[asterisk-users] Process not draining UDP Recv-Q on port 5060

Hi, I have an issue related to SIP channels not able to drain the udp queue- I have only 150 uas registered to * ,v. 1.2.8 When Problem appears all uas loose their reachability. After a while the service Becomes available again-. UDP messages still comes to my ethernet board but The process is

Re: [asterisk-users] Use of ChanSpy

Maybe this helps ; spy on agent exten => *7792,1,Playback(agent-newlocation) exten => *7792,2,Read(EXT) exten => *7792,3,Chanspy(Agent/${EXT}|q) exten => *7792,4,Hangup ; spy on sip exten => *7797,1,Playback(agent-newlocation) exten => *7797,2,Read(EXT) exten => *7797,3,Chanspy(SIP/${EXT}|q) e

RE: [asterisk-users] Unicall + MFC/R2 line dropped immediately afterconnect

Hi, Clearback signal due to billing pulses normally drops calls after a fixed amount of time 2 minutes or so, Can you stablish an outbound call and after a while it drops? Or it never succeds? -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Peter Gubis Env

[asterisk-users] CallerID Presentation support for MFCR2

Community, We have released a new patch por mfcr2 & chan_unicall Regarding CID presentation via SetCallerPres() in Asterisk for R2 This files involves legal regulations impact and general support To dynamic adjustment in the ANI presentation to the user. They proved to be functional in a telco e

[asterisk-users] R2 Argentina

mfcr2 lib but this Simple patch works for me in mfcr2.c: /* * patch de Oscar Carriles * mfcr2->group_i_end_of_ANI_restricted = R2_SIGI_12;*/ mfcr2->group_i_end_of_ANI_restricted = R2_SIGI_15; mfcr2->group_i_end_of_ANI = R2_SIGI_12; Thanks to Steve UnderWood for his

RE: [Asterisk-Users] Unable to allocate socket: Too may open files

Try lsof command in order to see what open files are attached in one moment Something like that will help: lsof | wc -l (to get the count) lsof | grep ( to see only the files attached to one asterisk process) hope it helps Ing. Oscar Andrés Carriles Presidente InFoDaX Consultants Nicolás Jor

RE: [Asterisk-Users] PRI blocking on incoming calls

to the CSU and a crossover from the CSU to the RedFone and then a regular Ethernet cable from the RedFone to the Asterisk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oscar Carriles Sent: Tuesday, April 18, 2006 2:01 PM To: 'Asterisk Users Mailing List - Non-Commer

RE: [Asterisk-Users] PRI blocking on incoming calls

I believe it is important to determine if the issue arrives at TDMoE level (RedPhone uses it to avoid a direct T1 link with the box ) Or at PRI level. I am not clear what kink of link bridges your redPhone to Asterisk. Is it an ethernet link or a T1 crossover?     Ing. Oscar Andrés C

RE: [Asterisk-Users] R2 protocol error

I have one Sangoma A101 in Argentina running MFCR2 with no synching problem What about the timing source? I believe you have to set span=1,1,0,cas,hdb3 to be the slave of the source timing clock from your carrier hope it helps Ing. Oscar Andrés Carriles -Mensaje original- De: [EMAIL PR

[Asterisk-Users] AST eating CPU 100%->Resource temporarily unavailable

Ing. Oscar Andrés Carriles I got a CPU hog of 100% running asterisk 1.0.9 The problem is caused by a single process capturing all available CPU in one call. When this call hang up seldom others continue in normal service. I have all 30 SIP softPhones eyebean, 1E1 AFT101 Sangoma card signalling

RE: [Asterisk-Users] FW: I need to set NO CRC4 on zaptel.conf?

Zaptel.conf and wanpipe1.conf seem not be consistent. FE_FRAME = NCRC4 implies avoiding crc4 checks in zaptel. However, I had no much trouble with crc4 setup in an AFT101. First off all check if your PRI is provisioned, up & active. cli> pri show span 1 hope it helps Ing. Oscar Andrés Carril

RE: [Asterisk-Users] Telmex PRI line configuration problem

Andres, Thanks for the explanation! -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Andres Enviado el: miércoles, 15 de febrero de 2006 1:31 Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: Re: [Asterisk-Users] Telmex PRI line configu

[Asterisk-Users] Telmex PRI line configuration problem

Hi, Im so confused regarding Telmex specification of my ISDN PRI line. The following is the line specification from Telmex: Phisical interface:g703 coding: hdb3 signalling:isdn pri clock: recover crc4: yes framing:pcm30 or cas

[Asterisk-Users] SIP massive deregistration

producing this anomalies? Thanks in advance Oscar Carriles -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date: 10/02/2006 ___ --Bandwidth and Colocation p

[Asterisk-Users] SIP massive deregistration

ucing this anomalies? Thanks in advance Oscar Carriles -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date: 10/02/2006 ___ --Bandwidth and Colocation provided by Ea

[Asterisk-Users] Maximum retries exceeded on call/phantom calls?

I am confused due a side effect produced in my * installation. It consists of 1 Sangoma A101 E1/lSDN PRI card connected to Telmex service 16 analog phones thru SIP enabled SP5004 Micronet gateways & 4 SIP hard phones. Everything in a local network/no natting. We are processing nearly 2000 calls/day