Hmmm... Folks, I beg you pardon, if I'm telling something which was said
before, but actually I have not found this anywhere, neither on
Voip-info.org or in several Asterisk's docs.
So, here is the statement:
If SIP extensions are in DIFFERENT CONTEXTS, then RTP traffic between them
will ALWA
> I am wanting to front-end a legacy PBX with an asterisk box. I have done
> plenty
> of asterisk work over the last 6 months to PRI circuits, but not with a PBX
> being involved.
>
> I know I can use asterisk and digium cards in this manner, but do I need
> separate cards for the PRI -> Aste
I looked into the source code of Asterisk to figure out how the printf()
statements were spaced. That's the power of open source, you can look under
the hood for these questions. It's easy to find, even for non-C-Gurus. Just
do a "grep" for the string that you want inside of the Asterisk source
Hi
So if I have this
queues.conf
[general]
[default]
[example_queue]
music = default
strategy = rrmemory
context = queue-out ; Here we go when the caller presses a single digit,
while in the queue
timeout = 20
wrapuptime=10
announce-frequency = 30
announce-holdtime = yes
joinempty = yes
member => S
Hello folks,
I've did some tests with different phones and Asterisk last two days and
here are some results, which I want to share with audience.
Cisco's 79xx and Sipura's phones/adapters on INVITE always reply with their
preferred codec.
So, for example, if Cisco's/Sipura's phone has prefe
Thanks Flynn.
Unfortunately the files aren't written by the voicemail application. I was
hoping that there was some little command-line utility which would return
basic sound information when passed the filename.
Malcolm
-Original Message-
From: El Flynn [mailto:[EMAIL PROTECTED]
Sen
Hi List,
we've made a litle script which is called /etc/init.d/zaptel. It scans
the pci bus and creates by request a /etc/zaptel.conf and a
/etc/asterisk/zapa.conf.
Also it loads the modules automagically.
If there are volunteers who want to try this out (it'll make first setup
of an asteri
Hi,
I'm working with this issue for a while, Now I already solve the
dialplan issues, but I still have a question about the Callgroups,
I read at www.voip-info.org that , there is a 63 limit of callgroups.
And I'm wondering why?? and if the 1.2.0beta version supported more than
63 Groups?? (I did'n
I got the same setup,sort of
I connected a single port sangoma to my pbx
My ony problem is,when a call comes in and it gets transfered back out
that it does not detect the hangup?So that channel keeps being open
Any ideas why
On Wed, 2005-09-07 at 01:40 -0600, Rich Adamson wrote:
> > I am wanting
Hello!
Hmmm... Folks, I beg you pardon, if I'm telling something which was said
before, but actually I have not found this anywhere, neither on
Voip-info.org or in several Asterisk's docs.
So, here is the statement:
If SIP extensions are in DIFFERENT CONTEXTS, then RTP traffic between them
Irakli Natsvlishvili wrote:
> If SIP extensions are in DIFFERENT CONTEXTS, then RTP traffic between
> them will ALWAYS go via Asterisk.
Dial plan contexts has nothing to do with how we set up RTP traffic.
> I.e. Asterisk WILL NOT issue Re-INVITE even if:
>
> 1. Both UAs have canreinvite=yes in th
Hi,
I tried to use txfax to send several faxes at the
same time.
It seams, that one can't send more than 3 faxes at once,
or one risks to get 50% and more aborted faxes due to
errors.
The CPU usage is below 97%.
I tried with Opteron and IntelP4: same result.
Ok, I know, that faxing via a digita
On Wed, Sep 07, 2005 at 09:32:58AM +0200, Christian Richter wrote:
> Hi List,
>
> we've made a litle script which is called /etc/init.d/zaptel. It scans
> the pci bus and creates by request a /etc/zaptel.conf and a
> /etc/asterisk/zapata.conf.
>
> Also it loads the modules automagically.
>
> I
Tzafrir Cohen wrote:
On Wed, Sep 07, 2005 at 09:32:58AM +0200, Christian Richter wrote:
Hi List,
we've made a litle script which is called /etc/init.d/zaptel. It scans
the pci bus and creates by request a /etc/zaptel.conf and a
/etc/asterisk/zapata.conf.
