k was down for a short while, voicemail messages will be lost.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
int "";
> print "PHONE Number: ";
> print "";
> print "PARTY Number: ";
> print "";
> print "FORGE Number: ";
> print "";
> print " \">";
>
ust one point:
This is a "global" (or rather: channel-specific, but still common to all
in thecontext of that channel) setting. Suppose I have ( and suppose
Asterisk even accepts this syntax) :
$(TESTTIME(...)}
GotoIfTime(test1,...)
GotoIfTime(test2,...)
Bot
le:1 Rsrvd(None)
> DAHDI/1-1s...@national_mobile:1 Rsrvd(None)
This means that in those two ports (port 1 and port 4) you have a phone
that is off-hook.
If this is not the case, the detection of off-hook is incorrect
somewhere along the way (wctdm24xxp / dahdi / chan_dahdi).
(at least in the US).
For the record: in most other parts of the world it is actually alaw.
But anyway, both ulaw and alaw have very similar charasteristics, so
basically a 's/ulaw/alaw/' or 's/ulaw/ulaw,alaw/' on on config snippets
in this thread would generally work if you
conf. Rather, it is
> intended
> ; to be #include-d by /etc/chan_dahdi.conf that will include the global
> settings
> ;
Either copy it as-is to the end of chan_dahdi.conf or add the following
line to the end of chan_dahdi.conf:
#include dahdi-channels.conf
--
Tzafr
is
mis-reporting.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Coloca
pointer how to debug this further would be very appreciated.
>
> Best regards,
> Christian
>
> [1] lspci output of QuadBRI
>
> 02:0c.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
> Controller [HFC-4S] (rev 01)
--
Tzafrir Cohen
icq#
);
> exit(1);
> }
>
>
>
> The problem has something to do with ioctl function.
It should be simpler to diagnose this issue with zttest .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-
in Asterisk but that isn't the right way to
> go.
>
> What else can I do (where else can I look) to solve this issue?
Please provide trace from 'pri debug' .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406
The context is set for each channel . So you could set it e.g.:
context = incoming
channel => 1-3
context = incoming-4
channel => 4
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http:/
On Thu, Dec 10, 2009 at 11:23:18AM +0100, Olivier wrote:
> 2009/12/9 Tzafrir Cohen
>
> > On Wed, Dec 09, 2009 at 05:59:36PM +0100, Olivier wrote:
> > > Tzafrir,
> > > Would you say latest trunk (revision 7672) includes a fix for those
> > OctoBRI
> >
on script
> that tests for an internet outage and then restarts * after the conncection
> is back up. This is not a daily kill
'iax2 reload' ?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzaf
t;
>
> I've met a situation where a call remained active tough obviously, no one
> was talking to anyone.
> This kept gracefully restart from working.
>
> So, would a 'restart now' behave differently ?
Why would one want a daily sabotage of the system in the fi
this is happening?
> >
> > Thanks
> >
>
> Maybe you need to escape your quotes (\"restart gracefully\") in your
> script?
Huh? As you can see, Asterisk got the string as-intended. No need for
funny quoting tricks.
--
Tzafrir Cohen
icq#168
is device.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Colocation Provided by http:
t;initilize"
with "initialize" (closes issue #15571) Reported by: alecdavis
2. in chan_sip.c:
/* just confirm that we recieved the packet. */
Have you applied any patches?
Another thing to test: where did the string come from at run-time?
grep vm-recieved /
n 2
> Kernel modules: hfcmulti, wcb4xxp
Hmm... you're right. This seems to be a typo in PCI.pm. Fixed, thanks.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co..
you restart dahdi?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Colocatio
On Tue, Dec 08, 2009 at 06:51:12PM +0100, Olivier wrote:
> 2009/12/8 Tzafrir Cohen
>
> > On Tue, Dec 08, 2009 at 03:47:52PM +0100, Olivier wrote:
> > > 2009/12/8 Tzafrir Cohen
> > >
> > > > On Tue, Dec 08, 2009 at 08:50:40AM +0100,
-- Executing [...@local:4] Set("ALSA/default", "TIMEOUT(response)=10")
> in new stack
> -- Response timeout set to 10
> -- Executing [...@local:5] BackGround("ALSA/default", "demo-congrats")
> in new stack
> -- Playing 'demo-c
;
> /etc/init.d/dahdi start
>
> dahdi_cfg -vvv
'/etc/init.d/dahdi start' also runs 'dahdi_cfg'.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
e dahdi, not zaptel. And zaptel will be pulled by wctdm
anyway.
Hint: dahdi_hardware .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzaf
On Tue, Dec 08, 2009 at 03:47:52PM +0100, Olivier wrote:
> 2009/12/8 Tzafrir Cohen
>
> > On Tue, Dec 08, 2009 at 08:50:40AM +0100, Olivier wrote:
> > > 2009/12/4 Olivier
> >
> > > Trying with a Junghanns PCI OctoBRI, I've got :
> > > # dahdi_har
not support PCIe cards, at
> the moment.
