I am using it at home with FreePBX on a Clarkconnect 4.3 community server. Only
about 10 calls a day but it is doing IAX to SIP. Not had any real problems.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sebastian
Gutierrez
Sent: Friday, November 07,
: [asterisk-users] fax / t38 gateway
On 10/31/08, Jonn R Taylor [EMAIL PROTECTED] wrote:
Here is the QOS script that I use on my bridge.
http://www.taylortelephone.com/asterisk/astshape
You should upgrade to the newer astshape script. It classifies
traffic using iptables, which is much more
: Thursday, October 30, 2008 6:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] fax / t38 gateway
Jonn R Taylor wrote:
I have been able to repeat the results at other locations. The location that
has 26 pages is a linksys PAP2T our accounting person
This is caused by your DSL/cable modem buffering the data internally. To
resolve this you need to feed the modem at a data rate that prevents it from
buffering. I solved this by using a shaping bridge server that does nothing but
control the data in and out of the internet connection. I have
which can send sudden
burst of data to you, grooming doesn't do a whole lot of good.
Jonn R Taylor wrote:
This is caused by your DSL/cable modem buffering the data internally. To
resolve this you need to feed the modem at a data rate that prevents it from
buffering. I solved this by using
What version of *? Are you going all VOIP for your voice or are you using a
T1/E1? *?
1.4 has t38 pass-through and 1.6 has pass-through and termination, but 1.6 was
just release and I would not suggest using it in a production environment
unless you can tolerate problem or even outages.
If
What about zfone project???
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tam
Sent: Tuesday, October 21, 2008 12:49 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] How Secure Is Asterisk
There are no
Install a T1 between the Panasonic and Asterisk and program the T1 in the
Panasonic as a other custom PBX. VOIP card would be the best.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rodolfo Alcazar
Portillo
Sent: Tuesday, October 21, 2008 10:55
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joseph
Sent: Wednesday, September 24, 2008 6:03 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] NVFaxDetect (1.0.6), NVBackgroundDetect was: Asterisk
1.4 or 1.6
On
http://www.taylortelephone.com/asterisk/
There are install scripts for Centos 5 Asterisk 1.4. They should work just fine
on FC9. If you have a problem just email me.
Jonn
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pascal Bruno
Sent: Friday, September 12, 2008
Asterisk 1.6rc4 will only use dahdi. I just went though this on my test system.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Totaro
Sent: Friday, September 12, 2008 10:12 AM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List -
Should have been 1.6.0rc6.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonn R Taylor
Sent: Friday, September 12, 2008 4:04 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] asterisk 16 and zapata
Asterisk
Hi all,
I am unable to run make menuselect for asterisk-addons. Works fine for zaptel
and asterisk. Here is the output.
Jonn
[EMAIL PROTECTED] asterisk-addons]# make menuselect
CC=gcc CXX=g++ LD= AR= RANLIB= CFLAGS= make -C menuselect
CONFIGURE_SILENT=--silent makeopts
\make[1]:
Asterisk 1.6.0rc6 and Asterisk-addons 1.6.0rc1
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonn R Taylor
Sent: Thursday, September 11, 2008 3:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Unable to run make menuselect
This depends greatly on where you are calling. Most telco's will lookup the
name based on the number and will not use the name sent though the ss7 network.
One way to test this is to call your self on you PRI.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
I was able to compile from asterisk-addons-beta4 but not from trunk. I am
running CentOS 4.6.
Jonn
CC=gcc CXX=g++ LD= AR= RANLIB= CFLAGS= make -C menuselect
CONFIGURE_SILENT=--silent
make[1]: Entering directory `/usr/src/asterisk-addons-trunk/menuselect'
gcc -g -c -D_GNU_SOURCE -Wall -c -o
] Unable to compile asterisk-addons from trunk
On Tuesday 12 August 2008 07:28:05 Jonn R Taylor wrote:
I was able to compile from asterisk-addons-beta4 but not from trunk. I am
running CentOS 4.6.
If you're compiling against 1.6.0, then you should be getting the 1.6.0 branch
of -addons, not trunk
PROTECTED] On Behalf Of Jonn R Taylor
Sent: Tuesday, August 12, 2008 12:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to compile asterisk-addons from trunk
Only on -addons, asterisk compiled fine from trunk.
