PROTECTED]
All other numbers will get mapped to [EMAIL PROTECTED]
All outgoing calls will be placed through the Local channel in context
enhanced-outgoing.
Hope this helps
Darren Wiebe
[EMAIL PROTECTED]
Musaluke AK wrote:
Darren,
An example how to call that callback.agi script? The script
Darren,
An example how to call that callback.agi script? The script iself does
not have usage info.
Thanks
Anthony
Darren Wiebe wrote:
Hello. You should not need any special hardware for callback. You will
(obviously) need card to connect your box to the pstn. Do you have
something
Hello
I have been buttling to get a Valiant VCL-30 E1 channel bank multiplexer
talking to asterik's E100P card.
The Spec for the VCL says this:
Coding: hdb3
Signalling: CAS
Timing: can be internal, external sync
Nominal Impedance: 120ohm balanced, 75ohm unbalanced
supports euroisdn
In the
Does the * actually send all the digits? Does it matter what the 10th or 11th
digit is? I had a similar problem with calls going to an extension hooked to
a GSM terminal on our PBX ( not *).
All didits were being sent by * but the PBX would ignore the last one, so you
had to send any digit
hello,
I have been searching the mailing list for info on R2 signalling support
in *
The best I came up with was a post by Steve as far back as 18 Jul 2003.
This post indicates that some work was being done on it. Has anyone got
any info if the current cvs does have support for R2 on E100P
Dear all,
I have an FX0 card installed in * and connected to a PBX. Calling works
ok ( both in bound /out bound) but after the call, I have to press the
'#' key to terminate the call, otherwise the line stays busy. Anybody
has a fix for that?
Thank you.
Anthony
etc...
- wasim
On Thu, 18 Sep 2003, Musaluke AK wrote:
Dear all,
I have an FX0 card installed in * and connected to a PBX. Calling works
ok ( both in bound /out bound) but after the call, I have to press the
'#' key to terminate the call, otherwise the line stays busy. Anybody
has a fix
