Hi,
How much CPU utilization will it take when I use G729 transcoding via
hardware based transcoder.
Regards
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introduct
Hello Sean,
Sunday, September 8, 2013, 11:25:24 PM, you wrote:
> The problem is that once a phone has used the server, no other phone can
> use it. The servers sees all the phones as having the same ip address
> (though different ports).
This sounds like the Peer v Friend problem I have had
They are assigned by the router doing the NAT translations.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Sean Darcy
Sent: Monday, September 09, 2013 10:56 AM
To: asterisk-users@lists.digium.com
Subject: Re:
Sean Darcy wrote:
On the server each device has type=friend.
I do notice that peer "home" has the standard iax port 4569. The other
peers are assigned 1026, 1027 and 1028. How are these ports assigned?
The actual configuration entries (minus password) for each one involved
would be useful...
On 09/09/2013 08:04 AM, Julian Beach wrote:
Hello Sean,
Sunday, September 8, 2013, 11:25:24 PM, you wrote:
The problem is that once a phone has used the server, no other phone can
use it. The servers sees all the phones as having the same ip address
(though different ports).
This sounds li
On 09/09/2013 11:08 AM, Joshua Colp wrote:
Sean Darcy wrote:
On the server each device has type=friend.
I do notice that peer "home" has the standard iax port 4569. The other
peers are assigned 1026, 1027 and 1028. How are these ports assigned?
The actual configuration entries (minus passwor
Hi,
I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a web
page to confirm the subscriptions. How can I achieve it? Is Asterisk of
any use to send SMS with the Portech? I really have no idea because I
know nothing about the whole SMS thing...
Thanks,
Niccolò
--
http://www.lin
On 09/09/2013 01:54 PM, Joshua Colp wrote:
Sean Darcy wrote:
home is from the home machine, which registers with the server:
register => home:@
[home]
type=friend
insecure=port,invite
secret= ; same secret as on server
context=incoming
host=
You aren't specifying what username to authentica
Again, that port is assigned by your NAT router. Asterisk cannot control the
source port if the incoming packet. That is set by your NAT router and client
and likely has nothing to do with your problem.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk
Sean Darcy wrote:
home is from the home machine, which registers with the server:
register => home:@
[home]
type=friend
insecure=port,invite
secret= ; same secret as on server
context=incoming
host=
You aren't specifying what username to authenticate as here. Add:
username=home
And give it
>
> Apparently notify.check-sync does work but only if you're NOT using
> the DPMA. I just tried it and the phone just responds with a 200/OK
> and does nothing.
Did you disable enable_check_sync in the xml config?
By default this option is enabled and phones should restart with
check-sync SIP NO
On 09/09/2013 03:37 PM, Eric Wieling wrote:
Again, that port is assigned by your NAT router. Asterisk cannot control the
source port if the incoming packet. That is set by your NAT router and client
and likely has nothing to do with your problem.
-Original Message-
From: asterisk-us
Try this as an example of why it doesn't matter.
1) On windows open a cmd prompt or on linux open up a local terminal.
2) open a web browser and connect to a web site like cnn.com
3) on windows type "netstat -n" in the command prompt, in linux type netstat -n
--ip
For example on my system, the l
On 09-09-13 23:11, Niccolò Belli wrote:
> Hi,
> I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a
> web page to confirm the subscriptions. How can I achieve it? Is
> Asterisk of any use to send SMS with the Portech? I really have no
> idea because I know nothing about the whole SM
14 matches
Mail list logo