Jonn
-Original Message
Rxfax is very unstable on 1.4. I would suggest that you use iaxmodem and
hylafax.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Koch
Sent: Monday, July 07, 2008 8:59 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] rxfax not
I use bandwidth.com, works very well. 5 trunks start at about $125 a month.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of D. Dante Lorenso
Sent: Friday, June 13, 2008 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject:
I use FreePBX for my dial plan. I have been using iaxmodem and hylafax for over
a year with DID routing to email and samba shares. This is our mail fax number
dial plan.
exten = +16516834019,1,Set(__FROM_DID=+16516834019)
exten = +16516834019,n,Gosub(app-blacklist-check,s,1)
exten =
I made some install scripts based on centos 4 or 5 like trixbox but without all
the junk. It does have some fax setup stuff in it that I use on our production
servers that's been working for over a year. I you need any help you can email
me directly.
Jonn
No, Steve removed it from his site. I have a copy of it @
http://www.taylortelephone.com/asterisk/
Jonn
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Giordano Grandis
Sent: Friday, March 21, 2008 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
I have one for centos 4 that I compiled and should work just fine on 5. It is
located here. http://www.taylortelephone.com/asterisk If you have problems
let me know and I will build one for you.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
as an Fax-Gateway for analog Fax
devices
Jonn R Taylor wrote:
I have one for centos 4 that I compiled and should work just fine on 5. It is
located here. http://www.taylortelephone.com/asterisk If you have problems
let me know and I will build one for you.
I don't see IAXmodem 1.0
http://www.taylortelephone.com/asterisk/
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Klaverstyn,
David C
Sent: Monday, January 07, 2008 11:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] app_rxfax.c and app_txxfax.c
Paulo,
I am using them also. All call traffic to and from them must be in e164 format.
So your calls have to look like this, +15615551212 or +011 for international.
They do not let you set the caller name, but will let you set calling number
and that also needs to be e164 format.
Jonn
allow=ulawalaw
canreinvite=no
context=from-internal
disallow=all
dtmfmode=auto
host=xxx.xxx.xxx.xxx (IP address)
insecure=very
nat=no
qualify=no
tos=none
type=peer
This should work for you. They only accept g711 and g729. There service only
works with static ip's, so there is no auth
REALY?? Humm I have been doing this for over a year and we receive over 400
faxes a month! 8 iaxmodems with DID's from a real SIP provider. And this
connection is used for ALL office traffic, mail, VPN, webmail, and DNS. NO echo
and no voice quality issues. Now we do have a 12mb down 768k
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 Fax
Jonn R Taylor wrote:
REALY?? Humm I have been doing this for over a year and we receive over
400 faxes a month! 8 iaxmodems with DID's from a real SIP provider. And this
connection is used for ALL office
List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 Fax
Jonn R Taylor wrote:
I have it setup to email me any failed fax connections. Most of the faxes
come from remote offices, distributors and customers.
Same here, but HylaFAX won't send you any logs of attempts
PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: Tuesday, January 01, 2008 3:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 Fax
Jonn R Taylor wrote:
If I had ANY failed faxes I would here about it. Iaxmodem creates
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 Fax
Jonn R Taylor wrote:
One of the things that I found is you need to add nojitterbuffer to the
iaxmodem config file
The reason that you need the nojitterbuffer in the iaxmodem config file
is because
) with a 95% success rate.
t.38 is the key to successful faxing over a VoIP network. Without it, you're
begging for trouble.
Doug Lytle wrote:
Jonn R Taylor wrote:
If I had ANY failed faxes I would here about it. Iaxmodem creates a log of its
own, so when I get a connection that fails hylafax sends
] Asterisk 1.4 Fax
Jonn R Taylor wrote:
I have always said that if some one said it can't be done, they did not try
hard enough.
FYI... I love this.
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety
I maintain some scripts that I wrote to do a full CentOS Asterisk Hylafax
iaxmodem install. All here on the list are welcome to use them.
They new scripts are located here http://www.taylortelephone.com/asterisk/
Jonn
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Same here. Hylafax and iaxmodem is a good, reliable solution. Ihave been
running this for a year with n o problems.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: Saturday, December 29, 2007 1:32 PM
To: Asterisk Users Mailing List
The old x100p cards where 5 volt pci cards. I had this same problem and it was
the type of pci slot that I had the card plugged into.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris Boczko
Sent: Tuesday, December 11, 2007 1:02 PM
To: Asterisk
I am using bandwidth.com for our sip provider and I can send faxes from a PAP2T
with no problems and it make it more complicated I can send faxes from a remote
office thought our main office and then out to or sip provider. Example.. PAP2T
--- asterisk --- IAX2 asterisk --- bandwidth.com ---
That card is a modem not an x100p clone. See
http://www.voip-info.org/tiki-index.php?page=X100P+clone
Jonn
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rizwan Hisham
Sent: Saturday, December 08, 2007 3:31 AM
To: Asterisk Users Mailing List - Non-Commercial
What LAN and you using? ELAN or HSP Are you trying to connect to a signaling
server? Please provide Nortel config.
