>Daniel,
> we have the same problem when our PRI line drops and Zapras has to
>reconnect. You will also notice that the pppd process does not die
>when Zapras does and the ppp connection cannot re-establish itself.
>What we normally do is restart asterisk and then kill the pppd process
>with the
I'm trying to use ZapRAS to enable ppp connection through my E1.
After the ZapRAS command is executed, all sound is crappy on all lines!
The only solution is to reboot the machine (or halt it, and then power
it on since Digium's hardware doesn't like reboots).
Anyone know how this can happen?!
I
After a big help from Peter Svensson, I got ISDN Data-calls up and
running.
But now when everything seems connected, pppd has been authorized by
other peer and even got an IP address, the whole connection seems to
stop working.
Very unregulary, the PPPD's EchoReq's stop being answered, and of co
It seems like when I use PPPD-command, or ZapRAS, Asterisk doesn't make
it a "data" call, but a regular voice-call.
My ISP change their behaivour depending on the incoming call-type (data
or voice).
If it's voice, they try to open up a V.90 connection. Else (data call)
it will reply with PPP dir
Hi!
I've been trying to get ZapRAS or PPPD to work. Neither does!
All i get is LCP: timeout sending Config-Requests
But after trying, all voicelines get crazy! It sounds like robots when
somebody calls!
And since the zaptel drivers can't unload (the server hangs totaly if I
try!), I have to re
Hi!
I'm using FastAGI (agi://) to make some calls. To do the dialing i use "EXEC
DIAL Zap/g1/...".
But how can I make "answer supervision" with FastAGI? DIAL command won't return
until call is finished.
Thanks in advance!
--
Daniel
___
Asterisk-
Hi!
To me, it seems like Asterisk are involved in alternating the sound/voice
running through it.
One thing is that it mutes DTMF digits.
I also got an Adit 600 channel bank connected via MGCP, which _might_ have
something to do with it,
but I can't find any settings in it, regarding DTMF mutes.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It seems like Asterisk are having problems detecting DTMF digits when
using an Adit 600 channel bank via MGCP.
I've tried to turn on RFC 2833 on both Adit and Asterisk, but no
digits at all are working then.
Anyone experienced simular with Adit or other
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
ChanIsAvail does not work with MGCP channels, as said in the wiki.
But other applications works simular, like Queue and Dial.
What's really the problem with ChanIsAvail?
Is it possible to use Queue and Dial to make a working ChanIsAvail?
I will take a b
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
administrator tootai wrote:
| Daniel Nyström a écrit :
|
|> My server is located in Sweden. And as many European countries,
|> we use a 0 to indicate area codes, and 00 to indicate
|> international calls. And, when not having any leading 0,
My server is located in Sweden. And as many European countries, we use a 0 to
indicate area codes, and 00 to indicate international calls.
And, when not having any leading 0, the call is a local call.
But when dialing out through Asterisk, I can't use leading zeros! I havn't
tried international c
Do anyone have experience with echo cancelling on Adit 600?
My Adit 600 consist of 5*8 FXS cards and 1 CMG Router using MGCP to Asterisk.
I've turned on Echo Cancelling with 64ms as longest delay (that's maximum).
But there still are great echo with delay when dialing through the telco
(through an
Is it possible to make Asterisk to execute a task when a called party answeres?
Does the MGCP protocol include support for notificate when a call is answered?
I have one Adit 600 w/ 40 FXS lines. When a call is initiated from such line to
the
PSTN through our E1 EuroISDN, I would like the Adit to
rsal.
Is there other standards how to indicate to the caller that the callee has
answered the call? How does it work in other countries?
Thanks!
--
Daniel Nyström
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It seems like the Radio discussions is closing in on something I was
interested in.
How about controlling 30 2-way radios via E1 and 30-channel "Mux"
(channel bank?) with E&M signalling?
I think the Mux uses CAS and each channel has Audio out, PTT, Audi
A little off-topic maybe, but it's still for the Adit used with Asterisk. ;)
I wonder where I can buy 50 pin Amphenol cables, with connector on one side,
and open cables on the other for mounting in our own patch panels.
In Europe, or Sweden preferably.
It's said to be very common on telcos, but
I've finally got my Adit 600 and are configuring it right now.
But I have to say, there aren't much documentation for it.
I've setup MGCP and Asterisk seems to find it.
But all channels (40 FXS channels) are "Down"!
But the MGCP itself is "Up" according to the statistics.
I can't find any documents
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Have anyone tried using this?
I've looked at app_rpt, and that's a nice project, but have anyone
tried using Asterisk for radio services using a Mux e.g.? I was
thinking of using an E&M Mux (or channel bank i think) with
TX/RX/BUSY/PTT functionality.
Or
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
What's exactly Euro-ISDN? Is it G.931? I don't really get this.
Is there a Q/G/E document for Euro-ISDN?
I've downloaded two out of three fron ITU, so I would like to know for
sure! :)
Thanks!
Peter Svensson wrote:
| On Tue, 15 Feb 2005,
Where can I get E1 and/or Euro-ISDN specifications/data sheets?
Are there specs for other E./G./Q./etc. protocols as well?
Thanks!
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Are this currently working with CVS-HEAD?
I've got an X100P-clone, and I've patched the zaptel drivers.
But the Asterisk patches seems to be there.
But I can't make it receive Caller-ID!
Btw, by doing a cvs checkout asterisk, the HEAD-version will be
do
Hi! Is it possible to handle incoming calls with different contexts pending on
the callerid ?