> Should wcb4xxp driver support Junghanns PCI OctoBRI ?
In trunk it does.
It has been commited there quite a while ago but I guess you should use
trunk. Or use rpm packages from Elastix.
--
Tzafrir Cohen
icq#16849755 ja
x, exim, qmail - any program that provides a local
sendmail interface.
I personally prefer postfix.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://
On Fri, Dec 04, 2009 at 04:06:29PM +0100, Olivier wrote:
> 2009/12/4 Tzafrir Cohen
>
> > On Fri, Dec 04, 2009 at 02:42:18PM +0100, Olivier wrote:
> > > Hi,
> > >
> > > I'm using revision 6822 of Dahdi Tools.
> > >
> > > # dahdi_har
: 2.2.0.2 Echo Canceller: OSLEC
>
> # cat /etc/dahdi/genconf_parameters
> ...
> pri_termtype
> SPAN/1 TE
> SPAN/2 TE
> SPAN/3 NT
> SPAN/4 NT
With BRI cards dahdi_genconf assumes that it uses whatever the ca
yet, the current one.
Specifically?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwi
Why are the dahdi tools not reflecting the values
> by wanrouter?
What does the driver report?
head -n1 /proc/dahdi/*
If there are no alarms there, the wanpipe driver probably did not report
them to DAHDI.
--
Tzafrir Cohen
icq#16849755
gt; > Presentation: Presentation permitted,
> user number not screened (0) '' ]
The number you dialed is actually not ''. Figuring it out from
the trace is left as an exercise to the reader. However you told the
telco that this was a "
On Wed, Nov 25, 2009 at 11:05:52AM +, Mike wrote:
> On Wed, Nov 25, 2009 at 12:26:10PM +0200, Tzafrir Cohen wrote:
> > On Tue, Nov 24, 2009 at 11:03:16PM +, Mike wrote:
> > > Folks,
> > >
> > > I've got one of those GPO 1950's rotary dial phon
know the specs for UK pulse dial? How long should
> the pulses be and what is the gap between them?
I wonder if anybody wants to follow up on
http://bugs.debian.org/546329 (formly http://bugs.debian.org/399772 )
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@
much memory on that system?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Colocation
of the
outgoing calls.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and C
it.
http://voip-info.org/
http://asteriskdocs.org/
http://www.asterisk.org/docs
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com ia
On Fri, Nov 20, 2009 at 02:36:47PM +0100, Olivier wrote:
> 2009/11/20 Tzafrir Cohen
>
> > dahdi_genconf can tell what you have only after modules have loaded and
> > are using the device.
> >
>
> Do you imply I should have inserted in my installation script,
On Fri, Nov 20, 2009 at 08:33:17AM +0100, Olivier wrote:
> 2009/11/19 Tzafrir Cohen
>
> > On Thu, Nov 19, 2009 at 03:46:50PM +0100, Olivier wrote:
> > > Hello,
> > >
> > > On a very new system, I've got :
> > >
> > > # cat
er=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=1.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> -- --
-
efault. Also note that this is ignored for cards
such as the Junghanns one where NT/TE is set in jumpers.
>
>
> # dahdi_genconf
> Empty configuration -- no spans
> Empty configuration -- no spans
>
>
> Did I miss something ?
Driver not loaded?
Wh
Use dahdi_genconf to generate /etc/dadhi/system.conf and
> /etc/asterisk/dadhi_channels.conf.
You forgot 'dahdi_genconf modules' :-)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafr
t;
> Documentation is non-existant except for doxygen comments in the code.
What is the required configuration in Asterisk?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.c
I miss most of the info. This
> makes 'help' be not much help.
No.
But you can either:
1. Use a terminal that has a long enough scroll-back buffer (or screen
inside one that doesn't)
2. Run from the external shell prompt:
asterisk -rx 'help &#
at loss as to why yo want to use that old version.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
he HTML part:
this is my /var/lib/pgsql/data/postgresql.conf
# CONNECTIONS AND AUTHENTICATION
In the plain text part I see both lines as all-caps.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.co
postgres' and connect as
that user. It should work as a PostgreSQL admin user.
>
> THIS IS MY
> /VAR/LIB/PGSQL/DATA/POSTGRESQL.CONF
>
> # CONNECTIONS AND
> AUTHENTICATION
Small hint: Text in ALL CAPS is generally considered as shouting. Please
try to avoid t
w to configure it as an apt source.
However I have no idea why you insist on using that old version.
