Hello;
I am looking for ADSL that supporting VPN so we can connect to it from our
IPhone using the VPN to be able to register at the asterisk PBX. Any
recommended one that is doing fine with voice? Also, does it support bandwidth
priority or shaping for the protocols?
Regards
Bilal--
Hi,
I've set an Asterisk 11 box with a TDM400 board and Dahdi 2.7.0.1.
I've connected an FXS port to an FXO one and issued a couple of channel
originate command to measure the duration Asterisk/Dahdi needs to detect a
dahdi call is coming in.
Basically, using EPOCH variable, I'm reading a 2 or
Darryl Moore wrote:
Thank you Steve, and I read a bit more on the web on this subject
including your own well reasoned page at
http://www.soft-switch.org/patents/index.html
However, despite wide acceptance of the patentability of such codecs
(unfortunately), whether they are in fact software
Hi All
Using Asterisk 11. My dial plan has the following context:
[sip-guest]
exten = _!.,1, Answer
exten = _!.,n, verbose(1,[${EXTEN}@${CONTEXT}])
exten = _!.,n, resetcdr(w)
exten = _!.,n, resetcdr(w)
exten = _!.,n, set(DNIS=${EXTEN})
exten = _!.,n, resetcdr(w)
exten = _!.,n,
Hello,
I've got a test setup with 2 asterisk boxes:
Asterisk1 with:
asterisk 11.5.1
dahdi 2.7.0.1
Digium TDM400 with 2 FXO ports
Asterisk2 with:
asterisk 11.5.1
dahdi 2.7.0
Digium TDM400 with 2 FXS ports
Asterisk1 has the following AEL Dialplan:
context remote {
s = {
Answer();
We have been using Asterisk SLA for a while with Cisco SPA series phones. Once
in a while the phones flash, but not ring when a call comes in. We can pick it
up and talk to the caller even if that's the case.
This is pretty random (might not happen for couple of weeks). The quick
solution is
After posting her, I've found this thread
http://forums.asterisk.org/viewtopic.php?f=1t=83088
In it I read:
The normal PSTN behaviour is calling party clearing, with a timeout of 2
to 6 minutes if the called party is the only one that clears.
Can someone explain a bit further why calling party
Have you tried restarting the phone instead of Asterisk? I don't think that Asterisk sends
separate commands to the bell and to the call LED. Since the LED is flashing, it is likely that
the SIP INVITE signal from Asterisk is ok. Also the ring tone normally does not come from
Asterisk itself.
Hi,
I have released AppKonference 2.4 today.
This release includes a frame cache for asterisk frames which should be more
efficient than the asterisk frame cache is for this type of application. It's
ulaw/alaw only for now.
This release also added a speaker list which the conference thread
Hi
I use asterisk with Realtime/Mysql.
I have put a Call-limit at 1, but if the SIP account receive two call in
same time,
the second call don't ring busy.
Ayone know a solution for the second call get a busy ring ?
Best Regards
Jerome
--
To answer my question, set unanswered=yes in cdr.conf
Source:
http://lists.digium.com/pipermail/asterisk-users/2009-December/241749.ht
ml
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Murthy
If you are looking for software i would go for pfsense.
if your are looking for hardware, i would go for mikrotik.
Hello;
I am looking for ADSL that supporting VPN so we can connect to it from
our IPhone using the VPN to be able to register at the asterisk PBX.
Any recommended one that is
Have you tried restarting the phone instead of Asterisk? I don't think that
Asterisk sends
separate commands to the bell and to the call LED. Since the LED is flashing,
it is likely that
the SIP INVITE signal from Asterisk is ok. Also the ring tone normally does
not come from
Hi
a new small question ;=)
We have two Asterisk, connected in IAX2.
On the first, in dialplan, we have:
exten = _XX.,1,Set(IAXVAR(ACCOUNTID)=${CDR(accountcode)})
we sent into the IAXVAR ACCOUNTID the accountcode.
On the second, in dialplan, we have:
exten =
Wont this work?
exten =
18,1,Set(CDR(accountcode)=${IAXVAR(ACCOUNTID)})
accountcode is not
read-only property so it should be writeable.
Phibee Network Operation
Center писал 07.10.2013 21:05:
Hi
a new small question
;=)
We have two Asterisk, connected in IAX2.
On the first,
I thunk so
Let me see
-Original Message-
From: Mikhail Lischuk mlisc...@itx.com.ua
Sender: asterisk-users-bounces@lists.digium.comDate: Tue, 08 Oct 2013 01:08:22
To: Asterisk Users Mailing List - Non-Commercial
Discussionasterisk-users@lists.digium.com
Reply-To: Asterisk Users Mailing
16 matches
Mail list logo