# termtype: unknown
bchan=1-23
dchan=24
echocanceller=mg2,1-23
/etc/asterisk/chan_dahdi
[channels]
language=en
context=Incoming-Pri
switchtype=dms100
signalling=pri_cpe
group=1
channel = 1-23
Thanks,
Eric Merkel
--
_
-- Bandwidth
On Tue, Aug 16, 2011 at 10:48 AM, Shaun Ruffell sruff...@digium.com wrote:
On Tue, Aug 16, 2011 at 10:31:54AM -0400, Eric Merkel wrote:
I am having a problem with a new PRI turn-up on dahdi 2.5.0 and
asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS,
ESF and the span shows
looking at an AudioCodes MP114 FXO or possibly two Sangoma U100's but
don't have experience with either.
=
Eric Merkel
ejmerkel.li...@gmail.com
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com
I am looking at using for a Xorcom channel bank to provide some FXO FXS
ports. Can anyone tell me how well they work with asterisk and your
good/bad experiences with their products?
Also, how well do they work with faxes and modems?
Thanks!
--
=
Eric Merkel
ejmerkel.li...@gmail.com
libpri
compiled without any issues prior to compiling asterisk. What would cause
the pri debug commands to not be available in the CLI?
=
Eric Merkel
ejmerkel.li...@gmail.com
--
_
-- Bandwidth and Colocation Provided
chan_dahdi.so from the command line showed me the problem.
Thanks again!
=
Eric Merkel
ejmerkel.li...@gmail.com
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Anthony
Francis - Handy Networks LLC
Sent: 2010-01-21 15:50
On 11/4/07, Nick Brown [EMAIL PROTECTED] wrote:
Morning All,
Quick question that has me stumped. Have a queue with several members
(Statically defined in queues.conf at this stage for testing) who use Cisco
7960's.
The queue is configured to use rrmemory and generally this works correctly.
I would guess from the error message that you have the filename of the
firmware mispelled in the OS79XX.txt file or it's not in your tftp
directory. It could also be bad permissions on the file.
-Eric
On 5/17/06, Ben Blakely [EMAIL PROTECTED] wrote:
Hello All,
I just picked up 10 new
the PAP2 version was
available which is the Vonage branded version. :(
I saw someone on the list say that they heard from Cisco that these units
were not due out until Dec. Did Cisco/Linksys pull these units off the
shelves?
--
Eric Merkel
MetaLINK Technologies, Inc
a definitive answer.
Also, if anyone has dealt with this setup before and would be willing to
share an example config (cisco *), that would be much appreciated!
Thanks.
--
Eric Merkel
MetaLINK Technologies, Inc.
___
Asterisk-Users mailing list
[EMAIL
10 matches
Mail list logo