read the default extensions.conf file. some
examples included
- Original Message -
From:
Muhammad Muzzamil
Luqman
To: asterisk-users@lists.digium.com
Sent: Tuesday, February 22, 2005 2:35
PM
Subject: [Asterisk-Users] does asterisk
support menus?
Whene
Hallo All
I been looking at all list and i know this been
discussed millions of times
for incomming calls
I need to send the dialled number to the pbx so that
the correct extension
can be rung on the pbx side
current setup:
pbx ext--> fxs asterisk --> asterisk fxo --->co
line(pbx).
What a
Hi
If you going to run digium hardware, please make sure
that machine does PCI
2.2.. otherwise you will NOT be able to get the card
to work.
the slowest machine we found was a pIII that supported
pci 2.2
chow
Liaan
- Original Message -
From: "Paul Hales" <[EMAIL PROTECTED]>
To: "'Asteris
well, it seems like the 2 are communicating
correctley.. just went through
all the logs
what is the error that you recieve?
- Original Message -
From: "Bartosz Wegrzyn - asterisk" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial
Discussion"
Sent: Monday, February 2
Hallo
Did you allow udp outgoing on 4569 as well.. i found
udp bit different than
tcp when comming to firewalls
liaan
- Original Message -
From: "Bartosz Wegrzyn - asterisk" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Asterisk Users Mailing
List - Non-Commercial
Discussion"
Sent: Mon
Sent: Wednesday, February 16, 2005 1:50 PM
Subject: RE: [Asterisk-Users] Extra sounds (Weather)
> Liaan vd Merwe wrote on Wednesday, 16 February 2005
2:53 AM:
>
>> This is the example script (extracted from that
link) you will need
>> to find a weather page for your region
" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
Sent: Wednesday, February 16, 2005 12:23 PM
Subject: RE: [Asterisk-Users] Extra sounds (Weather)
> Liaan vd Merwe wrote on Tuesday, 15 February 2005
1:37 PM:
>
>
http://edgett.bc.ca/simonsays/archives/000228.html
- Original Message -
From: "Trevor G. Hammonds" <[EMAIL PROTECTED]>
To: "'C F'" <[EMAIL PROTECTED]>; "'Asterisk Users
Mailing List -
Non-Commercial Discussion'"
Sent: Tuesday, February 15, 2005 11:16 PM
Subject: RE: [Asterisk-Users] Extr
Hi
while on a call.. did you check your CPU usage.. i
have a P3 and sometimes
when i move my mouse, xlite starts to stutter.. cpu
then running 100%
just my 2cents
chow
L
- Original Message -
From: "Richard J. Sears" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, February 15, 2005 6:56 PM
Subje
http://www.voip-info.org/wiki-Asterisk+Embedded+Systems
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Tuesday, February 15, 2005 1:44 PM
Subject: [Asterisk-Users] solid-state asterisk pbx?
> I've been thinking of making a (mostly) solid-state
asterisk pbx.
>
> Take either ce
http://lists.digium.com/pipermail/asterisk-users/2004-March/038463.html
follow the thread.. should give you some info
- Original Message -
From: "Matt Kemner" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial
Discussion"
Sent: Tuesday, February 15, 2005 2:15 PM
Subj
Hallo
I used it, but quality was not that good.. extreamly
soft.(any ideas why?)
if you post you speex configs, i will try and help
regards
liaan
- Original Message -
From: "Florian Overkamp" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
Sent: Tues
hi
thanks very much
I need to look into the dsp.c file.. the tone generate is
abou 2 seconds on. then 0.5 off.
busy changing the pabx connection so i can plug directley
into a co-line. this would enable the pabx and * to use loop start.. and i think
that will solve my problems
thanks and en
Hi all
How do one "record" the tone that a pbx gives for
hangup, so that one can use that in indications.conf?
thanks
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.
Sorry all
figured out one needs to include the context that
the extensions to be dialed into the current context
thanks
Liaan
__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _
Hi all
I'm being really stupid today.
i simply want asterisk to answer a incomming call,
then wait for digits dialed. and then dial that extenstions
but i keep on getting: WARNING[3314]: pbx.c:2017
ast_pbx_run: Invalid extension '5', but no rule 'i' in context
'zap-in'
my config:
exten => 0
Hi all
I installed a tdm400p into a old p2
machine.
I'm not able to see it under /proc/interupts or
using lspci..
we removed all other cards. changed slots, forced
irq to that slot.. etc etc.
what is the min specs needed to get one of these
cards running?
thanks
L
Do you Yahoo!?
Ya
ok.
your options are:
setup publishing rule on your IPtables to allow
access to you internal * from external *
or:
register to the external server using the internalserver-peer username:pass
then you can, in your extension.conf,
call dial(iax2/internal-peer)
let me know if you need some hel
How did you configure the trunk between the 2
servers?
using register => user:[EMAIL PROTECTED]
server
or using extension?
- Original Message -
From:
Mustafa N.
Deeb
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Monday, February 07, 2005 1
on both servers?
- Original Message -
From:
Mustafa N.
Deeb
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Monday, February 07, 2005 12:12
PM
Subject: RE: [Asterisk-Users] IAX2 Trunk
Problems with NAT
Weird
It is empty , eve
when you did the iax show registration, what dit
the refresh say?
did it say the time you specified?
- Original Message -
From:
Mustafa N.
Deeb
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Monday, February 07, 2005 11:58
AM
Subject: RE: [
IAX_DEFAULT_REG_EXPIRE
that is the value to be changed in
iax2.h
- Original Message -
From:
Mustafa N.