Consider this an answer to your question on debian-user as well :-)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tz
tall via yum and says it is already installed.
zttool has been renamed to dahdi_tool in DAHDI.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom
I see that the rules seems to be correctly
> loaded:
>
> udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file
What exactly do you have in that file?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406
uld go from my ip-pabc to your
> ip-pabc directly.
Wow, can I get money from incoming calls? :-)
(Money trasfers over IP)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.x
On Fri, Nov 13, 2009 at 12:38:22PM +1300, Matt Riddell wrote:
> On 13/11/09 12:33 PM, Tzafrir Cohen wrote:
> > On Fri, Nov 13, 2009 at 12:19:54PM +1300, Matt Riddell wrote:
> >
> >> Maybe the best way would be to make it that the default context only
> >> provides
TELEPHONY=yes' in
/etc/{sysconfig,default}/asterisk to start running. This is no longer
the case. Such requirements are not the thing that will make the user
read the documentation, and they get in the way of automating the
installation.
--
Tzafrir Cohen
icq#16849755
at implements g729 and g723 through a specific
Digium card.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
teerpike kernel: Dazed and confused, but trying to continue
NMI - Non Maskable Interrupt. This is a rather generic error message.
Search a bit to see how to make some more sense of the messages
following it.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
On Thu, Nov 12, 2009 at 01:43:48PM +0100, Olivier wrote:
> 2009/11/11 Tzafrir Cohen
>
> > On Wed, Nov 11, 2009 at 08:24:53PM +0100, Olivier wrote:
> > > What about adding per-span section headers like Asterisk .conf files ?
> > > [span1]
> > > group
On Wed, Nov 11, 2009 at 08:24:53PM +0100, Olivier wrote:
> 2009/11/10 Tzafrir Cohen
>
> > On Tue, Nov 10, 2009 at 06:06:12PM +0100, Olivier wrote:
> > > Hello,
> > >
> > > 1. How can specify in /etc/dahdi/genconf_parameters file that a port from
>
lines. What is the difference between
> them ?
> Shall I care to have them both ?
The second ones are not really needed. Unless you want to assume less of
the configuration below.
TODO: implement a [section] syntax there to care even less about such
inclusion.
--
ing DAHDI call. The dialplan context is set from
'context' in chan_dahdi.conf (where exactly?) . Now you'll probably need
to use some dialplan such as:
Dial(SIP/your-local-sip-extension)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@x
was not installed. In this
case, ask yourself why wasn't it installed.
What is the output of:
echo $PATH
What Linux distributribution is it? If not Linux: What OS is it? What
version?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.co
On Sun, Nov 08, 2009 at 06:20:46AM +, aster...@opensourcesolution.in wrote:
>
>
> hi all,
>
> i had installed asterisk under /etc. now i want to know by
> command which version of asterisk i had installed. how to know the version
> plz tell me.
asterisk -V
--
default default
>In Service
>
> What am I missing?
Configuration for the channel in /etc/asterisk/chan_dahdi.conf
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...
bc for the libc stuff, though this
typically is less useful.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
?
How have you tried setting it so far?
Reading the following may give you some hints:
http://www.catb.org/~esr/faqs/smart-questions.html
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www
dd. Now is the time to look at /var/log/kern.log .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
_
be playable by most systems.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidt
do I need to unload/reload the kernel modules?
Kernel loading is purely userspace.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@loca
hdi? The
> card is an X400p using its FXS module.
What version of DAHDI?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom
are
> usb:002/006 xpp_usb- e4e4:1161 Astribank-modular USB-firmware
1161: the FPGA firmware is not loaded.
http://docs.tzafrir.org.il/dahdi-tools/README.Astribank.html#_lsusb_test
What version of Zaptel is it?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co.
On Mon, Nov 02, 2009 at 02:49:05AM -0500, ALEX BALASHOV wrote:
> In a manner of speaking.
Top-posting, on top of your other sins.
Please spare us this capital punishment.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952
works, so this may or may not work.
So you'll have to provide some more specific details if you want to be
more specific.
Proper puctuation and proper separation of paragraphs (rather than
randomly pressing Enter) will also help making your messages look more
readable.
--
display.jsp?vnu_content_id=1004015447
Actually http://en.wikipedia.org/wiki/Code_injection#Shell_injection
will probably be more useful.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http:
complete" is released by Alcatel.
>
> I'm using libpri 1.2.8 and Asterisk 1.2.31.1.
I'm not sure if handling of overlap hasn't changed since.
But can you provide a trace of how Asterisk sees things? e.g. 'pri
intense debug span 1'
--
once and then the line gets hung up. If I pick up the phone really fast, it
> works. Any suggestions?
Is the issue reproducable?
If so: Could you please increase debug level to 5 and provide a trace
from that?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@
do you put that URL in your sig?
It's not mim. It's his email provider (the 'windows 7' part) and this
list's provider (the rest).
He's clearly not advertising himself. So I don't see as issue here.
