17. Automatic Gain Control (Brent Davidson)
Is there any possibility of DAHDI supporting Automatic gain control on
TDM ports?
Have a look at asterisk-1.6.1 and module func_speex.so, which provides
AGC function. This function can be applied to any channel.
Documentation:
asterisk -rx soft hangup $(asterisk -rx 'core show channels' | grep SIP/7000
Hi,
I used this way of processing output from asterisk 1.2 and found out
that it is not 100% safe because there can appear unprintable characters
in the output. This will cause the following grep command to show
Message: 18 Date: Mon, 19 Jan 2009 19:56:14 +0200 From: Tzafrir Cohen
tzafrir.co...@xorcom.com
Subject: Re: [asterisk-users] Description of Zaptel/DAHDI E1 alarms To:
asterisk-users@lists.digium.com Message-ID:
On Mon, 2009-01-19 at 11:10 +0100, Lukas Rypl wrote:
I am missing any
.
Possible alarm states (based on zaptel.h 1.2):
1. No alarms
2. Recovering from alarm
3. In loopback (local loopback or far end?)
4. Yellow Alarm (is it only Far end Loss of Frame?)
5. Red Alarm (Loss of Signal?)
6. Blue Alarm (AIS?)
7. Not Open
Thank you for any help.
Lukas Rypl
I have a legacy device, which has multiple analog POTS lines and two E1
trunks with CAS signaling in 16th timeslot. It is in fact MFCR2
signaling without register signaling. Only the following link states are
signaled:
TxRx
ABCD ABCD
Idle