Also it loads the modules automa
YT Lim wrote:
We have tried Asterisk 1.0.9 on FC4 and have never
been able to get CAPI (with Fritz card, fcpci) to work
properly. Apart from that Asterisk works fine in
switching internal calls. But it's useless if we can't
make outgoing calls on our ISDN line.
We are considering abandoning FC4
Hello!
If I have more than a hundred analog telephones (analog lines) that need
to be connected to Asterisk PBX, what kind of hardware do I need, and
where can I buy it?
Thanks in advance!
___
--Bandwidth and Colocation sponsored by Easynews.com --
Hi,
try to search with google for "channelbank" or something similar.
Giorgio
Josip Gracin wrote:
Hello!
If I have more than a hundred analog telephones (analog lines) that
need to be connected to Asterisk PBX, what kind of hardware do I need,
and where can I buy it?
Thanks in advance!
__
Hi,
can you be a little clearer???
Every VoIP hardphone can be connected to Ethernet except for USB models.
Giorgio
Alex wrote:
Is there any VoIP phones available which can be plugged directly to
the Ethernet network?
___
--Bandwidth and Colocation
try google for VoIP Phone ;-)
or here: http://www.voip-info.org/tiki-index.php?page=Asterisk+phones
On Wednesday 07 September 2005 11:19, Alex wrote:
> Is there any VoIP phones available which can be plugged directly to the
> Ethernet network?
>
> ___
>
Is there any VoIP phones available which can be plugged directly to the
Ethernet network?
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/
What is the proper way of adding hints to multiple extensions?
In my case extensions are the same as the sip usernames, while as per
http://www.voip-info.org/tiki-index.php?page=Asterisk%20presence
exten => 1234,hint,SIP/1234 works,
exten => _1,hint,SIP/${EXTEN} doesn't. Not sure if I ca
Il modo migliore è quello di utilizzare AMI (Asterisk Mang. Interface)
Buon lavoro
2005/9/7, Stefano Blasco <[EMAIL PROTECTED]>:
>
>
>
> Hi all,
>
> i have a question:
>
>
>
> what about a CTI implementation with Asterisk.
>
> I've been looking for info in www.voip-info.org and in
On Wed, Sep 07, 2005 at 10:10:05AM +0100, John Daragon wrote:
> YT Lim wrote:
> >We have tried Asterisk 1.0.9 on FC4 and have never
> >been able to get CAPI (with Fritz card, fcpci) to work
> >properly. Apart from that Asterisk works fine in
> >switching internal calls. But it's useless if we can't
Vahan Yerkanian wrote:
> What is the proper way of adding hints to multiple extensions?
>
>
> In my case extensions are the same as the sip usernames, while as per
> http://www.voip-info.org/tiki-index.php?page=Asterisk%20presence
>
> exten => 1234,hint,SIP/1234 works,
>
> exten => _1,hint,
Brian Capouch wrote:
> I am wondering if there are any tricks getting the Cisco ATAs to do
> "distinctive rings" via the ALERT_INFO variable?
>
> I have seen some contradictory information in the Wiki, and I tried the
> example there. I then sniffed the connection between the server and the
> ATA
Hello list,
I am trying to connect an old ISDN PBX to my asterisk system.
The setup includes an asterisk (1.0.9) running on the Soekris
hardware, with an ISDN card (Billion BIPAC PCI), and I run
zaphfc-bristuff-0.2.0-RC8k kernel module in NT mode (modes=1).
When I connect an ISDN phone to the car
Hy,
I have a network with WIFI communication and VHF/ HF channels.
I have integrated asterisk in the network using SIP, ZAP and IAX2
channels for WIFI communications, but I don't Know How I could integrate
the VHF/ HF channels.
I have heard speaking about app_rpt project, but I don't Know very
The local CATV company is offering internet using packet cable, and they
have asked about using Asterisk in their office. Is there any working
packet cable interface?
