ken Wiesner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004 9:17 AM
Subject: RE: [Asterisk-Users] Voicepulse problems?
Bruce,
Yeah I'm having the
Hi,
My Name is rudy, I am new to this forum and setting up asterisk for the
first time, I do'nt know to whom to address this hence I have not
addressed.
Pls advise as to what is the right procedure for it.
Thanks
Rudy
where can we get the script at?
- Original Message -
From: Steve Szmidt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 08, 2004 12:04 PM
Subject: [Asterisk-Users] asterisk-update script
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Here's a version I modified which
Andreas Roedl wrote:
Am Sonntag, 8. August 2004 19:45 schrieb Dave Cotton:
The problem's somewhere else I'm running Asterisk CVS-
HEAD-08/07/04-22:38:39 with all the fpm.mp3s as is with no problem.
But not on gentoo, what version of mpg123 does gentoo have?
0.59s-r3
There is only one
My Name is rudy, I am new to this forum and setting up asterisk for the
first time, I do'nt know to whom to address this hence I have not
addressed.
The complaint was that more than half of your post was taken up with a
silly disclaimer. Standard mailing list etiquette is to turn off such
On Sun, 8 Aug 2004, Kevin Johnson wrote:
I'm having a problem with extensions.
Any extension longer than 6 characters gets truncated to 6 characters.
For example,
exten = _7XX,3,NoOp(call for${EXTEN})
results in
call for 712345
when given
7123456
that's ${EXTEN}, not
I've seen 1U cases with PS for around $200 -- add the low-pro fan for
$50, then the rest of the system should still come in a hair under $600.
www.tigerdirect.com has rackmountable barebones starting in the $600s --
here's one:
I'd like to thank everyone for taking the time to reply to me... From
what I've read, and in particular the links that people who have emailed
me, that I've got the wrong modem... I've gone and done some more
searching, and found this at newegg.com
Just wondering
whether we have a resolution to iconnect incoming problem, which started
few days ago.
Cheers
SW
Can anyone say, with the current state of asterisk (CVS version, or any
other older version), using any combination of hardware, is it possible
to display the status of one extension onto another telephone?
ie, say I am extension 510 and have a polycom IP600 with 6 lines, and
associated lights.
50 matches
Mail list logo
