You'll need to create a trunk between the two systems
Then configure your out bound routing to use that trunk
Eg if you use 1 as the prefix for the trunk
BOX A Ext200 will call box B EXT201 by dialing 1201
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Thanks
Terry noticed [EMAIL PROTECTED] 0.7 will try version 1
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Terry H.
Gilsenan
Sent: Monday, 23 May 2005 1:35 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users
Thanks for the response all
I'm Currently running version 1.0.7 of asterisk,
Key configuration lines as below, for those who have it working is there
anything that stands out as incorrect?
*
Zaptel.conf
fxsls=1-4
loadzone=au
defaultzone=au
Afternoon all,
After doing some test on my asterisk box I can successfully receive
calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
Dial out from a sip phone is also not an issue, all calls connect and
terminate normally.
If I call the Asterisk PBX say from PSTN in Zap1-1