--
Chris Mason
NetConcepts
(264) 497-5670 Fax: (264) 497-8463
Int: (305) 704-7249 Fax: (815)301-9759
Cell: 264-235-5670
Yahoo
hi
i get these messages every now and then
"-- PROGRESS with cause code 34 received"
wtf is this?
roy
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mai
Tzafrir Cohen wrote:
On Wed, Sep 07, 2005 at 10:10:05AM +0100, John Daragon wrote:
YT Lim wrote:
We have tried Asterisk 1.0.9 on FC4 and have never
been able to get CAPI (with Fritz card, fcpci) to work
properly. Apart from that Asterisk works fine in
switching internal calls. But it's useles
Done. Not sure if picked categories under SIP Mantis correct but here it
is: http://bugs.digium.com/view.php?id=5149
VY
Olle E. Johansson wrote:
File a bug report if it does not work. I think it would be a good idea
if it works, even though I usually don't recommend using the extension
as the
1 & 2. You could use the dial macro. Check out the screening macro on
http://www.voip-info.org/tiki-index.php?page=Asterisk+cmd+Dial
More 1. To send tones, use SendDTMF:
http://www.voip-info.org/tiki-index.php?page=Asterisk+cmd+SendDTMF
A little more 1. I'm not sure the best way to pause for a
I'm not sure about why, but it's it is hardcoded into asterisk. Back
when it was a limit of 31, I searched around and increased the value
on my box and recompiled. It did not seem to adversely affect the
system.
On 9/7/05, René Mayorga <[EMAIL PROTECTED]> wrote:
> Hi,
> I'm working with this iss
Buenos días quiero
que ya no me llegue mas correo electrónico de la lista Asterisk, como puedo
hacerlo
Gracias
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.d
Unsubscribe directions are at the bottom of each email.
Translation via google: Las direcciones de unsubscribe están en el
fondo de cada email.
On 9/7/05, Will Velez <[EMAIL PROTECTED]> wrote:
> Buenos días quiero que ya no me llegue mas correo electrónico de la lista
> Asterisk, como puedo ha
2 ways.
1) buy into the app_rpt system. They have a bespoke card for your PC
that can drive radio's etc. It's mainly aimed at repeater owners.
2) connect a phone patch between an ATA and your HF rig. This solution
is currently being used to provied phone services from a few Red Cross
shelter
Why do you care about an interface? The job of your cable modem/bridge
should be to convert from your local ethernet to their peculiar data
network.
/JFDI
Mark
Chris Mason (Lists) wrote:
The local CATV company is offering internet using packet cable, and they
have asked about using Asterisk
Being a German package this would make sense. ISDN is DT's circuit of
choice and can be found in the vast majority of businesses across Der
Fatherland.
John Daragon wrote:
YT Lim wrote:
We have tried Asterisk 1.0.9 on FC4 and have never
been able to get CAPI (with Fritz card, fcpci) to wor
Following on from my below email, things
have taken another bizarre twist……
I have continued getting the error when
2092 tries to listen to messages by dialing .
--Executing VoiceMailMain
(“SIP/2092-6918”, “2092”) in new stack
--Playing ‘vm-password’
(language ‘en’)
WARNING: a
I always get an unable to read password error if I hang up without
entering a password when prompted. Maybe is this what you are doing?
Even if you hear nothing, it is probably still expecting a password to
be entered.
On 9/7/05, Aisling <[EMAIL PROTECTED]> wrote:
>
>
> Following on from my be
Current setup
2 x X100P cards connected to 2 analogue lines
Using prefix 7 and 8 before number
SIP gateway to SipGate to make VoIP calls
Using prefix 9 before number.
Is it possible so that if I dial a number:
"0800 8000 8000"
that it will try to route the call over the first analogue line,
I hear absolutely nothing. The problem is I don't even get a chance to
enter the password. I dial and press send on my phone. Immediately
the following error appears on the asterisk console:
--Executing VoiceMailMain ("SIP/2092-6918", "2092") in new stack
--Playing 'vm-password' (language 'en
Hallo
There is the scenario:
client server
--- REGREQ with expires=60 --->
.
<-- REGACK with expires=0
I did not see such situation previously, I mean PBX always responded with
expires!=0.
