Eric Wieling aka ManxPower wrote:
Glenn Powers wrote:
I keep getting this error every five minutes:
Apr 4 13:35:00 NOTICE[20551]: res_musiconhold.c:309 monmp3thread:
Request to schedule in the past?!?!
Apr 4 13:35:01 NOTICE[20551]: res_musiconhold.c:309 monmp3thread:
Request to schedule in the
Matt Darnell wrote:
On Mon, 28 Mar 2005 14:29:15 -0600, Jerry [EMAIL PROTECTED] wrote:
On Mar 27, 2005, at 12:10 AM, Matt Darnell wrote:
Has anyone been succesful pushing a VLAN setting to a Polycom phone
via DHCP?
Chicken or the egg! How can the Polycom reach the proper DHCP server
if it is
dhananjay sarnaik wrote:
Thanks for the information.
But still we are facing the same problem.
We tried upgrading the firmware to latest available on sipura website
and still the result is same.
Does any specific DTMF setting required? we have tried all the 3 options
in asterisk (inband,
Brian Dingman wrote:
Keith,
VP Connect is having issues right now with callerid being
transmitted... as much as they don't want to believe it. Sometimes it
works, sometimes it doesn't. Maybe this is part of the problem. Does
PM not work 100% of the time for you?
On Mon, 24 Jan 2005 21:29:37 -0500,
Robert Augustyn wrote:
Hi,
Is it the same as IP500?
Does it run the same software or do I need to flash
it?
Is so whare do I get it?
Thanks a lot.
robert
It is a Polycom IP500 running MGCP image if you're using ShoreTel. We
just finished a major ShoreTel installation at my work place.
Robert Augustyn wrote:
Joseph,
How did the insatllation go?
Any problems?
How do you power this units?
Thanks.
robert
--- Joseph Finley [EMAIL PROTECTED] wrote:
Robert Augustyn wrote:
Hi,
Is it the same as IP500?
Does it run the same software or do I need to
flash
it?
Is so whare do I get
The subject says it all. A couple of my sons have very annoying friends
that tend to call ALOT. I usually don't like to answer the phone but
these kids keep calling back with in 2 minutes of calling. I'm sure
someone else has this problem and maybe using * to do a callerID match
and block?
-info.org/tiki-index.php?page=Asterisk%20config%20extensions.conf
; note page search on CALLERIDNUM
http://www.voip-info.org/wiki-Asterisk+cmd+GotoIf
; found this too but havent used it
http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20SetGroup
-Original Message-
From: Joseph Finley
I asked this once before with no response, but it was on a weekend. Has
anyone used a ShoreTel IP530/IP560 phone w/ * ? They use MGCP as their
protocol to a ShoreTel server.
Joe
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Ben Merrills wrote:
Sounds good, sounds like a handy thing to have around! :)
Ben
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joseph
Sent: 20 August 2004 14:04
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Creating 79xx Configs
I made a little php
Anyone using ShoreTel brand phones w/ * ? Also, anyone interface * with
a ShoreTel system?
Thanks,
Joe
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Awesome idea.
--
Joseph Finley
Technical Services Manager
Professional Receivables Control, Inc. (PRC)
S. Arlington Road
Akron, Ohio 44312
V: 330.493.9004 X 135
F: 330.493.7123
[EMAIL
Charlie Hedlin wrote:
Who is the ISP for the conference center? I used to work for Wayport
and know lots of people there with clue.
Charlie
Olle E. Johansson wrote:
If possible, we will broadcast the Asterisk Developer's meeting on the
friday.
Internet connections in conference hotels is a
Jeremy McNamara wrote:
Mark Spencer wrote:
To everyone who spends time in #asterisk or #asterisk-bugs or
basically anything with #asterisk in its name, I want to implore you
to please treat new users with respect, and act as good
representatives of the Asterisk community. Recently I have had
Chris Shaw wrote:
Hmm Audio is one-way now, so it's not just DTMF, Audio Period is not being
received...
___
Can we keep this type of stuff off the list? It's annoying to get 100's
of emails a day with nothing other than a simple conversation. Please
Steve Totaro wrote:
They could spoof their caller ID to the Bush/Cheney campain and call people
at 3AM to ask for their support!!!
- Original Message -
From: John Fraizer [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, July 07, 2004 7:56 PM
Subject: Re: [Asterisk-Users]
Alberto Sato wrote:
What can I do because my X100P don´t answer sometimes.
