My telco doesn't provide Disconnect Supervision or Polarity Change. So I
figured I have to detect hangups with busydetect=yes in zapata.conf.
I tested it. When the telco sends a busy tone * detects it and hangsup.
So far so good. The problem is the telco doesn't always send a busy
after
Yes I tried the rx and tx values, but no luck there. Then I removed
everything from this line, adsl, fax, etc. and left only asterisk and
still not working. Then I tried the following to get the dialtone and
dial digits myself
exten = _9,1,Dial(${TRUNK}/)
And that didn't work either. I also
:34PM -0400, Mehmet Tolga Avcioglu wrote:
I can't seem to be able to make outgoing calls with X100P card. I can
receive calls fine and it picks up the line and sends the tones, but the
telco doesn't recognize them. While the tones are sent I continue to
hear the dial tone on the line when I pick
I can't seem to be able to make outgoing calls with X100P card. I can
receive calls fine and it picks up the line and sends the tones, but the
telco doesn't recognize them. While the tones are sent I continue to
hear the dial tone on the line when I pick up a parallel. I also cannot
dial from
