Thanks all,
I realised after posting 2 things.. 1) I needed to also cover MOH
outside of meetme. And that 2) theres a bug in 1.4.18 where the
defaults aren't reloaded properly for MOH, and you have to do a server
stop/start to get them to reload.
Thanks,
Adrian
--
Hi,
Has anybody had 1.8 crashing for no reason at all ? It has happened a couple of
times so far and when I check /var/log/asterisk/messages nothing is in there at
all :(
--
Thanks, Phil
--
_
-- Bandwidth and Colocation
Hi,
On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18,
I inserted a new Digium HA8 + B400M card.
My usual installation fails.
I can see it listed :
# lspci -n | grep d161
01:0b.0 0200: d161:8007 (rev 11)
# lspci -vn
01:0b.0 0200: d161:8007 (rev 11)
Subsystem:
Hello everyone,
I have some questions regarding implementing asterisk and my-sql. I'm no
expert at asterisk but I'm going to list up my questions and hopefully someone
will be able to help.
-The people that setup our server made asterisk write the sound files onto the
hard drive, and then
Hello,
maybe is a stupid question but I'd like know if I'm doing some mistake on
IAX trunk configuration.
I have two Asterisk (1.6.2.14) with this configuration:
A (iax.conf)
register = serverb:passw...@192.168.142.246
[servera]
type=friend
host=dynamic
trunk=yes
secret=password
Adrian Marsh wrote:
Thanks all,
I realised after posting 2 things.. 1) I needed to also cover MOH
outside of meetme. And that 2) theres a bug in 1.4.18 where the
defaults aren't reloaded properly for MOH, and you have to do a server
stop/start to get them to reload.
Thanks,
Adrian
Several questions inline - no answers
Edwin Blommaerts wrote:
Hello everyone,
I have some questions regarding implementing asterisk and my-sql. I'm
no expert at asterisk but I'm going to list up my questions and
hopefully someone will be able to help.
-The people that setup our server
Yes John... but I also now find in testing many things broken between my
IAX provider and 1.4.37
Which is a reason to hold back...
Thanks,
Adrian
From: John Novack [mailto:jnov...@stromberg-carlson.org]
Sent: 26 November 2010 13:41
To: Asterisk Users Mailing List - Non-Commercial
I'd probably wipe the phone and start over. My guess is that something else
is wrong as I have used that setting on lots of phones and never had it
reject calls.
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Cassius Smith
Sent:
Edwin Blommaerts wrote:
Hello everyone,
I have some questions regarding implementing asterisk and my-sql. I’m
no expert at asterisk but I’m going to list up my questions and
hopefully someone will be able to help.
-The people that setup our server made asterisk write the
- Original Message -
On Fri, Nov 26, 2010 at 8:00 AM, --[ UxBoD ]-- ux...@splatnix.net
wrote:
Hi,
Has anybody had 1.8 crashing for no reason at all ? It has happened
a couple of times so far and when I check /var/log/asterisk/messages
nothing is in there at all :(
--
On Fri, Nov 26, 2010 at 12:24 PM, --[ UxBoD ]-- ux...@splatnix.net wrote:
- Original Message -
On Fri, Nov 26, 2010 at 8:00 AM, --[ UxBoD ]-- ux...@splatnix.net
wrote:
Hi,
Has anybody had 1.8 crashing for no reason at all ? It has happened
a couple of times so far and when I
I have a server running 1.6.2.13 that uses realtime for most
configurations. Everything works fine except for meetme. When I use
Meetme with Realtime any options specified in the dial plan are ignored.
For example:
exten = 1557,1,Meetme(905,icM(somemusic))
With realtime I just
Hi Carlos,
you have to incllude the conference options (user ad admin) in the meetme
table and put schedule=yes in meetme.conf file
On the dialplan just call the conference like:
exten = 1557,1,Meetme(905)
Regards
- Bakko
--
We'll get this to you asap
asterisk-users-requ...@lists.digium.com
asterisk-users-requ...@lists.digium.com wrote:
Send asterisk-users mailing list submissions to
asterisk-users@lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
Hi, Complete Asterisk noob here,
I just have a few general questions I need to ask before I start
installing it:
If I want to setup Asterisk simply to respond to echo calls (SIP calls
from a softphone only), do I need to install AsteriskNow as well, or can
I simply configure dialplan to do that?
On Thu, Nov 25, 2010 at 11:54 AM, Gustavo Santos gust...@voip.ufrj.brwrote:
I am studying about echo cancellation in asterisk and I want to use the
numeric information from dahdi_monitor verbose for my research.
Unfortunately, I couldn't find anything about the unit of measurement used
in
On Fri, 26 Nov 2010, Ali Khalfan wrote:
If I want to setup Asterisk simply to respond to echo calls (SIP calls
from a softphone only), do I need to install AsteriskNow as well, or can
I simply configure dialplan to do that?
'echo calls' doesn't mean anything to me. What does it mean to you?
You have provided no details to base suggestions on, so take any
suggestions with a grain of 'salt.'
On Fri, 26 Nov 2010, Edwin Blommaerts wrote:
-The people that setup our server made asterisk write the sound files
onto the hard drive, and then somewhat later store these files into
my-sql.
On 10-11-26 06:00 AM, --[ UxBoD ]-- wrote:
Has anybody had 1.8 crashing for no reason at all ? It has happened a couple
of times so far and when I check /var/log/asterisk/messages nothing is in
there at all :(
Get a backtrace[1] and post the result to the list.
[1]
I think you refer to the echo test that comes with the default
extensions.conf file. Within the regular installation of asterisk on the
extensions.conf file you will have an echo test extension. I don't think you
need asterisk now for that.
On Fri, Nov 26, 2010 at 1:24 PM, Steve Edwards
21 matches
Mail list logo