E.g. like you are able to define different contexts on each Zap-channel.
Thanks!
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.d
I've just ordered an Adit 600 w/ 5xFXS cards and one CMG cards.
As of my discussion with CarrierAccess, it seems to work great.
I've also begun an configuration (mgcp.conf) until it arrives, and also there
it seems to have great capabilities.
There are alot of data sheets and information of all A
As long as the bootloader exists on both disks, and boot order are including
both disks, there aren't any problems even booting with a failured disk.
But since SATA is (often) Hot Plug, you could change the failed disk while
running.
- Original Message -
From: "Mark Eissler" <[EMAIL PRO
Is it possible to make the telco send an busy signal when an incoming call are
supposed to dial a group which has all lines busy?
Since I will get many public phonenumbers into my E1 (from telco), it will be
sliced up into a few groups. There might be channels availible in the E1, but
not on the
Is it possible to turn off DTMF recognition (and all transfer services etc.)
pending on CallerID (or FXS channel)?
Some of the FXS channels I will setup soon, is going to work exactly like POTS.
It will be used by people not knowing their within Asterisk.
They will be pretty confused when "Transfe
Are there much performance differences when using XEON or not?
In my case, I will go with muLaw both in and out of Asterisk. Are there really
any processing at all if it's using same codec all the way?
___
Asterisk-Users mailing list
Asterisk-Users@list
---
From: "Leo Ann Boon" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Sent: Saturday, January 22, 2005 6:13 AM
Subject: Re: [Asterisk-Users] Some more hardware and E1 questions
>
>
> Daniel Nyström wrote:
>
> >H
y, January 21, 2005 2:42 PM
Subject: Re: [Asterisk-Users] Adit 600 as VoIP router (MGCP) and Asterisk
> On Fri, 21 Jan 2005, Daniel Nyström wrote:
>
> > Do you think it's hearable? All communication will be on a dedicated
> > Fast Ethernet link (just a cross-over cable).
cial Discussion"
Sent: Friday, January 21, 2005 11:50 AM
Subject: Re: [Asterisk-Users] Adit 600 as VoIP router (MGCP) and Asterisk
> On Fri, 21 Jan 2005, Daniel Nyström wrote:
>
> > Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router
> > using MGC
mercial Discussion"
Sent: Friday, January 21, 2005 10:36 AM
Subject: Re: [Asterisk-Users] Adit 600 as VoIP router (MGCP) and Asterisk
> On Fri, 2005-01-21 at 09:06 +0100, Daniel Nyström wrote:
> > Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP
> > router u
Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router
using MGCP IP protocol, instead of controlling it through an E1.
Have anyone tried this configuration? How does MGCP works? I've tried to search
for it on Google, but I only find the protocol specification for it.
Is Aster
problably
ian't?
If anyone's using Adit 600, did they send all cables required for connecting to
the FXS channels? Seems like a very unique "plug" on the side of Adit.
Thanks!
BR
Daniel Nyström
___
Asterisk-Users mailing l
Their server seems to be down though...
- Original Message -
From: "Wilson Pickett" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial
Discussion"
Sent: Wednesday, January 19, 2005 3:26 PM
Subject: Re: [Asterisk-Users] Resellers in Europe
> > I'
Do anyone knows abount European resellers of these products:
* Digium Wildcard TE410P
* CarrierAccess Adit 600
Preferably in Sweden, but Europe is also better.
Have anyone within EU ordered products from these companies directly from the
US?
In that case, how is the service and delivery?
Than
cards?
Thanks!
- Original Message -
From: "Peter Svensson" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Sent: Tuesday, January 18, 2005 3:10 PM
Subject: Re: [Asterisk-Users] Prefered server hardware
> On Tue, 18 Jan 2005,
emens systems? Or other
"complete server" systems?
Thanks!
BR
Daniel Nyström
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options
30 handsets. Is it FXS or FXO modules I
need? As I've seen, there is alot of misunderstanding in that particulary case.
BR
Daniel Nyström
- Original Message -
From: "Steven Critchfield" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial
According to CarrierAccess, the Adit 600 uses CAS for voice signalling. What is
this?
This should not be a problem for Asterisk?
Does the Asterisk server need to reencode CAS into aLaw when going to Euro ISDN?
BR
Daniel Nyström
___
Asterisk-Users
Do anyone have experiences with Euro ISDN in Sweden?
Does CallerID work properly? Both in and out.
Do anyone know of a reseller for Digium cards and/or CarrierAccess Adit 600 in
Sweden or Europe (EU)?
Thanks!
BR
Daniel Nyström
___
Asterisk-Users
Is it still possible to acheive all features in Asterisk, like having Digium
cards for all channels?
I'm looking at an Adit 600 with four 8-ch FXS service cards. Is that to prefer?
BR
Daniel
- Original Message -
From: "Jim Van Meggelen" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing Li
?
BR
Daniel Nyström
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
was dialed?
Let's say line 1-4 are for the static numbers, and 5-30 for the other 1000
numbers.
Are there any documentation with this issue?
Best Regards
Daniel Nyström
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.dig
h individual accounts and
numbers). That's why we need analog interface from Asterisk to our
exchanger.
Is this possible with Asterisk?
Hope this wasn't too confusing. Just let me know if there are anything
unclear, and I will try to explain it in a better way.
Happy new y
44 matches
Mail list logo