hi,
Although I changed those parameters. Asterisk does not detect "hangup
signal"
signalling = fxs_ks
busydetect = yes
busycount = 3
busypattern = 500,500
answeronpolarityswitch = no
hanguponpolarityswitch = yes
callprogress=no
progzone=in
usecallerid=yes
cidstart=ring
callerid=asreceived
group=0
On Fri, Jul 30, 2010 at 07:15:00AM -0400, Fred Posner wrote:
> On Jul 30, 2010, at 5:04 AM, Andraž wrote:
>
> > Ok, problem is another, when I run configure, it write this:
> > checking for tds_version in -ltds... no
> > configure: ***
> > configure: *** The FreeTDS installation on this system app
Hi ,
Thanks danny nicholas. Finally we get the things done with following.
If i specify busypatten=500,500 then asterisk does not recognize hang up
signal. After removing it only all are working fine.
I choosed 2nd option as per your suggestions.
working chan-dahdi.conf:
Hi ,
Thanks danny nicholas. Finally we get the things done with following.
If i specify busypatten=500,500 then asterisk does not recognize hang up
signal. After removing it only all are working fine.
I choosed 2nd option as per your suggestions.
working chan-dahdi.conf:
Hi Group,
actual i have a transcode problem and i have no idea to solve this. All my wav
files are alaw encoded and i allow only alaw codec.
But sometimes the WriteFormat is slin and if i recall the same number the
WriteFormat is alaw for the Channel.
Why the channel has sometimes slin and some
Now that I check again, I see that DNSMasq for DHCP and DNSMasq for DNS is
NOT enabled. Which one should I enable and also can you please detail what
DNSMasq really does?
With my situation, only some of the phones go off randomly. But it is a few
specific extensions I think. Not the server itself.
On 7/30/2010 11:37 AM, unsero...@aol.com wrote:
> Hi all,
>
> I have two questions regarding DUNDi and Asterisk Realtime. I have
> successfully set up DUNDi on my two Asterisk boxes, which means
> "dundi show peers" on each box shows the other box as known and "dialplan
> show dundiextens" shows
On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
> QueueMetrics is actually free (as in beer) for very small call centers and
> individual hackers.
Oh really! I didn't know that! Very nice.
What is considered a "small" call centre? Are we talking up to around 5
agents or something? Is there a limit on
On 7/30/2010 2:00 PM, Philipp von Klitzing wrote:
> Hi there!
>
> David has put up a patch to fix the STUN issues that has plagued Asterisk
> 1.6 ever since that feature was introduced. Now we need testers to verify
> the patch, so please grab the patch (or check out the SVN branch) and add
> your
On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
> Hi. I am using *1 in features to initiate a mix monitor recording.
> However, when I hit *1, the callee hears the courtesy tone which I have,
> so I know when the recording is started or stopped. This is a problem,
> particularly in automated s
On 31/07/10 16:06, bruce bruce wrote:
> Now that I check again, I see that DNSMasq for DHCP and DNSMasq for DNS
> is NOT enabled. Which one should I enable and also can you please detail
> what DNSMasq really does?
>
Look at
http://www.dd-wrt.com/wiki/index.php/DNSMasq_as_DHCP_server
DC
--
_
> Hi all,
>
> I have two questions regarding DUNDi and Asterisk Realtime. I have
successfully set up DUNDi on my two Asterisk boxes, which means
> "dundi show peers" on each box shows the other box as known and "dialplan
> show
dundiextens" shows the extensions on each box configured in s
On 31 July 2010 15:28, Leif Madsen wrote:
> On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
>> QueueMetrics is actually free (as in beer) for very small call centers and
>> individual hackers.
>
> Oh really! I didn't know that! Very nice.
>
> What is considered a "small" call centre? Are we talking up
Hi List,
It would be great if someone can share the TE220 card dahdi
configuration file.
Im using an E1 line. I know most of users find it difficult to get the
correct config file.
Im putting my efforts and will surely share my config file once it gets
working.
Thanks & Regards,
Rushikesh
On Sat, Jul 31, 2010 at 09:13:46PM +0530, Rushikesh wrote:
> Hi List,
>
>
> It would be great if someone can share the TE220 card dahdi
> configuration file.
> Im using an E1 line. I know most of users find it difficult to get the
> correct config file.
A. Please don't reply to an existing mes
Leif Madsen wrote:
> On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
> > Hi. I am using *1 in features to initiate a mix monitor recording.
> > However, when I hit *1, the callee hears the courtesy tone which I have,
> > so I know when the recording is started or stopped. This is a problem,
2 users. So, it's probably never used as a free version as probably there
are no 2 seat call centers that can survive this economy. But, it should
great for testing.
On Sat, Jul 31, 2010 at 10:28 AM, Leif Madsen
wrote:
> On 7/30/2010 5:49 AM, Lenz Emilitri wrote:
> > QueueMetrics is actually free
On 7/31/2010 11:56 AM, cov...@ccs.covici.com wrote:
> Leif Madsen wrote:
>
>> On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
>>> Hi. I am using *1 in features to initiate a mix monitor recording.
>>> However, when I hit *1, the callee hears the courtesy tone which I have,
>>> so I know when t
Leif Madsen wrote:
> On 7/31/2010 11:56 AM, cov...@ccs.covici.com wrote:
> > Leif Madsen wrote:
> >
> >> On 7/29/2010 8:30 PM, cov...@ccs.covici.com wrote:
> >>> Hi. I am using *1 in features to initiate a mix monitor recording.
> >>> However, when I hit *1, the callee hears the courtesy tone w
Hi,
Every time I do span debug I'm baffled by the information thrown at
me. Does anyone know how to make sense of it ?
Any link or information on how to read span debug would be of great
use.
Thanks
Chetan Meshram
--
_
20 matches
Mail list logo
