[asterisk-users] Asterisk Tech/Eng Positions Open In Dallas TX

We have a couple of positions open, please contact me off-list if interested. http://www.ntegratedsolutions.com/voice-engineer-dallas/ These are full time positions in Dallas, no telecommuters please. Thanks. JR -- JR Richardson Engineering for the Masses Chasing the Azeotrope -- ___

[asterisk-users] outgoing calls not working on sangoma A200

Hi. I have 3 lines connected to a SangomaA200. All was working normally, but 3 days ago we experiment this issue.The outside callers can call us normally; but when we try to do an external call, just receive the message "all circuits are busy". Only happen with outgoing call. Incomming cal

Re: [asterisk-users] Run script action when Dahdi phone goes off-hook?

On 19/06/2015 20:45, Richard Mudgett wrote: On Fri, Jun 19, 2015 at 2:14 PM, asterisk > wrote: -- Starting simple switch on 'DAHDI/x-y' Can I run a script (either in extensions.conf, or ael, or whatever) when that is detected? If so, I wil

Re: [asterisk-users] Run script action when Dahdi phone goes off-hook?

On Fri, Jun 19, 2015 at 2:14 PM, asterisk wrote: > > Hi, > > Long story short - I have an ancient Britsh Telecom phone attached to my > Asterisk PBX via Dahdi. It works beautifully, receiving calls, and the call > quality is excellent. However, dialling out is impossible, as Asterisk > consistent

Re: [asterisk-users] Calling multiple phones at once

Hi again! Also, given my setup below, how do I send caller id to my cell? SIP/83@callcentric is my cell, when I get incoming call when someone dials into Asterisk - I just see public calcentric’s DID number. I want to send a number of who CALLED IN into the Asterisk and possibly add couple numb

Re: [asterisk-users] Calling multiple phones at once

Hello All! I asked week a so ago about how to call multiple phones alltogether (home, office, cell) Dial app looks simple, this is kind of what I have now: - [globals] IVAN_HOME_OFFICE=SIP/BF8 IVAN_OFFICE=SIP/CFC IVAN_CELL=SIP/83@callcentric [internal] exten => 101,1,Dial(${

[asterisk-users] Run script action when Dahdi phone goes off-hook?

Hi, Long story short - I have an ancient Britsh Telecom phone attached to my Asterisk PBX via Dahdi. It works beautifully, receiving calls, and the call quality is excellent. However, dialling out is impossible, as Asterisk consistently mis-reads the number of pulses the dial sends (it could

Re: [asterisk-users] error trying to get PJSIP working

On Thu, Jun 18, 2015 at 1:52 PM, Ryan, Travis wrote: > I’m doing an upgrade from Asterisk 11 to 13. I’m following the guide at > https://wiki.asterisk.org/wiki/display/ast/setting+up+PJSIP+REaltime to > setup realtime, as I use realtime on Asterisk 11 too. > > > > I’m getting the following error w

Re: [asterisk-users] setting outbound caller ID

On Thursday 18 Jun 2015, Greg Woods wrote: > I have found several places where it is explained how to do this, and I > have got the following setup, but it is not working (the provider claims > they are not getting a proper caller ID setting from me). > > I have a number of extensions that are sho