My existing setup is based on ITS Pantel device
(http://its-tel.com/upload/Door_Release_5.6(1).pdf) that is connected to
Linksys PAP2 device that is connected to Asterisk (SIP, of course).
Works well, very flexible, quite cheap & straight-forward setup. The
only thing you need to put attention
The only solution that I found for this is to use Asterisk 1.4 with
devstate backport
(http://svncommunity.digium.com/svn/russell/asterisk-1.4/func_devstate-1.4/)
and use the hints and to determine if it's inuse (or any other status)
before the dialing - in order to generate a proper reply. I
Hello,
I am looking to purchase a new quad-band cellphone and I'm looking for
one with WiFi and enough CPU power for stable SIP calls. I was wondering
if anyone here can share his experience and recommend on a good
cellphone. Any chance there is such a phone with even good WiFi profiles
manag
Over my experience with 1.0 and 1.2 branch, if you register both phones
the same SIP account and you will call it then both phones will ring,
however, from reading here and there I heard mixed feedback about it so
I just dedicated an account for each phone and I dial both of them at
the same ti
Does anyone know if Xorcom's Astribank can work within a Xen VM ?
Guillermo Salas M. wrote:
On Thu, 2006-12-07 at 10:16 -0600, Nathan E. Pralle wrote:
Hi all.
Done some research, Googled a lot, but can't find out if there is a USB
FXO adapter that works well with Asterisk. If someone kno
This is correct, if no NAT is involved anywhere and reinvites are
allowed then Asterisk will stay out of the media path and be used only
as Signaling server. So as for your answer yes, it will be able to
handle more calls than expected because there is no CPU overhead of the
media path.
It is
Michel R Vaillancourt wrote:
Tomer Horn wrote:
Hello list,
I am curious here if anybody here got an experience connecting Avaya
to Asterisk using H323 / T1. I am completely lack of experience with
Avaya and I wanna know if anybody here has connected Avaya to
Asterisk using H323 and managed
Hello list,
I am curious here if anybody here got an experience connecting Avaya to
Asterisk using H323 / T1. I am completely lack of experience with Avaya
and I wanna know if anybody here has connected Avaya to Asterisk using
H323 and managed to stabilize it. Google provides mixed comments
r
I'm not claiming to be an expert on the matter but I'm running here in
my small office 2 softphones and 3 hardphones (I'll replace the
softphones soon as well) and all of them are being NAT. The asterisk is
located remotely and all the clients connect to it with the help of
public STUN servers.
Hello,
I was wondering if it's possible to set a specific sip/iax peer context
with a certain IP addresses, so Asterisk will bind itself and connect to
the peer only using a specific IP addresses. That way, Asterisk will use
different IP addresses for different contexts (and making it easier f
Hello!
Are there any known (bad) issues / experience running Asterisk inside
Xen VM? Has anyone experienced running Asterisk inside a Xen VM with PCI
access to PRI adapter?
Regards, Tomer.
___
--Bandwidth and Colocation provided by Easynews.com --
I believe that depends what you do with your Asterisk. If your hard
drives I/O is not intensive
then go for it. I got a SOHO Asterisk installed on Athlon XP 2000+ and
ATA 100 Software
RAID-1. The server is mostly idle but there are times it does some work
and it's also serving
as extremely low
12 matches
Mail list logo