2012/6/26, Richard Mudgett :
>> > This is the option I will try.
>> > I'll report my findings here.
>>
>> My findings, after setting layer1_presence=ignore in chan_dahdi.conf
>> are :
>>
>> == Starting D-Channel on span 1
>> == Starting D-Channel on span 2
>> == Primary D-Channel on span 1 up
Dear Warren;
I am thinking what if I need to have a special configuration for a phone,
something other than what the GUI is generating. In other words, what if the
GUI generated a configuration that still I need something else, I feel I have
to be able to put these configurations that I would t
Hello together!
I'm trying to migrate my actual asterisk with adhoc conference bridge
functionality to another server, but I don't get the MusicOnHold
function running in combination with MeetMe on the new server. Beside
the asterisk version (1.6.2.0-1 vs 1.6.2.9-2) the new server is using on
> > This is the option I will try.
> > I'll report my findings here.
>
> My findings, after setting layer1_presence=ignore in chan_dahdi.conf
> are :
>
> == Starting D-Channel on span 1
> == Starting D-Channel on span 2
> == Primary D-Channel on span 1 up
> == Primary D-Channel on span 2
The configuration I did in Cisco Voice GW is listed below;
dial-peer voice 2852 voip
description Incoming Fax Calls to Asterisk
destination-pattern 329..
session protocol sipv2
session target ipv4:192.168.1.69
codec g711ulaw
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
Please ad
On 06/26/2012 10:24 AM, David Cunningham wrote:
Hello,
Does SendFAX have the ability to put the caller ID and timestamp on
the fax?
If so, is there a way to adjust the timezone used for the timestamp?
Thanks for any assistance.
SpanDSP has that ability, including per instance time zones, but
On 06/26/2012 11:47 AM, Roi Stork wrote:
In what way was my question not meaningful? Not enough details?
Enoughj? You didn't give any.
Here's our current receive fax route:
sender fax machine -> telco -> E1 line -> sangoma card -> asterisk
We're currently using free fax for asterisk.
This con
As basically Asterisk 1.8 requires libpri1.4.11 and up, I had to
downgrade Asterisk to 1.6 and libpri to 1.4.10.2 to get "pri show
spans" working back again.
Having a 1.4.13 published with complete PtmP support will be much appreciated.
Regards
--
___
2012/6/22, Olivier :
> 2012/6/21, Richard Mudgett :
>>> My previous message was incomplete.
>>>
>>>
>>> On thing to note is I had to forbid hfcmulti in modprobe.d in the
>>> second box to comply with a warning from dahdi. Without that, I could
>>> see this line in the output of lsmod:
>>> mISDN-cor