Hi,
I need some basic help to get going. I have done the following in
extensions.conf on * machine #1 to use mwanalyze for incoming calls:
--snip--
; Mwanalyze
exten => 31,1,Answer
exten => 31,2,Mwanalyze(8|8000|10|328)
exten => 31,3,NoOp(${mwa_ampitude})
exten => 31,4,NoOp(${mwa_ripple})
exten => 31,5,NoOp(${mwa_bad_timeslices})
--snip--
On * machine #2, I've put the following file in
/var/spool/asterisk/outgoing with filename 2026.ext.31.call
--snip--
channel: SIP/31@<machine name>
maxretries: 3
retrytime: 60
waittime: 60
callerid: "foo" <123>
application: Milliwatt
data:
--snip--
But that doesn't work--mwanalyze never hangs up the call to report the
channel variables. The call stays up until I do a soft hangup, at which
time channel variables are not reported. I can call into machine #1 on
extension 31 from a SIP phone and mwanalyze will play a tone for 10
seconds, populate channel variables, and exit as I would expect. Can you
help me understand why Mwanalyze doesn't hang up the call after the
configured amount of time when I call between * machines by putting the
above file in the outgoing directory?
If you're not sure how to answer the question above, then this one might be
easier to answer: how do you expect * to be configured to use Mwanalyze?
Thanks in advance,
Evan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
