Can you confirm Dahdi is loaded correctly
What does the output of dmesg show?
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of PedroTron
Sent: 02 September 2012 04:28 PM
To: Asterisk Users Mailing List -
Anyone having any idea? Can post more details like my config etc. later,
but if someone has an idea now... let me know, thanks!
2012/8/31 Stefan at WPF stefan.at@googlemail.com
Thank you Doug, I tried that, but it doesn't have the expected effect. I
set it to 1 second and restarted, no
Hi,
I have started asterisk using strace, and the log is listed in pastebin
http://pastebin.com/ry2Q1e6x
Moreover, for some peoples Asterisk is properly installed in OpenSuse 12.1
(i586), can you please correct me with the installation steps what I did,
my steps as follows,
1. OpenSuse fresh
2012/9/3 Andrew Colin a...@syrex.cc:
Can you confirm Dahdi is loaded correctly
What does the output of dmesg show?
dmesg output
[ 22.183501] dahdi: Telephony Interface Registered on major 196
[ 22.183504] dahdi: Version: 2.5.1
[ 22.275018] Invalid/unknown operating mode 'COLUMBIA'
Stefan at WPF wrote:
Anyone having any idea? Can post more details like my config etc
With my Asterisk 10 setup, the initial connect may fail and then it does
a retry and succeeds. I also have a 1.4x system setup that does the same.
I guess you can start with the contents of (Please
Doug, which kind of connection exactly are you using? I am using Adaptive
ODBC.
2012/9/3 Doug Lytle supp...@drdos.info
Stefan at WPF wrote:
Anyone having any idea? Can post more details like my config etc
With my Asterisk 10 setup, the initial connect may fail and then it does a
retry and
Hi,
I was testing with newly introduced websocket support in asterisk 11. I
have successfully implemented everything except when i try to make a call i
get no audio. I have tried both SipML5 as well as SIP-JS as clients. the
call get connected but i never hear any audio stream. I however get the
Stefan at WPF wrote:
Doug, which kind of connection exactly are you using? I am using
Adaptive ODBC.
Oh! I forgot you were using that. No, I'm not, sorry!
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty
Doug, if necessary I could change, just tell me, what you use, meaybe the
easiest solution ;-)
2012/9/3 Doug Lytle supp...@drdos.info
Stefan at WPF wrote:
Doug, which kind of connection exactly are you using? I am using Adaptive
ODBC.
Oh! I forgot you were using that. No, I'm not,
Stefan at WPF wrote:
just tell me, what you use, meaybe the easiest solution
UnixODBC
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety.
--
Thanks, but which Asterisk module? (Iam also using UnixODBC by adaptive
odbc)
2012/9/3 Doug Lytle supp...@drdos.info
Stefan at WPF wrote:
just tell me, what you use, meaybe the easiest solution
UnixODBC
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to
PedroTron wrote:
2012/9/3 Andrew Colin a...@syrex.cc:
Can you confirm Dahdi is loaded correctly
What does the output of dmesg show?
dmesg output
[ 22.183501] dahdi: Telephony Interface Registered on major 196
[ 22.183504] dahdi: Version: 2.5.1
[ 22.275018] Invalid/unknown operating
Stefan at WPF wrote:
Thanks, but which Asterisk module? (Iam also using UnixODBC by
adaptive odbc)
func_odbc
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety.
--
Hello,
are there any deb packages for Ubuntu 12.04?
The repos at https://wiki.asterisk.org/wiki/display/AST/Asterisk+Packagesare
for older Ubuntu versions, also Asterisk 10 is only mentioned for YUM
/
CentOS?
Thanks :-)
--
_
--
On 12-09-03 07:46 AM, Stefan at WPF wrote:
Hello,
are there any deb packages for Ubuntu 12.04?
The repos at https://wiki.asterisk.org/wiki/display/AST/Asterisk+Packagesare
for older Ubuntu versions, also Asterisk 10 is only mentioned for YUM
/
CentOS?
I'm working on a set for my personal
After a lot of questions from Asterisk users, I've now created a
dedicated page with settings for Lumicall and Asterisk to work together
http://www.lumicall.org/configuration/asterisk
As of the 1.8.x releases of Lumicall, it is much more consistent at
remaining registered on devices that
Gopalakrishnan
I download and compile from libpri, dahdi, and asterisk. You have to insure
that you have all of the dependencies when you compile there are many. Also
compile and install spandsp as well. I did a 12.1 system over the weekend
without issue.
Thanks
Bryant Zimmerman (ZK Tech
Hello,
In Freepbx 2.10, for instance, you can read several instances of the
following pattern :
In extensions.conf
#include extensions_additional.conf
#include extensions_custom.conf
In extensions_additional.conf
[macro-hangupcall]
include = macro-hangupcall-custom
exten = s,1,Noop(foobar1)
Thanks for everyone's message,
Finally, I figure out how to use AMI fetch data from realtime.
After log in AMI.
First step, a setVar action should be sent
(for example, in this case, I am interested in the content of realtime family =
test_family, key = mykey,)
setVar action should look like
Is it possible to indicate multiple incoming calls from a multi-channel DID
on a single phone? The phone in question is a Polycom 550.
I've googled this with little to no success.
Thanks,
Chris
--
_
-- Bandwidth and Colocation
On Mon, Sep 3, 2012 at 8:25 PM, Chris Nighswonger
cnighswon...@foundations.edu wrote:
Is it possible to indicate multiple incoming calls from a multi-channel
DID on a single phone? The phone in question is a Polycom 550.
I think I may have it, but would like some feedback so I won't chase
has anyone tried asterisk on arm processors?
Yeah, I used Asterisk on ARM Cortex8 processors for an embedded board, Zoom
OMAP35x.
how is the performance?
Well, it was an experimental setup to create a custom Asterisk channel. So
I can't tell you about the performance in production
I have tried it on raspberrypi, Although i didn't do any tests but looks
promising. Should be able to handle calls in figure of two digits easily,
The final answer always depends on your configuration.
Regards,
Qasim
On Tue, Sep 4, 2012 at 8:52 AM, Sazzad sazzadbinka...@gmail.com wrote:
has
23 matches
Mail list logo
