On Thu, 2012-10-18 at 15:45 +, Mahendra Dobariya wrote:
hi,
I want to use asterisk as IVR system ,
but to make and receive GSM call, i want to use 3g usb modem.(voice
enabled)
http://www.huaweidevice.co.in/Products/MobileBroadband/E303c.php
and i want to install this system on two
19.10.2012 08:40, Dmitry Melekhov пишет:
Hello!
I'm trying to use psi+ to conect to asterisk using chan_motif and vise
versa.
Connection looks good, but no sound.
As I see there is some traffic (22.229 is my desktop with psi)
08:38:37.463506 IP 192.168.22.229.8010 192.168.22.19.17012: UDP,
On 10/16/2012 10:24 AM, Jerry Geis wrote:
I am using asterisk 1.4.43.
When I call over the PRI to a single phone and play my recorded
message its heard just fine.
When I call over the PRI to a single extension (the switch then takes
3 phones offhook in intercom mode)
and play my same recorded
Just use the standard dialplan db commands - Read
Set(TESTOP=${DB(Nightop/ext)}) write Set(DB(Nightop/ext)=107). It's not as
robust as Mysql or postgres but does seem to do better than the old Berkley
database.
From: asterisk-users-boun...@lists.digium.com
In general there is no guaarantee as which call will connect; each queue is
independent AFAIK.
l.
2012/10/17 Alex Forster a...@alexforster.com
My company has been running Asterisk 1.6.2.19-1_centos5 from the official
yum repo, and for a while now I've been receiving complaints from our call
I'm setting up a test server with a Digium TE122 and am getting the following
error on the console, spewing as fast as it can. Does anyone have any idea
what this error might be?
[Oct 19 11:24:53] NOTICE[2076]: chan_dahdi.c:3108 my_handle_dchan_exception:
PRI got event: Event 59 (59) on
On Fri, Oct 19, 2012 at 11:28 AM, Eric Wieling ewiel...@nyigc.com wrote:
I'm setting up a test server with a Digium TE122 and am getting the following
error on the console, spewing as fast as it can. Does anyone have any idea
what this error might be?
[Oct 19 11:24:53] NOTICE[2076]:
I have a program that connects to the Asterisk Manager Interface through port 5038 on a remote machine. Suppose I get a TCP disconnection on my program. The program will then attempt to reconnect to the AMI and will eventually succeed. Is there a way to
check whether the disconnection was caused
From AMI you can get uptime. If the uptime is short likely Asterisk restarted.
--
Jim Dickenson
mailto:dicken...@cfmc.com
CfMC
http://www.cfmc.com/
On Oct 19, 2012, at 10:31 AM, Alex Villacís Lasso wrote:
I have a program that connects to the Asterisk Manager Interface through port
5038
On Fri, Oct 19, 2012 at 12:31 PM, Alex Villacís Lasso
a_villa...@palosanto.com wrote:
I have a program that connects to the Asterisk Manager Interface through
port 5038 on a remote machine. Suppose I get a TCP disconnection on my
program. The program will then attempt to reconnect to the AMI
Hi All,
I would like to disable the cdr account logs but in 1.6.0 but the
'accountlogs=no' switch is not available till 1.8 as far as I can
tell. Is the any switch I can turn off int he Mkae file for the
cdr_csv.so module to disable accountcode logs?
Thanks.
JR
--
JR Richardson
Engineering
11 matches
Mail list logo