On 12/13/2012 11:39 PM, Hans Witvliet wrote:
Hi all,
I'm caught up in a struggle between people how can not make up their
mind... Half way implementing a asterisk farm and they come up with
another feature they've seen in kamaillo.
What he showed me was this: three registered sip users,
a) one
I have Asterisk server 1.8.19 with jabber enabled.
On the other side i have openfire server with asterisk-im enabled.
I have a doubt, whether my sip client connected with asterisk can send
message to other sip client, which is connected to same asterisk server.
I have jitsi as a sip client.
Hi
Can someone else please check the following:
We have installed asterisk 1.8.18.0 onto our development and test
servers. They were previously on 1.8.7.0
When an inbound call executes a queue, I can see in the logs that the
hold music is supposed to start playing but there is no sound. If the
Hi all,
I have a doubt. I have to create a queue with 3 phones, these phones can
be reached via two redudant Asterisk server.
I can pass a variable (the sip trunks) to the queue or should I do two
queues with the different trunks?
Danilo
--
--
In my experience, you should set up two identical queues and configurations.
With a little work, you should be able to let server 1 know the phone is in
use by server 2 and vice versa.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
Ok. I solved with this configuration:
into /etc/asterisk/extensions.conf
[queue_from_central]
exten=_ZXXX,1,NoOp( ** Into queue_from_central context ** )
same=
n,Set(peer_up=${IF($[SIPPEER(serverA,status)=OK]?trunk_serverA:trunk_serverB)})
same=
Hi,
I have a B410P card with span ports set up as
span=3,1,0,CCS,AMI
span=4,2,0,CCS,AMI
span=5,3,0,CCS,AMI
signalling = bri_cpe
switchtype = euroisdn
layer1_presence = ignore
However, I keep getting these messages over and over again:
[Dec 14 18:53:14] WARNING[22476]: sig_pri.c:1150
I have a B410P card with span ports set up as
span=3,1,0,CCS,AMI
span=4,2,0,CCS,AMI
span=5,3,0,CCS,AMI
signalling = bri_cpe
switchtype = euroisdn
layer1_presence = ignore
However, I keep getting these messages over and over again:
[Dec 14 18:53:14] WARNING[22476]: sig_pri.c:1150