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, November 28, 2007 2:06 PM
To:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20RPM
Try this link. There is a lot of info and source rpms that you can rebuild.
Jonn
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Douglas Garstang
Sent: Tuesday, November 20, 2007 6:34 PM
To:
Hi, All
Here is the install script that I promised. Let me know if there are any
problems. I did not include nv_faxdetect in this yet, I am still working on
that. The hylafax-iaxmodem script I posted earlier should work on CentOS 5.
Correction to this post. Here is the script for CentOS 5.
http://jonnt.users.taylortelephone.com/asterisk/iax-hylafax-setup-centos5.sh
Jonn
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonn R Taylor
Sent: Thursday, November 15, 2007 10:49 AM
Hi all,
I had a few people ask me for the install scripts that I created for CentOS 4.
OK, here they are. The fist link install
asterisk-freepbx-spandsp-nv_faxdetect-tx/rxfax_app. The second on install
hylafax-iaxmodem.
for CentOS 4
Hi Jonn will these scripts work with CentOS 5?
--Zaheer
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jonn R Taylor
Sent: Tuesday, November 13, 2007 10:12 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Install Scripts for CentOS 4
Except that FreePBX has problems with php5. I played with this a little with
asterisk 1.4 and CentOS 5 and got it all working, I just have not had time to
get the scripts finised.
The other thing with CentOS vs Debian is that CentOS packages do not change
every month or so. Debain seems to a
Greg Cockburn wrote:
Hi all,
the company I work for has an aging Digital PBX attached to an E1.
This PBX has a few analogue lines, one of which we use a 'traditional'
fax machine on.
I want to upgrade our PBX and Asterisk is almost a perfect fit.
The only problem I can't seem to
Hi all,
I have an internal echo problem on my LAN only. I replaced the LAN
switch with a new linksys 2024 with QOS and seemed to help but not fix
the problem. Any ideas? Here in my setup - Dell PE6400 Dual 700,
Asterisk 1.2.24/FreePBX, 2-NIC cards, one with a public ip and one with
an
From: Jonn R Taylor [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
Will the madness never end?
Reply-To: Asterisk Users Mailing List - Non-Commercial
Discussion
asterisk-users@lists.digium.com
mailto:asterisk-users@lists.digium.com
Giedrius Augys wrote:
Hi,
I have problems with asterisk and hylafax+ iaxmodem. I can successfully
send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I
have problems: No carrier. This is hylafax log, maybe you can suggest
me where to find ...
Oct 17 07:38:48.22:
marco britannio wrote:
Hi all,
I'm trying to setup an asterisk based fax receiving machine.
i'm using asterisk 1.2.18 and app_rxfax with spandsp 0.0.4pre9
I have no problems with a modem-fax, but with the fax machines i have
tried almost every fax fails, both in sending and receive.
the
Jonn R Taylor wrote:
marco britannio wrote:
Hi all,
I'm trying to setup an asterisk based fax receiving machine.
i'm using asterisk 1.2.18 and app_rxfax with spandsp 0.0.4pre9
I have no problems with a modem-fax, but with the fax machines i have
tried almost every fax fails, both in sending
am looking at CTPX's VP2000 product. I haven't tried
it yet.
Please let me know if you find a solution that works.
Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:asterisk-
[EMAIL PROTECTED] Behalf Of Jonn R
Taylor
Sent: Friday, September 01, 2006 12:15 PM
To: asterisk-users
wrote:
I am looking at CTPX's VP2000 product. I haven't
tried it yet.
Please let me know if you find a solution that works.
Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:asterisk-
[EMAIL PROTECTED] Behalf Of Jonn R
Taylor
Sent: Friday, September 01, 2006 12:15 PM
Is there a card that supports analog DID trunks, alosi known
as ILT trunks or Incoming Loop Trunk. They work by providing talk battery to
the CO, incoming calls happen by pulling loop sending a wink accepting the DID
dtmf digits for the station being called.
Jonn
56 matches
Mail list logo
