HELP!
Ok, so I have the following SIP.CONF:
[general]
context=default
port=5060
bindaddr=10.1.1.200
externip = XX.XXX.XX.XX
localnet=10.0.0.0/255.0.0.0
disallow=all
allow=ulaw
allow=g729
allow=g726
allow=alaw
register =
[EMAIL PROTECTED]:X:[EMAIL PROTECTED]/1234
[sip.broadvoice.com]
HELP!
Ok, so I have the following SIP.CONF:
[general]
context=default
port=5060
bindaddr=10.1.1.200
externip = XX.XXX.XX.XX
localnet=10.0.0.0/255.0.0.0
disallow=all
allow=ulaw
allow=g729
allow=g726
allow=alaw
register =
[EMAIL PROTECTED]:X:[EMAIL PROTECTED]/1234
[sip.broadvoice.com]
Kevin's entry in sip.conf does not have caller id properly defined
NOTICE: If received in error, please destroy and notify sender. Sender does
not waive confidentiality or privilege, and use is prohibited.
I think you might have to add the line below to [sip.broadvoice.com]:
insecure=very
I know that it's required for other services, and probably with broadvoice
as well.
/Anders
Ok, so I have the following SIP.CONF:
[general]
context=default
port=5060
bindaddr=10.1.1.200
externip =
After about 4 or 5 minutes, however, I cannot get incoming
calls. It either just rings or goes busy, and never executes
the dialplan in extensions.conf.
Broadvoice has four servers that may send your * server calls. This was
my sip.conf setup until last week (when I cancelled Broadvoice):