What does it mean? How should it be treated?
greetings
Hi,
I'm running Asterisk 1.0.7 and would like to add Speex support. I
downloaded Speex 1.0.5, installed and recompile Asterisk again.
Now trying from X-Lite to connect using Speex but getting lot of weird
erros on Asterisk console:
Sep 7 15:03:25 WARNING[28605]: codec_speex.c:166 speextolin_fra
Hello,
I got 3 Polycom 300 phones, and upgraded to the latest firmware provided by the
reseller.
This is my first experience with Polycom and I cannot make them register in my
Asterisk Box.
I followed every advice I found (including separating [user] and [peer] in
sip.conf.
Using ethereal,
Angus - I have several mini-itx systems based on the Epia MII6000
(fanless) system.
They all run great, and I have no problems. I also run 'mpg123' with
several mp3s.
I run it in an embedded configuration (in house).
However, I do remember one board that I got where the heatsink on the
CPU wa
[EMAIL PROTECTED]
Simoni,
Thank you for your copersation. If you need routes in Brazil I have very
high quality ones ok...
Atenciosamente
Reduzimos ao mínimo a sua conta de Telefone
Liguetel - ITN Info - 15 anos em Telecomunicações
Diretoria Comercial - Newton Medina
PABX11.3891.
Wow, first of all, if you have a hundred analog lines, you are doing
yourself a disservice.a 4 T1's would be much much cheaper, and much
easier to manage.
Anyway, for 100 analog lines, I'd get 3 adit 600 channel banks and fill
them with FXO cards, and then buy 1 TE406 Quad T1 card for your ast
CVS HEAD/Asterisk 1.2: Is there a way to have the entire extensions.conf file coming from the realtime? It appears that RealTime for the extensions.conf file is on a context by context basis, but you have to create each new context in the
extensions.conf file then add a "switch => Realtime" line
Is then possible using app_rpt solution for both VHF and HF channels?
Regards.
Mark Phillips escribió:
2 ways.
1) buy into the app_rpt system. They have a bespoke card for your PC
that can drive radio's etc. It's mainly aimed at repeater owners.
2) connect a phone patch between an ATA and
Well, I just answer myself here:
Since the ISDN PBX is just the same as ISDN phone as far as the
asterisk is concerned, NT mode on the ISDN card should be used as
well.
The difference is that the phone uses p2mp (point to multi point)
protocol, as the PBX uses p2p (point to point) protocol.
Using
The VHF or HF is determined by the radio equipment you have attached, not the
software.
-Jonathan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of makevuy
Sent: Wednesday, September 07, 2005 10:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discu
I use Centos 3.5 with great success. It is a RHEL3 binary compatible clone.
Don't know if I would use development cutting edge software in the
enterprise.
--- John Daragon <[EMAIL PROTECTED]> wrote:
> Tzafrir Cohen wrote:
> > On Wed, Sep 07, 2005 at 10:10:05AM +0100, John Daragon wrote:
> >
>
Hi
I am testing a voip gateway product with Asterisk. We are experiencing
CONNECT ACK timer (T313) timing out on the Asterisk side when an incoming
call is received on the T1-PRI interface. The call is immediately routed to
voice mail.
This doesn't happen if I connect another PRI test equipment
I’ve got some modifications I’ve
made to asterisk that create a “global switch”. It essentially
just adds a check to the end of pbx_find_extension() that will try to look the
extension up in the database if it’s not found in one of the includes or in
any of the switches attached to the con
I fixed the problem using preg_replace but you are right, I completely
forgot We are using open source ! :) silly of me, I should have checked
that.
Thx for reopening my eyes Christoph
|-Original Message-
|From: [EMAIL PROTECTED]
|[mailto:[EMAIL PROTECTED] On Behalf Of
|Christoph Eic
> CVS HEAD/Asterisk 1.2: Is there a way to have the entire
> extensions.conffile coming from the realtime?
Yes. Go read the wiki on RealTime Static.
-Matthew
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
> 1 phone 'ringes' a bit cripled (instead of ring-ring... ring-ring..., it
> does 'ring-ri... ri ring... ri...)
