Re: [asterisk-users] help for a new user

On Wed, 25 Aug 2010, Terry wrote: I am trying to piece together a solution to do the two things: 1. receive faxes on a bunch of numbers, about 10,000 2. receive voicemails from people on the same numbers At this point, I am just trying to see if what is required can be done. The faxes need to

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

Thanks Steve for clearing this confusion. Zeeshan A Zakaria -- www.ilovetovoip.com On 2010-08-25 3:16 PM, "Steve Edwards" wrote: On Wed, 25 Aug 2010, Zeeshan Zakaria wrote: > Apparently all Linux files have a mime type informati... Linux files are just a byte stream. They do not have "mime ty

Re: [asterisk-users] help for a new user

On Wed, Aug 25, 2010 at 5:22 PM, Steve Edwards wrote: > On Wed, 25 Aug 2010, Terry wrote: > >> I am trying to piece together a solution to do the two things: >> >> 1. receive faxes on a bunch of numbers, about 10,000 2. receive >> voicemails from people on the same numbers >> >> At this point, I a

Re: [asterisk-users] 1.6 and asterisk gui

On 2010-08-25 14:53, Terry wrote: I will want fax for asterisk support. I thought that GUI support for that was only in asterisk-gui. No? I'm using Fax for Asterisk and FreePBX. On FreePBX, there a module named "Fax Configuration" for that. -- *Christian Tardif*

Re: [asterisk-users] AMR Codec

On Wed, 2010-08-25 at 14:04 -0400, Matt wrote: > Has anyone successfully compiled the AMR codec into an Asterisk > install, and if so, what steps did you take? > -- > _ Just noticed that packman has prebuild packages: (with src-r

Re: [asterisk-users] help for a new user

On Wed, 25 Aug 2010, Terry wrote: > I am trying to piece together a solution to do the two things: > > 1. receive faxes on a bunch of numbers, about 10,000 2. receive > voicemails from people on the same numbers > > At this point, I am just trying to see if what is required can be done. > > The f

[asterisk-users] help for a new user

Hello, I am trying to piece together a solution to do the two things: 1. receive faxes on a bunch of numbers, about 10,000 2. receive voicemails from people on the same numbers At this point, I am just trying to see if what is required can be done. The faxes need to be received and put into PDF

[asterisk-users] CDR Help

Hello, I've posted about this a few months back but I didn't understand the answer properly and only just got round to sorting it out. My question is, when I dial out to a few numbers at the same time, the CDR lastdata for the call looks like this:- SIP/07957543...@supplier&SIP/07957123...@sup

Re: [asterisk-users] ODBC Voicemail storage

No, I didn't. On Wed, Aug 25, 2010 at 4:20 PM, Tilghman Lesher wrote: > On Wednesday 25 August 2010 07:27:58 Andraž wrote: > > I have a strange problem. I'm using Asterisk 1.4.xx with ODBC storage > > (FreeTDS -> Mssql 2008 database). Everything it's working fine, but > > sometimes I receive th

[asterisk-users] Quick Question - Jabra Headset and Aastra 53i - Where is the speaker/headset enable setting on Aastra UI?

Hi Everyone, I can connect the Jabra GN2124 + GN2100 (smart cord) to the Aastra 53i receiver port and I get a tone. But when I connect it to the headset port there is no tone. I am running firmware 2.4 and I can't seem to find that DHSG, EHS or whatever the setting maybe called to enable to get th

Re: [asterisk-users] 1.6 and asterisk gui

The GUI is still under development even today. You may want to look at "Asterisk GUI project discussion" ~ Andrew "lathama" Latham lath...@gmail.com * Learn more about OSS http://en.wikipedia.org/wiki/Open-source_software * Learn more about Linux http://en.wikipedia.org/wiki/Linux * Learn mor

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

On Wed, 25 Aug 2010, Zeeshan Zakaria wrote: > Apparently all Linux files have a mime type information stored in them, > which can be checked using command: > > file -i Linux files are just a byte stream. They do not have "mime type information stored in them." "file" works by examining the f

