Re: [asterisk-users] How to Busy signals on DAHDI

2014-02-04 Thread Olivier
2014-02-04 Richard Mudgett : > > > > On Tue, Feb 4, 2014 at 10:56 AM, Olivier wrote: > >> Hello, >> >> On a Asterisk 1.6.1 powered system, I've just discovered that using >> Busy() application in dialplan was no enough to send a Busy signal on >> incoming Dahdi channel. >> >> On this specific ins

[asterisk-users] Voice XML Asterisk Integration

2014-02-04 Thread Gopalakrishnan N
Which is the best way around to integrate Asterisk with VoiceXML like VoiceGlue...! Am using Asterisk 11.2.1. Regards. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live

Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

2014-02-04 Thread Shaun Ruffell
On Wed, Feb 05, 2014 at 03:03:33AM +0530, akhilesh chand wrote: > I had just upgrade the dahdi drivers. > > > *[root@XX ~]# dahdi_scan*[1] > active=yes > alarms=OK > description=Wildcard TE131/TE133 Card 0 > name=WCT13x/0 > manufacturer=Digium > devicetype=Wildcard TE131/TE133 (VPMOCT032) > locat

Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

2014-02-04 Thread akhilesh chand
I had just upgrade the dahdi drivers. *[root@XX ~]# dahdi_scan*[1] active=yes alarms=OK description=Wildcard TE131/TE133 Card 0 name=WCT13x/0 manufacturer=Digium devicetype=Wildcard TE131/TE133 (VPMOCT032) location=PCI Bus 01 Slot 01 basechan=1 totchans=31 irq=0 type=digital-E1 syncsrc=1 lbo=0 db

Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

2014-02-04 Thread Shaun Ruffell
On Wed, Feb 05, 2014 at 02:46:34AM +0530, akhilesh chand wrote: > Dear Folks, > > whenever I'm executing following command : > > dahdi_cfg -vvv > > I got following error: > > > DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Do you have any dahdi devices loaded? What is the

[asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

2014-02-04 Thread akhilesh chand
Dear Folks, whenever I'm executing following command : dahdi_cfg -vvv I got following error: DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Regards akhilesh -- _ -- Bandwidth and Colocation Provided by http

Re: [asterisk-users] Connect to remote GW

2014-02-04 Thread Mitul Limbani
Make two trunk entries in sip.conf for both IPs and do the failover routing in extensions.conf Mitul On Wednesday, February 5, 2014, Meadows Hoa wrote: > If SIP channel driver needs to connect to a remote GW over a dedicated SIP > trunk BUT the remote GW has a 'standby' in case of failure, how

[asterisk-users] Connect to remote GW

2014-02-04 Thread Meadows Hoa
If SIP channel driver needs to connect to a remote GW over a dedicated SIP trunk BUT the remote GW has a 'standby' in case of failure, how can the sip configuration file be configured for the remote GW when there are actually two IP addresses. If the main remote GW fails control automatically sw

Re: [asterisk-users] auto-answer call

2014-02-04 Thread Steve Edwards
On Tue, 4 Feb 2014, Salaheddine Elharit wrote: i have asterisk 1.4.43 installed and i want to configure the auto-answer exten => 506,1,SIPAddHeader("Call-Info:\; answer-after=0") I'm just a 1.2 Luddite... I have this for a Sipura: exten = _!.,n,sipaddheader(Call-Info:\;answer-after=

Re: [asterisk-users] How to Busy signals on DAHDI

2014-02-04 Thread Richard Mudgett
On Tue, Feb 4, 2014 at 10:56 AM, Olivier wrote: > Hello, > > On a Asterisk 1.6.1 powered system, I've just discovered that using > Busy() application in dialplan was no enough to send a Busy signal on > incoming Dahdi channel. > > On this specific install, adding an Answer()) and a Playtone() sta

[asterisk-users] How to Busy signals on DAHDI

2014-02-04 Thread Olivier
Hello, On a Asterisk 1.6.1 powered system, I've just discovered that using Busy() application in dialplan was no enough to send a Busy signal on incoming Dahdi channel. On this specific install, adding an Answer()) and a Playtone() statement in dialplan triggered sending of busy tone but I'm sti

Re: [asterisk-users] Best approach in asterisk configuration

2014-02-04 Thread Michel Verbraak
op 04-02-14 09:29, sylvain Gotri schreef: > Hi , > I have asterisk 1.8.5 installed on Centos 6. Now I want to configure > my PBX to work in my network. I see that I can do this with asterisk > files or use database like mysql to do it (realtime) > I want to know what is the best way and what can be

[asterisk-users] auto-answer call

2014-02-04 Thread Salaheddine Elharit
hello list, i have asterisk 1.4.43 installed and i want to configure the auto-answer exten => 506,1,SIPAddHeader("Call-Info:\; answer-after=0") exten => 506,n,Dial(SIP/105) when i call the 506 the SIP/105 still ringing, i have snom 320 and i have set the Auto Answer Indication: on i test with

Re: [asterisk-users] Best approach in asterisk configuration

2014-02-04 Thread Nyamul Hassan
You could go with a GUI type interface... like FreePBX or Elastix. Regards HASSAN On Tue, Feb 4, 2014 at 2:29 PM, sylvain Gotri wrote: > Hi , > I have asterisk 1.8.5 installed on Centos 6. Now I want to configure my > PBX to work in my network. I see that I can do this with asterisk files or >

[asterisk-users] Best approach in asterisk configuration

2014-02-04 Thread sylvain Gotri
Hi , I have asterisk 1.8.5 installed on Centos 6. Now I want to configure my PBX to work in my network. I see that I can do this with asterisk files or use database like mysql to do it (realtime) I want to know what is the best way and what can be consequence when I choose other way ? Thanks.