> and the 3rd one does not ring at all when Asterisk says 'Ringing Zap/6'.
> However, when I do an 'off-hook' on this phone, I get tone signal and
> can dial and talk perfectly.
>
> I'm running Asterisk 1.0.7 and would like to add Speex support. I
> downloaded Speex 1.0.5, installed and recompile Asterisk again.
>
> Now trying from X-Lite to connect using Speex but getting lot of weird
> erros on Asterisk console:
>
> Sep 7 15:03:25 WARNING[28605]: codec_speex.c:166 spee
I am getting ready to spec out a replacement for a Merlin Legend system
with asterisk. There are a couple of things that holding me up that
hopefully someone here can answer.
1. How well do modems work through a channel back to a PRI/T1
interface?
2. Is there a decent receptionist phone (I don
I don't know why Darren syas 3 Adits since each one can handle 48
FXO/FXS channels, so 2 make 96. Anyhow each Adit connects to 2 T1
ports on a TE405/6. With Adit 600 I don't see why TE406 is required
since I believe the Adit 600 will take care of the echo, I might be
wrong on this last one about th
Sorry my mistake. The span to provider is pri_cpe, and the span to the
avaya is pri_net.
On 9/7/05, Rod Bacon <[EMAIL PROTECTED]> wrote:
> It DOES help, thanks.
>
> Except for this
>
>
> > the only difference between the first set of channels (1-23) and the
> > second set of channels (25-47
It states that the conf file overrides the static db info, but what about the ael file? Does that override also?
BTW, "RealTime Static"...talk about oxymoron :-) Gotta love it!
Flobi
On 9/7/05, Matthew Boehm <[EMAIL PROTECTED]> wrote:
> CVS HEAD/Asterisk 1.2: Is there a way to have the enti
The issue appears to be between the Cisco 7940 and the
ArtDio IPF-2000, when a call is initiated between these phones the ArtDio phone
receives the audio stream fine from the Cisco, but the Cisco can’t hear
anything from the ArtDio, until the Cisco user places the call on hold and then
pick
Darren Wright wrote:
Wow, first of all, if you have a hundred analog lines, you are doing
yourself a disservice.a 4 T1's would be much much cheaper, and much
easier to manage.
Let me clear this up a little bit. There are hundreds of telephone
devices inside the building, all connected to
Indeed I do - but I read bug 2023 before posting and thought it was to
do with the system-wide problem, not with occasional occurrences. I'll
go back and read it again. Has the problem been solved with the 411P?
Regards,
--
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
We
Hi Jorge -
I got 3 Polycom 300 phones, and upgraded to the latest firmware
provided by the reseller.
This is my first experience with Polycom and I cannot make them
register in my Asterisk Box.
I followed every advice I found (including separating [user] and
[peer] in sip.conf.
Using
Okay, this doesn't seem to be working. I've gone and deleted my ael
file also. I do know my MySQL is set up cause I have my sip, iax and
voicemail going through it too.
here's the line in extconfig.conf:
[settings]
extensions.conf => mysql,asterisk,pbx_realtime_extensions
in pbx_realtime_exten
Hi Robert,
Do you have the sample script for locking the extension?
Thanks,
Stephen
Robert Goodyear wrote:
On Aug 18, 2005, at 3:07 AM, Stephen wrote:
Hi All,
How can I lock the extension in Asterisk?
For example , my extension is 1000 and I am away for business trip.
I want to lock my e
Olle E. Johansson wrote:
Try setting _ALERT_INFO
Worked perfectly, thanks.
B.
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asteris
Hi,
I am running Asterisk in production mode but unfortunately every few
days or so, it crashes, presumably...
Presumably because, when the phones stop working and I look for the
cause, asterisk is no longer running. Asterisk logs and
/var/log/messages contain no hints at all.
How can I ge
About my System:
2 * HFC Cards with misdn. 1 NT mode, 1 TE mode
1 * Sip-Provider (1und1)
On NT-Port à Ritto
(Elmeg) PBX
On TE-Port à NTBA
About my Problem:
When a SIP-Call from a phone connected to the Ritto PBX is
in progress and someone calls on the ISDN-Line, the gree
I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS).