I put these parameters in the zapata.conf, but sometimes my X100P don´t
answer.
usedistinctiveringdetection=yes
dring1=363,137,0
dring1context=incoming2
Any sugestion?
Mine does the same thing and yet to figure it
I have a X100P that works great for a couple days maybe even a week and then
outside callers say my phone just rings and rings. When I try to dial out
during this period, it waits dead air and then Allison says Goodbye and
hangs up. I have to stop *, modprobe -r wcfxo, modprobe wcfxo, and ztcfg
Here come the flames.watch out.
Terry, I would suggest picking up a book about MySQL at Borders. Not a
thick one, but a starter. There are many sites on the Net that can help
too..
I would suggest: http://dev.mysql.com/tech-resources/articles/
The first link should get you started. I
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lars Boegild
Thomsen
Sent: Tuesday, May 18, 2004 11:23 PM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] * and Cisco routers
Well - I would assume that most Asterisk instances run on Linux boxes, so
... There
is no competition possible. All and any implementations of that
algorithm are subject to the patent. This sort of patent is sort of
like Newton patenting gravity or a patent on 1+1=2. The technique is
more or less a law of nature.
Bruce
Joseph Finley wrote:
I think you patent haters
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of brian k. west
Sent: Friday, May 14, 2004 11:24 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: [Asterisk-Users] OMG THE SKY IS FALLING!! NOT!!!
http://www.eweek.com/article2/0,1759,1591131,00.asp
Well said.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andy Powell
Sent: Friday, May 14, 2004 12:03 PM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] OMG THE SKY IS FALLING!! NOT!!!
http://www.eweek.com/article2/0,1759,1591131,00.asp
bkw
Sure, create an extension that has on-hold music and dial it on the speaker
phone using the second line.
[mohtest]
exten = 22,1,Ringing
exten = 22,2,Answer
exten = 22,3,MusicOnHold,classic
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joseph
Sent:
I think you patent haters are looking at the negative aspect only.
Remember, that competition drives innovation. If everyone used the same
product there would be no incentive to develop anything new or along the
same lines, where's reward to innovate if there is no incentive, why do it?
I've actually engineered some WiFi at come medical clinics and it does
depend on the gear you purchase. Cisco addresses this in their marketing
and technical spec sheets. The two major hospitals in my area use wireless
for their phones and mobile laptops for the nurses as they go room to room
Are you in control of both sides? What routing protocols are you using?
Simply using Cisco CAR can help, but not a total solution. Are the 2 T1's
carried by an ISP? Or are these private T's?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Troy Settle
You can also take a look at the following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_ref
erence_chapter09186a0080087f26.html
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Troy Settle
Sent: Monday, April 05, 2004
I have a problem w/ a IAX termination provider. Recently when people would
call over IAX, they could hear everyting even dial an extension. When the
extension picked up, I could hear them but they could not hear me. My ZAP
device works fine, it's just coming in over the IAX. I updated to the
Is anyone having problems registering with NuFone? My system has not been
able to register over the last couple hours. I've sent a support email in
without any answe as of yet.
Regards,
Joe
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Disregard, it's back up now.
Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joseph Finley
Sent: Wednesday, February 25, 2004 10:52 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Sorry, OT (NuFone)
Is anyone having problems registering
Title: Message
If you
have it configured to use * and the voicemail is configured, it should just
light up.
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
MahlerSent: Friday, January 30, 2004 3:34 PMTo:
[EMAIL
Is there an example of this somewhere?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Sharp
Sent: Thursday, January 29, 2004 3:08 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Incoming Voice/Fax Discrimination?
I'm evaluating * to
I have an * box at my home office. I have my GS 101 at work that registers
fine with it. However, when I try to dial voicemail from the phone @ work,
it sometimes doubles the digits I enter. Example: I designated 8500 as
my voicemail, so when I dial it...and it prompts for mailbox/password
The basic wisdom about a kernel is to use as few pieces in it as
possible. If you can get away with stripping it down to bare minimum
then you have removed sections of low non-swappable memory from ever
loading. Optimize to your current CPU level. Maybe implement QoS and
firewalling so you
Can you imagine trying to sell this to a customer though? The customer
see's you walk in the door w/ an X-Box or PS2 and they say That's our phone
system ?!? Not that I would think someone would do it, just a thought that
entered my mind.
Joe
-Original Message-
From: [EMAIL
Don't set it to answer the zap channel.
Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, December 05, 2003 4:48 PM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] Fax
Thanks for that
One question how do I
I have not heard and I was just looking myself. I would say no at this
time, possible 1st QTR 2004
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Todd
Sent: Wednesday, December 03, 2003 11:26 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Any
I get echo on my X100P for about 15 seconds then it disappears. Believe me,
when I get a chance I'm going to tweak it since my wife nags me about it. I
converted my house over to *.
My setup:
Compaq Deskpro EN SFF P3 500
Dual NIC for real IP and internal IP
X100P Card for PSTN.
Cisco ATA186
American companies are too cheap? That's laughable. I could get into
economic's but this is not the place. Your typical Cisco firewall PIX
training class avgs. $2499 a week. I can only think he's training 10 people
@ $2,000 a week. If he's making $20k for a week of training, no wonder why
I'm not sure if I am wording this correctly, but I'll try.
I have a Cisco 2621 w/ a couple FXO and FXS ports. I have a couple cheap
analog phones plugged into the FXS ports. I am able to get * to ring those
phones when a call comes in, but I cannot get the phones to dial out. I
guess it's all
Phil,
Check here
http://www.fnords.org/~eric/asterisk/
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Phillip Jackson,
Director of IT
Sent: Friday, October 24, 2003 2:29 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] X-Lite Voip Client
Anyone
I am successful in getting * to talk to my Cisco 2621 that has both FXO
FXS ports, but I cannot get my Cisco to dial thru the *. What I mean by
that is, plugging in a regular phone into the FXS port on the Cisco and
dialing thru * to a PSTN line. Any example on that would be great.
Thanks
Joe
I was about to ring the same sentament. I've been working with * for a few
months now and wouldn't even think of selling a service esecially on phones
that are still being worked on. I do have a couple GS phones and they work
great, for me. But when you put it in place where the peoples
I use mine all the time. Things to check or set:
Under System SettingsNetwork
1- Set the IP of you * box in Outbound SIP Proxy
Under System SettingsSip Proxy
1- Enable yes
2- Username (the name or number in your SIP.CONF [brackets]
3- Leave Authorized User blank (and remark out in SIP.CONF
So where do or can you get older version?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WipeOut
Sent: Thursday, October 02, 2003 10:50 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] WINXP Messenger SIP Client (Good News, Bad
News)
Anthony
Simply run the /usr/src/asterisk/safe_asterisk
And then type /usr/sbin/asterisk -vvvgcr
^
r being remote console and then you can do everything as if you ran it
directly and exit as you wish or STOP NOW to kill it.
Regards,
Joe
-Original
Title: Message
I was
able to get it to register just fine, but I get no sound. It connects
fine, no sound.
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anthony
MinessaleSent: Thursday, October 02, 2003 4:31 PMTo:
[EMAIL
That's exactly what I encountered every timeI eventually gave up on
it...Brian (bkw) gave me the configs and all, but was unable to get it to
work
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bartosz Jozwiak
Sent: Friday, September 26, 2003
Title: Message
I too
would like to see it. I've tried many times with the help of a few and
never got it to work. It always results in a fast
busy.
Joe
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bartosz
JozwiakSent: Wednesday,
You can always use the safe_asterisk script...it's in the /usr/src
directory. That's what I use.
Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of WipeOut .
Sent: Wednesday, September 24, 2003 11:02 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users]
I was supposed to get my replacement last week. I haven't received it yet
so hopefully someone reads this and prod's the appropriate person :)
Joseph
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tilghman Lesher
Sent: Monday, September 15, 2003
Semi-works with Opera. Some of the javascripting doesn't work. But aren't
we all happy IE users these days? ;)
Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Peter Pauly
Sent: Friday, September 12, 2003 6:35 AM
To: [EMAIL PROTECTED]
Subject: Re:
Um, you have to take your Rep out to breakfast? Sounds like someone's got a
good scam going on :)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David C. Troy
Sent: Friday, September 12, 2003 11:26 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users]
Title: Message
My
Cisco 7960 (SIP) works with * very well. I would say better than the
GrandStreams at the moment from my testing, but the price difference is
understandable.
Joe
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
No, I have a 7960 have not seen anything like this. Set the NIC on your PC
to 100/half or 10/half and see if that changed anything.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson
Sent: Monday, September 08, 2003 1:05 PM
To: [EMAIL
Rich, you can do **# and go into the Network config and hit **# again, you
should notice the LockPad come unlocked and then you can make changes. If
you upgraded, the default password is cisco
Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rich
I used a symbolic link and it works just fine for me.
-Joe
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Josh Roberson
Sent: Wednesday, September 03, 2003 4:30 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] MusicOnHold and MP3Player not
58 matches
Mail list logo