Hi,
I had some issues especially with voicemail with the latest stable version. I took the chance to run the beta version snom200-SIP 3.56m. So far so good, it solved the vmail issues (dialing vmail from the message button failed). And I have not noticed any strange behaviour sofar.
Max.
Op
Hi Thorben,
I have just installed version 0.65. When I click on an extension to dial it dials the number that is the extension of the monitor. The weird thing is that in the * console the dial command shows the actual extension intented to be dialed (but it is not).
Max.
Op za, 19-03-2005 te
Hi,
See comments in line
> configured at mem 0xf91c5e00 fifo 0xf7598000(0x37598000) IRQ 5 HZ 100
> Mar 6 21:29:13 linux-1 kernel: zaphfc: Card 0 configured for NT mode
> Mar 6 21:29:13 linux-1 kernel: zaphfc: 1 hfc-pci card(s) in this box.
Your card is configured in NT mode this something you
Hello,
With a Junghanns QuadBRI card I am experiencing trouble when dialing a
non-local number via ISDN. The site where I have trouble I can dial out
using and an active ISDN Fritz (=AVM) BRI card, but junghanns no go.
I have tested the asterisk and hardware in the same set up at a
geographical d
Hi,
With chan-capi driver you have the command CapiCD to deflect a call on the D-channel (as described on www.junghanns.net)
Does any one have an example (of the dial command) how to do the same thing with the junghanns drivers and the QuadBRI card? Would there be anything additional to insta
Hi,
I Looked through tons of pages sofar no luck. Hopefully some one could
tell me the directions or relevant commands for the following.
If I have an outbound call with a normal PSTN number from * to an other
* or IAX provider but that */provider is not reachable because of a
network congestion
