I have the same problem with OpenVOX D210E card These one is not working:
dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.6.1 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169 wct4xxp 0000:03:00.0: Firmware Version: c01a0000 wct4xxp 0000:03:00.0: FALC Framer Version: Unknown (VSTR = 0x04) wct4xxp 0000:03:00.0: Found a Wildcard: Wildcard TE210P wct4xxp 0000:03:00.0: VPM450: Not Present dahdi_echocan_mg2: Registered echo canceler 'MG2' wct4xxp 0000:03:00.0: TE2XXP: Span 1 configured for CCS/HDB3/CRC4 wct4xxp 0000:03:00.0: Lost crc4-multiframe alignment wct4xxp 0000:03:00.0: SPAN 1: Primary Sync Source wct4xxp 0000:03:00.0: RCLK source set to span 1 wct4xxp 0000:03:00.0: Recovered timing mode, RCLK set to span 1 wct4xxp 0000:03:00.0: TE2XXP: Span 2 configured for CCS/HDB3/CRC4 wct4xxp 0000:03:00.0: Lost crc4-multiframe alignment wct4xxp 0000:03:00.0: SPAN 2: Secondary Sync Source wct4xxp 0000:03:00.0: RCLK source set to span 1 wct4xxp 0000:03:00.0: Recovered timing mode, RCLK set to span 1 and these one working fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.5.0.2 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169 wct4xxp 0000:03:00.0: Found TE2XXP at base address e9100000, remapped to ffffc20000066000 wct4xxp 0000:03:00.0: Firmware Version: c01a0000 wct4xxp 0000:03:00.0: Burst Mode: On wct4xxp 0000:03:00.0: FALC Framer Version: 2.1 or earlier wct4xxp 0000:03:00.0: Board ID: 00 wct4xxp 0000:03:00.0: Reg 0: 0x37ffc400 wct4xxp 0000:03:00.0: Reg 1: 0x37ffc000 wct4xxp 0000:03:00.0: Reg 2: 0xe9100008 wct4xxp 0000:03:00.0: Reg 3: 0x00000000 wct4xxp 0000:03:00.0: Reg 4: 0x00000000 wct4xxp 0000:03:00.0: Reg 5: 0xe9100014 wct4xxp 0000:03:00.0: Reg 6: 0xc01a0000 wct4xxp 0000:03:00.0: Reg 7: 0x00001f00 wct4xxp 0000:03:00.0: Reg 8: 0x00000000 wct4xxp 0000:03:00.0: Reg 9: 0x00000000 wct4xxp 0000:03:00.0: Reg 10: 0xe9100028 wct4xxp 0000:03:00.0: Found a Wildcard: Wildcard TE210P wct4xxp 0000:03:00.0: VPM450: Not Present wct4xxp 0000:03:00.0: TE2XXP: Launching card: 0 dahdi_echocan_mg2: Registered echo canceler 'MG2' wct4xxp 0000:03:00.0: TE2XXP: Span 1 configured for CCS/HDB3/CRC4 wct4xxp 0000:03:00.0: SPAN 1: Primary Sync Source wct4xxp 0000:03:00.0: TE2XXP: Span 2 configured for CCS/HDB3/CRC4 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0081 wct4xxp 0000:03:00.0: RCLK source set to span 1 wct4xxp 0000:03:00.0: Recovered timing mode, RCLK set to span 1 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0082 wct4xxp 0000:03:00.0: SPAN 2: Secondary Sync Source wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0082 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0082 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0081 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0081 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000001, CIS = 0082 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 wct4xxp 0000:03:00.0: 2G: Got interrupt, status = 00000002, CIS = 0080 wct4xxp 0000:03:00.0: Reg 5 is e9100014 Can you fix that? Thanks in advanced. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users