[Asterisk-Users] 7960 SIP image

2005-01-22 Thread Gonzalo Gasca Meza
Hi, If you still are in the Skinny image Settings --- Network config in that menu press **# and you will get the phone unlock. Otherwise, if you are in SIP you need to do the following: Once the telephone has booted -- Settings -- 9 Unlock config --- Enter password The default password is cisco

[Asterisk-Users] Cisco 7940G

2005-01-18 Thread Gonzalo Gasca Meza
I got similar issues, Im running P0S3-07-2-00 loadInyour tftpboot folder in your TFTP server make sure you have these files: CTLSEP000D651CF3FB.tlvSEP000D651CF3FB.cnf.xml SIP000D651CF3FB.cnf [EMAIL PROTECTED] tftpboot]# cat CTLSEP000D651CF3FB.tlvP0S3-07-2-00[EMAIL PROTECTED] tftpboot]# cat

[Asterisk-Users] 2nd try Mediatrix 1204

2005-01-17 Thread Gonzalo Gasca Meza
Hi everybody, I have setup a Mediatrix 1204, the calls worked fine, both incoming and outgoing. The problem here is the delay. When I do a call to the PSTN or receive a call from the PSTN exists a delay of 4 seconds after answer or sending the call. For OUTGOING My Dialplan for the Mediatrix box

[Asterisk-Users] R2/MFC Mexico FREE calls to test chan_unicall

2005-01-13 Thread Gonzalo Gasca Meza
Miguel, Congrats, i was testing your R2/MFC link, and I was able to made lots of calls, all of them worked fine.Thanks for setting up this link. When i hang up, there were no dead air, music on hold worked fine, when I called to a conference worked fine also, busy line Telmex recording worked

[Asterisk-Users] Mediatrix 1204 DialPlan and Delay

2004-12-28 Thread Gonzalo Gasca Meza
Hi everybody, I have setup a Mediatrix 1204, the calls worked fine, both incoming and outgoing. The problem here is the delay. When I do a call to the PSTN or receive a call from the PSTN exists a delay of 4 seconds after answer or sending the call. For OUTGOING My Dialplan for the Mediatrix box

Re: [Asterisk-Users] Callmanager 4.1 and Asterisk

2004-12-28 Thread Gonzalo Gasca Meza
You need to create a SIP trunk in CCM and in Asterisk a peer in sip.conf with the IP address of the CCM (trunk) In the trunk configuration change the transport to UDP. Enter the IP of Asterisk. And create a route pattern with gateway the SIP trunk In Asterisk in extensions.conf create the route

[Asterisk-Users] Free World Dialup and Asterisk

2004-12-19 Thread Gonzalo Gasca Meza
Hi, Julio, thanks for the tip, IAX and the incoming calls confi did the trick! FWD is up and running! THANKS! and happy holidays! Do you Yahoo!? Yahoo! Mail - now with 250MB free storage. Learn more.___ Asterisk-Users mailing list

[Asterisk-Users] Free World Dialup and Asterisk

2004-12-18 Thread Gonzalo Gasca Meza
Hi forum, I have been fighting days and days configuring FWD and asterisk with NO success I have the following scenario. My sister in Spain with FWD dialup client My question is if she can dial my FWD dialup number, which is registered in Asterisk and the call being forwarded to ring my IP

[Asterisk-Users] SIP endpoints ---- RTP stream

2004-12-07 Thread Gonzalo Gasca Meza
Hi all, I have just setup Asterisk, but the problem is that all RTP stream pass through Asterisk, I mean all call setup and voice stream pass trough Asterisk once the call is established. Is there a way thatcall setup is established, the RTP stream pass just between the SIP endpoints. Example:

[Asterisk-Users] MGCP Gateway

2004-12-06 Thread Gonzalo Gasca Meza
Any example for configuring T1 PRI with Asterisk using a Cisco 2600 series router? MGCP config? Do you Yahoo!? All your favorites on one personal page – Try My Yahoo!___ Asterisk-Users mailing list [EMAIL PROTECTED]

[Asterisk-Users] RE: Cisco Unity and Asterisk

2004-11-09 Thread Gonzalo Gasca Meza
Yes seems to be no reason for using Unity instead of * VM apart that Unity is windows based. is just to test SIP protocol between them = __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[Asterisk-Users] Cisco Unity and Asterisk

2004-11-08 Thread Gonzalo Gasca Meza
Hi group Anyone has perform Unity SIP integration with Asterisk PBX? Thanks! Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Cisco Unity + Asterisk

2004-11-07 Thread Gonzalo Gasca Meza
Hi group! Anybody has implement Cisco Unity Voice Mail with Asterisk. I read the Unity can do SIP integrations Thanks! Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com___ Asterisk-Users mailing list [EMAIL PROTECTED]

Re: [Asterisk-Users] Cisco 7970 Firmware for the 7960G

2004-11-07 Thread Gonzalo Gasca Meza
Hi Michael, There are not newsthat 7970 support SIP yet, actually the most recent news from 7970´s are that they will have GigaEthernet ports. I will email the latest SIP image tomorrow. Thanks!__Do You Yahoo!?Tired of spam? Yahoo! Mail has the

[Asterisk-Users] DIAL tone

2004-09-26 Thread Gonzalo Gasca Meza
Hey group! Could someone could help me configure a DIal plan in order that when i dial 9 at the beginning i receive DIAL TONE? Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone.___ Asterisk-Users mailing list [EMAIL PROTECTED]

[Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual

2004-09-04 Thread Gonzalo Gasca Meza
Here is my configuration for MEdiatrix 1204, by default the 1204 strips one digit, so it is not necessary to use: To dial OUTSIDE EXTENSIONS.CONF [locales];ignorepat = 9 exten = _9,1,Dial(SIP/[EMAIL PROTECTED])exten = _9,2,Congestionexten = _9,102,Congestion To receive

[Asterisk-Users] PoE injectors

2004-08-20 Thread Gonzalo Gasca Meza
Anyone knows some home-use PoE injector that works ok with Cisco 7960s? Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish.

Re: [Asterisk-Users] 7960 help

2004-08-14 Thread Gonzalo Gasca Meza
hi man, if you are trying to upgrade to the latest version, change the permissions of the file, then to the SIPmacaddress.cnf file add a line that says image version = version, copy that line from the Sipdefault.cnf file, . If the first workaround does not work, try to downgrade to version 2.3

Re: [Asterisk-Users] Cisco MC3810

2004-08-03 Thread Gonzalo Gasca Meza
give me a call tomorrow i could help you with your issue 52(55) 150054 54 GonzaloWayde Nie [EMAIL PROTECTED] wrote: Wayde Nie wrote: I can get a Cisco MC3810 with a mixture of FXO and FXS ports, the MC3810 comes with a built in Ethernet port and I believe it does SIP too... Will this mean that I

[Asterisk-Users] Mediatrix 1204

2004-01-10 Thread Gonzalo Gasca Meza
Someone have the MIB for MEdiatrix 1204 version 2.4.10.68? thanks -- Almada Tres SA de CV Mitel Networks Eng. Gonzalo Gasca Meza Service Engineer 52+(55)53730570 Mexico City, Mexico ___ Asterisk-Users mailing list [EMAIL PROTECTED] http