Re: [asterisk-users] 1.6 and asterisk gui

On Wed, Aug 25, 2010 at 7:38 AM, Paul Belanger wrote: > On Wed, Aug 25, 2010 at 8:26 AM, Tim Nelson wrote: >> FreePBX is big and has a lot of dependencies whereas Asterisk GUI is tiny >> and only requires Asterisk itself to operate. For most installations, this >> is not a problem. But, there is

[asterisk-users] Asterisk 1.6.1.17 ACK/BYE question

We're running Asterisk 1.6.1.17 for our campus voicemail server and Juniper M120s as our SBC. Unanswered calls, which arrive via the SBC, are diverted to voicemail using a 302 redirect when the called party doesn't answer. In this case the caller is able to hear the greetings and begin to lea

[asterisk-users] AMR Codec

Has anyone successfully compiled the AMR codec into an Asterisk install, and if so, what steps did you take? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introducto

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

It did the trick. Thanks a lot for solving this annoying problem. Yes, it was invisible ^M characters, which I could see in Vim, but not in vi. Now 'ael reload' ouput is how it should be. Zeeshan A Zakaria -- www.ilovetovoip.com On 2010-08-25 1:29 PM, "Rodrigo Lang" wrote: Use the command "apt

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

Use the command "aptitude install tofrodos" to install dos2unix. This command get the file and clear the "^M". Regards, Rodrigo Lang. 2010/8/25 Zeeshan Zakaria > Actually I have found the problem, and leanred some new stuff along with > it. > > Apparently all Linux files have a mime type infor

Re: [asterisk-users] How to debug this specific issue?

On Wednesday 25 August 2010 11:38:27 Steve Davies wrote: > On 25 August 2010 08:22, Matt Riddell wrote: > > On 25/08/10 7:20 PM, Tilghman Lesher wrote: > >>> I really thought that the canary should have sounded if Asterisk got in > >>> a loop - or maybe that only happens with high priority? > >> >

Re: [asterisk-users] Should I move to 1.6 or 1.8, or stay with 1.4?

This info was useful. So now I have more than a year before I can think about switching to a newer version. Zeeshan A Zakaria -- www.ilovetovoip.com On 2010-08-25 12:34 PM, "Leif Madsen" wrote: On 10-08-24 09:59 AM, Gareth Blades wrote: > Zeeshan Zakaria wrote: > > If you are planning to move

Re: [asterisk-users] How to debug this specific issue?

On 25 August 2010 08:22, Matt Riddell wrote: > On 25/08/10 7:20 PM, Tilghman Lesher wrote: >>> I really thought that the canary should have sounded if Asterisk got in >>> a loop - or maybe that only happens with high priority? >> >> The canary only runs in high priority mode, and it's only able to

Re: [asterisk-users] Should I move to 1.6 or 1.8, or stay with 1.4?

On 10-08-24 09:59 AM, Gareth Blades wrote: > Zeeshan Zakaria wrote: > > If you are planning to move then perhaps look at 1.6 to give you a > longer lifecycle with that release. > I wouldnt go with 1.8 as I dont believe it is out of beta yet or if it > is, it is only just and I wouldnt risk it in a

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

Actually I have found the problem, and leanred some new stuff along with it. Apparently all Linux files have a mime type information stored in them, which can be checked using command: file -i For my extensions.ael, which I copied from a different server, the mime type is 'text/x-c' whereas all

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Wednesday, August 25, 2010 11:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] AEL -

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

That's what I understood too from this one and probably only related google search result, but even if I have just 3-4 lines of code, the error is still there. It is all English characters, so UTF-8 compatibility issue should not be there. I am sure there is some small little config change is requi

Re: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex:Unhandled char(s):

>From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Zeeshan Zakaria >Sent: Wednesday, August 25, 2010 10:24 AM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: [asterisk-users] AEL - what is error: ael.flex:647 ael_yylex

Re: [asterisk-users] Should I move to 1.6 or 1.8, or stay with 1.4?

