Hi all,I've 2 * servers with static IP, and i notice that if i set both sip peers with host=server_ip and qualify=yes it presents UNREACHABLE on asterisk CLI.When i changed the host parameter to host=dynamic and set the register string in the [general] of
sip.conf on both servers, the connection
Here is my setup, this is just a test lab til I figure out how to do this
Both machines are on a lan, no routers, firewalls etc between
BoxA
192.168.1.192
2XXX extensions
BoxA iax.conf
[boxb-peer]
username=boxa-user
type=peer
trunk=yes
secret=mypassword
host=192.168.1.139
[boxb-user]
exten = _2XXX,1,Dial(IAX2/boxa-user:[EMAIL PROTECTED]/${EXTEN:1},30,r)
change ${EXTEN:1} to ${EXTEN}
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
Your cutting the leading dialed number from each box
exten =
_2XXX,1,Dial(IAX2/boxa-user:[EMAIL PROTECTED]/${EXTEN:1},30,r)
exten = _2XXX,2,Congestion
should be
exten = _2XXX,1,Dial(IAX2/boxa-user:[EMAIL PROTECTED]/${EXTEN},30,r)
exten = _2XXX,2,Congestion
Bails
Tim P wrote:
Here is my
while that did seem to change the error message it still doesn't ring the other phone
here is the error message:
-- Executing Dial(SIP/2001-781d, IAX2/boxb-user:[EMAIL PROTECTED]/1001|30|r) in new stack
-- Called boxb-user:[EMAIL PROTECTED]/1001
-- Hungup 'IAX2/boxb-peer-1'
== Everyone is
IAX2/boxb-user:mypassword2 at 192.168.1.139/1001|30|r) in new stack
it's dialing extension 1001, not 2001
ah, i seetry this (dirty, but it should work)
exten = _2XXX,1,Dial(IAX2/boxa-user:[EMAIL PROTECTED]/2${EXTEN:1},30,r)
___
--Bandwidth and
Great that fixed it, i can now call to the 2xxx extensions from my 1xxx extensions
awsome, thanks so much!
On 7/26/06, whois wes [EMAIL PROTECTED] wrote:
IAX2/boxb-user:mypassword2 at 192.168.1.139/1001|30|r) in new stackit's dialing extension 1001, not 2001ah, i seetry this (dirty, but it
-Original Message-
From: Altus Snyman [mailto:[EMAIL PROTECTED]
Sent: Monday, May 16, 2005 9:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] 2 servers via PRI
Good day all
How do i set a connection between 2 asterisk servers via PRI
In Bri I
Good day all
How do i set a connection between 2 asterisk servers via PRI
In Bri I would set one to NT and TE
How shoud the zapata.conf and zaptel.conf look
And how should the cable be?
All I got on the web was to set one to pri_net...this cant be all?
And the cable
pin1 -- pin4 pin2 -- pin5
Good day all
I've tried my iax conf and I'm struggling.So I want to know If someone
else got this working and if they can pleas send my their configs
I have to asterisk server,in different tows,both offices connected wit a
direct line so both servers are on the same network running SIP.Each
town
10 matches
Mail list logo