These connect to a Digium TE210P card. I'm running kernel 2.6.10
and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today.
The results are the same for all versions:
Right after I reboot, and modprobe wct4xxp, my a
Okay, after noticing an error on this mysql statement after i switched to odbc:
SELECT * FROM
pbx_realtime_extensions
WHERE filename='extensions.conf' and commented=0
ORDER BY filename,cat_metric desc,var_metric asc,category,var_name,var_val,id
I added those fields and reloaded...* immediately
Nevermind, I figured out that the table is used way differently when
doing static. Here's my fixed table. I'll try to explain this in the
voip-info doc.
id cat_metric var_metric commented filename category var_name var_val
1 0 0 0 extensions.conf default exten _.,1,NoOp(Testing)
On Wed, September 7, 2005 18:11, Josip Gracin said:
> Darren Wright wrote:
>> Wow, first of all, if you have a hundred analog lines, you are doing
>> yourself a disservice.a 4 T1's would be much much cheaper, and much
>> easier to manage.
>
> Let me clear this up a little bit. There are hundre
You asked how to connect lines, so he answered that question. The answer
is basically the same just change the FXO in the channel bank to FXS.
-Jonathan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Josip
Gracin
Sent: Wednesday, September 07, 2005 12:11
I don't see your swich statement anywhere.
You must define a context [default] then add in the correct switch=>
statement.
-Matthew
> From: Flobi <[EMAIL PROTECTED]>
> Reply-To: <[EMAIL PROTECTED]>, Asterisk Users Mailing List - Non-Commercial
> Discussion
> Date: Wed, 7 Sep 2005 12:18:26 -040
The wiki doc's are correct. You are trying to combine two different methods
of pulling RealTime extensions and that is why it isn't working as you are
expecting.
Pick 1 method and all will be revealed. Both are very simple to do.
-Matthew
> From: Flobi <[EMAIL PROTECTED]>
> Reply-To: <[EMAIL PRO
Jonathan k. Creasy wrote:
You asked how to connect lines, so he answered that question. The answer
is basically the same just change the FXO in the channel bank to FXS.
Well, actually, I said: "If I have more than a hundred analog telephones
(analog lines) that need..." But, that doesn't hel
Ohmy bad...I picked up the thread later :)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Josip
Gracin
Sent: Wednesday, September 07, 2005 2:16 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] How to connec
It's not that, it's just that the wiki wasn't very clear on the fact
that all the tables for a static load had to be the same. I had
thought that I was supposed to use the table on this page:
http://www.voip-info.org/tiki-index.php?page=Asterisk+RealTime+Extensions
even when doing realtime static,
Which version of * are you using? I had a problem with 1.0.7 crashing
unexplainably at one point, but 1.0.9 was out then and I upgraded and
it stopped.
On 9/7/05, Arik Funke <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I am running Asterisk in production mode but unfortunately every few
> days or so, it
Address lookup
canonical name asterisk.org.
aliases
addresses 216.27.40.102
Service scan
FTP - 21Error: TimedOut
SMTP - 25 Error: ConnectionRefused
HTTP - 80 Error: ConnectionRefused
POP3 - 110 Error: TimedOut
NNTP - 119 Error: TimedOut
digium.com is
I'm not having any problems connecting to asterisk.org port 80.
On 9/7/05, Martin <[EMAIL PROTECTED]> wrote:
>
> Address lookup
> canonical name asterisk.org.
> aliases
> addresses 216.27.40.102
>
> Service scan
> FTP - 21Error: TimedOut
> SMTP - 25 Error: ConnectionRefuse
I don't believe 2023 has anything to do with the 411P; it was basically
an digium analog card issue (eg, TDM04b & x100p).
Based on my tests and findings, the issue is the digium cards record
voicemail messages at a very low audio level (very different from
recording a voicemail from a sip phone).
On Wednesday 07 September 2005 13:47, Flobi wrote:
> I'm not having any problems connecting to asterisk.org port 80.