Deeb
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Monday, February 07, 2005 9:45
AM
Subject: [Asterisk-Users] IAX2 Trunk
Problems w
Hallo
i had same problem
you need to staticly set the register refresh
variable in the iax2.h file and recompile. (cannot remember exact variable..
will look if you cannot find it.
put this on the external server.
I had to drop mine down to 14 sec, the default
is 60.
the problem is that the n
Hi
I had same issue.. It was an IRQ class between ztdummy
and my sound card.
you might want to load your sound card before the
others.. or vice versa.
cheers
liaan
- Original Message -
From: "Gareth Blades"
<[EMAIL PROTECTED]>
To:
Sent: Friday, February 04, 2005 5:10 PM
Subject: [Asteri
yes, that is true, but luckely all my dns etc is
sitting on firewall
machine, so no natting except for iax. i've been
monitoring this for last
few hours, and the only connections remaining is the
iax.
thanks
liaan
- Original Message -
From: "Rich Adamson" <[EMAIL PROTECTED]>
To: "Aster
uot;Asterisk Users Mailing List - Non-Commercial
Discussion"
Sent: Friday, February 04, 2005 6:09 PM
Subject: Re: [Asterisk-Users] IAX2 register Refresh
> On February 4, 2005 10:52 am, Liaan vd Merwe wrote:
>> I been looking into the whole code strugture of
chan_iax and i see th
uot;Asterisk Users Mailing List - Non-Commercial
Discussion"
Sent: Friday, February 04, 2005 6:09 PM
Subject: Re: [Asterisk-Users] IAX2 register Refresh
> On February 4, 2005 10:52 am, Liaan vd Merwe wrote:
>> I been looking into the whole code strugture of
chan_iax and i see th
Hi all
I been looking into the whole code strugture of
chan_iax and i see there is a option to specify the refresh rate of
registrations: But there is no code to actually load this from the config
file
thus i changed the setting in chan_so.h, and
recompiled. But still my refresh rate is 60 s
gt;
>
>
> globals.conf
>
> RMT1=www.domain1.zzz ;remote1
> RMT2=www.domain2.zzz ;remote2
> RMT3=www.domain3.zzz ;remote3
> RMT4=www.domain4.zzz ;remote4
> RMT5=www.domain5.zzz ;remote5
>
> I never reboot even when the DynDns changes.
>
> Regards
>
>
Hi all
Do any of you know i can force asterisk to lookup ip
addresses for peers and
trunks everytime it tries to make a call.
One of the peers has a dynamic ip and is using DynDNS
to register host. Now
i need to reload asterisk everytime i want to call it
thanks
liaan
___
edit /etc/asterisk/logger.conf
uncomment one of the console lines
and reload
chow
L
- Original Message -
From: "Robert Augustyn" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
Sent: Wednesday, February 02, 2005 10:36 PM
Subject: [Asterisk-Users] [EMAI
I had same thing.. mmm
i read your other post as well.
could it be that asterisk is not configured for you
region? ie, hangup sounds like this.. busy like this. etc ( forgot where one
sets this)
- Original Message -
From:
Robert
Webb
To: Asterisk Users Mailing List -
Hi
Have you enabled detect busy?
- Original Message -
From:
Robert
Webb
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Wednesday, February 02, 2005 5:01
PM
Subject: [Asterisk-Users] * not hanging
up when call from POTS to IAX phone
I had this as well
it is waiting for callerid.
you can try and disable caller id if you dont need it
- Original Message -
From: "Nigel Burgess" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, February 02, 2005 1:43 PM
Subject: [Asterisk-Users] Asterisk waits 4 rings
before FXO answers
incomingc
hi
try and enable detect busy .. worked for me, think
zapata.conf
cheers
l
- Original Message -
From: "Carlos Chavez" <[EMAIL PROTECTED]>
To: "Asterisk"
Sent: Wednesday, February 02, 2005 5:23 AM
Subject: [Asterisk-Users] X100P not hanging up...
> I have an asterisk servicer (1.0.5)
firewall.
If you really want to change the port,
well, you could look at the first line in the [general] section of iax.conf where it says port=, or try reading the docs at the URL I posted below :)
Guills
From: Liaan vd Merwe
[mailto:[EMAIL PROTECTED] Sent: Tuesday
try reading the docs at the URL I posted below :)
Guills
From: Liaan vd Merwe
[mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:17
PMTo: Asterisk Users Mailing List - Non-Commercial
DiscussionSubject: Re: [Asterisk-Users] IAX registration keep
working.
Rene Kluwen
Chimit
- Original Message -
From:
Liaan vd Merwe
To: asterisk-users@lists.digium.com
Sent: Friday, January 28, 2005 4:48
PM
Subject: [Asterisk-Users] Fwd and
Tollfree
Hallo all
do any of you know if
+config+iax.conf
Guills
From: Liaan vd Merwe
[mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 4:09
AMTo: Asterisk-Users@lists.digium.comSubject:
[Asterisk-Users] IAX registration keep alives
hallo all
could anyone tell me how to get
hallo all
could anyone tell me how to get the * to send
keepalive packets over a registration "trunk"
or how to increase the amount
I'm having natting issues, (the machine is siting
behind 2 nat firewalls)
thanks
liaan
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'__
Hallo all
do any of you know if the toll free access to the
Netherlands is still working via FWD or Iaxtel?
thanks
liaan
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'___
Asterisk-Users mailing list
Asterisk-Users@lists.digium
41 matches
Mail list logo