--
Tzafrir Cohen
icq#16849755
signalling
> [Oct 26 20:58:40] ERROR[23050]: chan_dahdi.c:11294 build_channels: Unable to
> register channel '1-8'
> pbx*CLI> module load chan_dahdi.so
>
> any ideas?
What is the output of lsdahdi ?
Have you edited /etc/dahdi/system.conf ? To apply change
t i will fix it. The analog phone is
> connected to fxs port 1.
What is the output of:
asterisk -rx 'dahdi show channels'
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xor
onsider also asking there.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth an
output of the following two CLI commands?
module show like sip
module load chan_sip.so
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
__
ime. They were operating under the strict
limitations of 64kB code size limit (and weren't getting anywhere near
that, unless you built it with all the card drivers).
TFTP should just die.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-795
7;hardhdlc' rather than 'dchan' in
/etc/dahdi/system.conf .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
e trunk. Rather, development is
done in a specific branch (1.4 for libpri, 2.0 for asterisk-gui and 1.4
for zaptel, which is maintinance mode anyway).
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.co
On Fri, Oct 23, 2009 at 01:57:51PM -0500, Martin wrote:
> On Fri, Oct 23, 2009 at 5:41 AM, Tzafrir Cohen
> wrote:
> >> Well, I've never used zaptel for Linsys/Sipura adapter as zaptel does not
> >> make any difference on their operations.
> >> and I&#
On Thu, Oct 22, 2009 at 06:14:29PM -0600, Joseph wrote:
> On 10/23/09 01:40, Tzafrir Cohen wrote:
> >So all you have to do is implement Asterisk (or whatever) on that
> >Linksys device, provide DAHDI drivers for its FXS and FXO, and you're
> >done. Should be easy.
re
done. Should be easy.
(Or not)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth
gt;
> I don't have any experience with them, but there are 2 C AGI libraries
> available -- cagi and quivr.
There's also Asterisk::AGI in CPAN.
http://search.cpan.org/perldoc?Asterisk::AGI
http://search.cpan.org/dist/asterisk-perl/
Tends to be packaged for distributions now
4
[second-ones]
dahdichan = 5-7
[third-ones](polarity)
dahdichan = 8-10
[fourth-ones]
dahdichan = 11-24
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com ia
umber of generic imap clients:
uw-mailutils (including 'mailutil')
mailutils (the GNU mailutils)
Not to mention modules for various programming languages.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailt
#x27;t waste your money:
http://www.grep.be/blog/en/computer/hardware/fuck_you_sony
So I guess that this device is now just a toy and no longer useful.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co
e of Asterisk,
to say the least.
So, the magic is:
aptitude install libc-client-dev
./configure --with-imap=system
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:g
different kernel version for some
reason.
What is the output of:
uname -a
find /lib/modules -name dahdi.ko
How have you installed dahdi?
What version of asterisk is it?
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:
1.6.1 .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Colocation Provi
k to find
codec priorities. Asterisk uses a short time period to avoid wasting
time. That said, it shouldn't produce an order that is incorrect.
If you want to get better granularity in the results, try:
core show translations recalc 1000
--
Tzafrir Cohen
icq#16849755
inbound route" is FreePBX speak. This is a FreePBX
question. Please ask an Asterisk question.
For instance, show a dialplan trace, show the respective dialplan, show
the respective channel configuration.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+
ently have to do something else. Any suggestions as to
> what that might be?
You manage your dialplan with FreePBX. This mailing list supports
Asterisk. I have no problem with questions about FreePBX systems. But
they should also be phrased as Asterisk questions. This is a FreePBX
question.
On Thu, Oct 08, 2009 at 09:23:44PM -0700, Ujjval Karihaloo wrote:
> Dudes. just use G723...
Which has basically the same problems, if not worse (license-wise).
Just stay out of patent-encumbered algorithms (ones with greedy patent
holders, that is).
--
Tzafrir Cohen
requires an explicit usage license of some Intel code.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.
s coming
> from the PSTN line. All other: SIP, IAX work fine. I can hear those
> ok but, when it comes to a call that comes in from PSTN I get no sound.
What do you mean by "voicemail from PSTN"?
Asterisk's voicemail or the provider's ?
The cards is FXS? FXO? T1? E1?
valid use of undefined type 'struct module'
> (And lots more errors of that ilk.)
Any chance you just need to install linux-headers-`uname -r` ?
Could you please give a more complete trace?
What kernel version? Any missing headers?
FWIW, DAHDI builds fine on Debian Lenny (with a S
irsts]
group = 0
dahdichan = 1-8
[seconds]
group = 1
dahdichan = 9-16
[thirds]
group = 2
dahdichan = 17-24
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com ia
k for your code.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
___
-- Bandwidth and Colocation P
701 - 800 of 4011 matches
Mail list logo
