Anybody have a recommended provider which supports TLS for SIP trunk
communications, or even encryption via IAX?
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introd
I haven't had similiar experience, but in several threads about sound
quality people have talked about Network cards being the culprit. In
particular, a few people have commented all sorts of problems on
onboard NIC's, since they tend to be of lesser quality than
stand-alone NICS.
On 8/26/05, Adam
If you can get your POTS lines terminated in T1 lines, thats probably
best. Then you can get a digium Quad Card. Otherwise, if you're going
to terminate more than 8 lines, you should probably use a channel
bank.
On 8/25/05, Gulzar Hussain <[EMAIL PROTECTED]> wrote:
> Hi All
>
> I want to terminat
Couldn't you already integrate Asterisk and GoogleTalk with this?
http://www.jivesoftware.org/index.jsp since GoogleTalk just uses XMPP?
On 8/24/05, Andreas Bayer <[EMAIL PROTECTED]> wrote:
> Am Mittwoch, 24. August 2005 10:32 schrieb Mat Stace, Colewood Internet:
> > Lifted from the developer pag
That username & password combination is referenced elsewhere for
different models of ATA's as well. I believe it is somewhat a Vonage
standard.
On 8/23/05, Steve Gladden <[EMAIL PROTECTED]> wrote:
> > There is a fee, but I believe you can call Vonage and get a box
> > unlocked after you are done w
There is a fee, but I believe you can call Vonage and get a box
unlocked after you are done with the service. If I'm remembering
right, the fee is about $10.
BTW, per http://forum.openwrt.org/viewtopic.php?id=1643
try
user: user
pw: tivonpw
For the web interface. You might be able to unlock it f
If you don't mind sharing, what was the vendor that worked great? Thanks!
On 8/17/05, VoIP Newbie <[EMAIL PROTECTED]> wrote:
> I bought 3 from 3 different vendors. One of them has echo issue.
> Another one has an issue regarding PCI master abort. Only one really
> works fine for me. These 3 cards
Yes, but your results may vary. Apparently some people have problems
with "clone" cards (aka regular modems), dropping calls, and having
echos. (Then again some people have reported no problems at all).
E-bay is a good source for these. You can also check out this list
with more information about A
I ran into this on the net today, and thought it could have some
interesting implications for Asterisks/Vonage integration. It seems
integrating this with Vonage/Asterisks server could allow you to have
Vonage call you, give you a dial-tone, and call out a different line.
(Or other such uses). I th
With 120 Pots lines, why not get 5 T1's, then pick up a couple Digium
cards (A Quad T1, and a single T1 card).
On 8/9/05, Edwin Lam <[EMAIL PROTECTED]> wrote:
> hi folks.
>
> i'm planning to connect * to 120 POTS line. i've done some research
> on FXO cards but unfortunately most manufacturers on
Now that the X100P is no longer being offered by Digium, what is the
best solution? I seem to have run into a few posts where people talk
about problems they've had with their X100P clone cards (dropping
calls, echos, etc) other people seem to not have any problems.
Of the three chipsets that will
You might have better luck posting this question on Asterisk-Dev (on
how to disable checksum etc).
On 8/5/05, Jon Whitear <[EMAIL PROTECTED]> wrote:
>
> >Hi,
> >
> >I'm running Asterisk 1.0.8 on Gentoo, with an X100P (clone) card, and I'm
> >having problems with Caller ID. I have run clidtest, an
12 matches
Mail list logo