>
They came up again. Finally. That check wasn't from where I am but another
location once I couldn't get onto the site. Nothing more to see here...move
on ;-0
Regards...Mart
On Wednesday 07 September 2005 14:41, Rich Adamson wrote:
> I don't believe 2023 has anything to do with the 411P; it was basically
> an digium analog card issue (eg, TDM04b & x100p).
>
> Based on my tests and findings, the issue is the digium cards record
> voicemail messages at a very low audio l
[EMAIL PROTECTED] wrote on 06/28/2005 07:52:50 AM:
> I was able to raise the volume from inaudible to acceptable by
> increasing the RxGain in zapata.conf by 5db. I'd rather not go the
> uncomressed wav route, as it will chew up storage in my email system.
I know I'm way behind on reading this,
At 16:16 9/6/2005 -0700, Jesse Keating wrote:
On Tue, 2005-09-06 at 17:41 -0500, Doug wrote:
> After I did this, it appears that the Web interface
> for the phone won't change the settings, nor will
> it actually reboot the phone now. What do I have
> to set on the phone itself, so I can update
Hello.
Just rx'd the sip - aastra 9133i.
Haven't done sip before.
My initial attempt at setup has failed.
"No Service"
Anyone want to contact me off-list or on irc ?
Regards...Martin
___
--Bandwidth and Colocation sponsored by Easynews.com --
Aster
> [EMAIL PROTECTED] wrote on 06/28/2005 07:52:50 AM:
>
> > I was able to raise the volume from inaudible to acceptable by
> > increasing the RxGain in zapata.conf by 5db. I'd rather not go the
> > uncomressed wav route, as it will chew up storage in my email system.
>
> I know I'm way behind o
On Wed, 2005-09-07 at 14:18 -0500, Doug wrote:
>
> I again followed instructions here:
> http://www.voip-info.org/tiki-index.php?page=Polycom+SoundPoint+IP+501
So yeah, the instructions are a bit misleading. I had to set register
to yes prior to the line information stuff. Without that the phon
On Wed, Sep 07, 2005 at 01:47:49PM +0200, Roy Sigurd Karlsbakk wrote:
> hi
>
> i get these messages every now and then
>
> "-- PROGRESS with cause code 34 received"
>
> wtf is this?
Nothing to see here, move along :-)
Seriously though, it's basically just and interesting message to see. The c
I can't understand why anyone would use Fedora Core. Sure it 'can be' quite
stable depending on what your doing but it is not considered a production
ready OS.
Any of the Red Hat Enterprise edition clones such as CentOS or White Box
Enterprise Linux are a MUCH better alternative IMHO. I don't ha
Can anyone suggest where I might begin looking for an answer please?
I have just installed a TDM400P (2x FXS and 1x FXO modules installed)
The first problem is that it does not seem to be able to detect if the
remote party has hung up when a call comes through on the FXO. For example,
if someone
Hi All,
For sometime now I've been searching the wiki and googling, but I think I'm
missing some of the very important answers. So I'll have to ask this to the
list.
I'm trying to decide on the right motherboard and processor. Here are my
questions:
1. Would I have problems with all-onboar
Hi
Can you give me any hint on with file of the source you modify that
Value???
tnx
On Wed, 2005-09-07 at 08:18 -0400, Flobi wrote:
> I'm not sure about why, but it's it is hardcoded into asterisk. Back
> when it was a limit of 31, I searched around and increased the value
> on my box and recomp
Does anyone currently use Vonage with Asterisk? I've tried to set
it up but it looks like Asterisk (at least the version that I have)
does not handle well the SIP call dialog, sending a BYE with the wrong
tag. As a result, when I hang up, Vonage sends back a 400 Bad
Request and the call on the PS
Why don't you try this:
http://pbxfreeware.com/app_intercept.c
On 9/7/05, René Mayorga <[EMAIL PROTECTED]> wrote:
> Hi
> Can you give me any hint on with file of the source you modify that
> Value???
>
> tnx
>
> On Wed, 2005-09-07 at 08:18 -0400, Flobi wrote:
> > I'm not sure about why, but it's
1 - 100 of 143 matches
Mail list logo