Thank you list for all the valuable input. Based on your input I have decided to stay with 1.4 for now for the production systems. Zeeshan A Zakaria -- www.ilovetovoip.com On 2010-08-24 2:13 PM, "Roderick A. Anderson" wrote: Gordon Henderson wrote: > On Tue, 24 Aug 2010, Roderick A. Anderson w

[asterisk-users] AEL - what is error: ael.flex:647 ael_yylex: Unhandled char(s):

Hi List, When doing 'ael reload' on two servers, which are setup with asterisk 1.4.22 and 1.4.35 respectively, I am getting multiple lines of this strange error: ERROR[15483]: ael.flex:647 ael_yylex: Unhandled char(s): On three other servers with same versions of asterisk, i.e. 1.4.22, I don't s

Re: [asterisk-users] Dahdi install gone wrong

On Wednesday 25 Aug 2010, Doug Dawson wrote: > Todd > To interface directly with the telco pots lines You should be using FXS > modules with FXS signaling. No. FXO is what you need to connect to a phone line. FXS is to connect to and ring an analogue telephone. (S = Signalling; i.e. it can gen

Re: [asterisk-users] Dahdi install gone wrong

Todd To interface directly with the telco pots lines You should be using FXS modules with FXS signaling. Doug D - Original Message - From: Todd Reese To: asterisk-users@lists.digium.com Sent: Monday, August 23, 2010 9:33 AM Subject: Re: [asterisk-users] Dahdi install gone wro

Re: [asterisk-users] ODBC Voicemail storage

On Wednesday 25 August 2010 07:27:58 Andraž wrote: > I have a strange problem. I'm using Asterisk 1.4.xx with ODBC storage > (FreeTDS -> Mssql 2008 database). Everything it's working fine, but > sometimes I receive this error and Asterisk crashes. > > [Aug 25 13:25:13] WARNING[14032] app_voicemail.

Re: [asterisk-users] 1.6 and asterisk gui

On Wed, Aug 25, 2010 at 8:26 AM, Tim Nelson wrote: > FreePBX is big and has a lot of dependencies whereas Asterisk GUI is tiny > and only requires Asterisk itself to operate. For most installations, this > is not a problem. But, there is still a huge gap in the Asterisk GUI world > for something i

[asterisk-users] ODBC Voicemail storage

Hi, I have a strange problem. I'm using Asterisk 1.4.xx with ODBC storage (FreeTDS -> Mssql 2008 database). Everything it's working fine, but sometimes I receive this error and Asterisk crashes. [Aug 25 13:25:13] WARNING[14032] app_voicemail.c: SQL Prepare failed![SELECT COUNT(*) FROM pbx_VoiceMa

Re: [asterisk-users] 1.6 and asterisk gui

- "Christian Tardif" wrote: > Asterisk GUI is no longer supported. But why would you want to use Asterisk > GUI anyway? FreePBX has all you should want to suit most needs. FreePBX is big and has a lot of dependencies whereas Asterisk GUI is tiny and only requires Asterisk itself to opera

Re: [asterisk-users] 1.6 and asterisk gui

On 2010-08-24 19:17, Terry wrote: I'm new to asterisk and this list. The ISO download appears to have 1.6 with the FreePBX GUI but I am looking to use the Asterisk GUI. The only option for the Asterisk GUI is to use 1.4. Is it as simple as installing 1.6 only then using the yum repository to i

[asterisk-users] asterisk-1.8 problem with one-way audio with no nat

Hi. I have a soft phone -- expresstalk-- on a computer in my network and I use the internal ip address of the asterisk box to register the phone. But using asterisk-1.8 between revisions 281912 and 281982 it breaks -- after a few seconds of the call, I lose audio from the asterisk box to my soft

Re: [asterisk-users] Include and Realtime

Looks like I have to go down that route. Ok, thanks Dan -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.

Re: [asterisk-users] Include and Realtime

On Tue, 2010-08-24 at 18:53 -0400, Dan Journo wrote: > > Is your main concern changes being made to the extensions.conf or > > someone having to manually make changes to the extensions.conf? > > Someone having to manually change extensions.conf and then reload asterisk. > If you are allowing a se

Re: [asterisk-users] Asterisk 1.6.1 Won't Play Default ULAW Files

Hi everyone, Just wanted to give a quick update. After a lot of testing, it turns out that my problem was that I didn't have `format_pcm.so` loaded in modules.conf. I was unaware that `format_pcm.so` handled ULAW audio files. I guess when I was looking for unnecessary modules, it stood out as unn

[asterisk-users] Asterisk codec config issue with ALAW

Hi All, I struck with codec config issue. Please suggest me if you have any idea with codec configuration of asterisk. I have simulated Chan phone code of asterisk to my own driver and able to make calls between my own driver and external sip [X-lite: Configured alaw, ulaw] using asterisks pbx.

Re: [asterisk-users] Mobile answer machine cut off

Hey Matt, thanks for the response. I know it sounds impossible. Hell, I sound like a user :) But it *is* happening. And only on the cisco phones. We're trying to lab it up right now. What should I be looking for in the sip debug ? Julian On 25 August 2010 08:17, Matt Riddell wrote: > On 22/08/1

Re: [asterisk-users] AMD message

I took a quick&dirty solution in your case, when I wanted to pick up samples for analyzing AMD. That was full recording of all outgoing calls (application Monitor() ), and then I've selected only the phone numbers which were detected as Answering Machines. On Wed, Aug 25, 2010 at 10:14 AM, Tino w

Re: [asterisk-users] How to debug this specific issue?

On 25/08/10 7:20 PM, Tilghman Lesher wrote: >> I really thought that the canary should have sounded if Asterisk got in >> a loop - or maybe that only happens with high priority? > > The canary only runs in high priority mode, and it's only able to do anything > if high priority scheduling is the cu

Re: [asterisk-users] AMD message

On 25/08/10 7:14 PM, Tino wrote: > Yes, we need to record the message :D So use the Record() application :D -- Cheers, Matt Riddell ___ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/exchange.php (Full ITSP Solu

Re: [asterisk-users] How to debug this specific issue?

On Wednesday 25 August 2010 01:47:43 Matt Riddell wrote: > On 24/08/10 4:42 AM, Steve Davies wrote: > > Hi, > > > > I am happy with the usual GDB backtrace methods and so forth, but have > > an issue that I cannot work out how to trace on 1.6.2.10. > > > > If I use either the Bridge() app, or the m

Re: [asterisk-users] Mobile answer machine cut off

On 22/08/10 10:38 AM, Julian Lyndon-Smith wrote: > Crap, sorry, meant to add that we are running 1.4 svn head > > Julian > > On 21 August 2010 23:38, Julian Lyndon-Smith wrote: >> We are having some strange issue where a call from asterisk dials a >> mobile number. If the number answers, we put t

Re: [asterisk-users] billsec exceeds duration on some calls

On 21/08/10 5:24 AM, A J Stiles wrote: > Can anyone else with a similar setup try running a query such as > SELECT COUNT(*) FROM cdr WHERE calldate LIKE "2010-08-20%" AND > billsec>duration ; > and seeing if they have any calls like this? Nothing on this box (1.4) mysql> SELECT COUNT(*) FROM cdr

Re: [asterisk-users] AMD message

Yes, we need to record the message On Wed, Aug 25, 2010 at 12:35 PM, Matt Riddell wrote: > On 20/08/10 1:52 AM, Tino wrote: > > Hello, > > > > Is there a way to capture the answering machine message when the dialer > > detects the answering machine. > > Record? > > -- > Cheers, > > Matt Riddell

Re: [asterisk-users] AMD message

On 20/08/10 1:52 AM, Tino wrote: > Hello, > > Is there a way to capture the answering machine message when the dialer > detects the answering machine. Record? -- Cheers, Matt Riddell ___ http://www.venturevoip.com/news.php (Daily Asterisk News) http: