I have two X100P clone cards working perfectly
in my asterisk box, these lines are off an analog extension from a PRI.
They each have DID # assigned to them and I can call the DID
and receive calls. When I make an
outgoing call using the Zap trunk the caller ID is of the PRI line. Is
The callerid on "outside" lines is set by your carrier. Talk to them.
Regards,
Bryce Chidester
Rhino Equipment Corp.
[EMAIL PROTECTED]SIP: [EMAIL PROTECTED]
+1 (480) 940-1826 x305IAX:
[EMAIL PROTECTED]/305
On Jun 26, 2005, at 14:25, Jeff Glassman wrote:
I have two X
As usual, this is most likely a easy question, but here it goes any way:
How can I change the caller id on a transferred call so the called party
knows the call has been transferred from a colleague and it's not coming
directly from our outside lines?
The story goes like this:
1) Client calls. Al
We just had to bite the bullet and recognize the number following the
prepended string as being internal or external. We prepend the string
"INT:" so if I call my coworker, he sees "INT:Mojo" as the caller id, or
"INT:112" if I have it set to do extensions instead of names. if an
example inco
Hrm, well it depends exactly how you're transferring calls as to how
you'd write it in extensions.conf. Is it being transferred to an
internal line or to an external line? If external, then of course you
need to be able to set the outgoing callerid (you'd basically be
spoofing it, but that should
Cosmin Prund wrote:
> As usual, this is most likely a easy question, but here it goes any way:
>
> How can I change the caller id on a transferred call so the called party
> knows the call has been transferred from a colleague and it's not coming
> directly from our outside lines?
>
> The story g
asily identified?
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Joseph Tanner
> Sent: Thursday, March 02, 2006 10:43 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Us
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Matt Riddell [NZ]
> Sent: Thursday, March 02, 2006 10:55 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Changing cal
Ooooh, that's an excellent idea -- that's how I did my extension matrix
but didn't even think:
X10 Receptionist
X12 Mojo
X13 Charles
...etc...
where:
X = 1 to ring extension directly
X = 2 to send to user's voicemail
X = 3 to send to user's auxiliary phone (wireless/cellphone/softph
Message-
> > From: [EMAIL PROTECTED] [mailto:asterisk-users-
> > [EMAIL PROTECTED] On Behalf Of Joseph Tanner
> > Sent: Thursday, March 02, 2006 10:43 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] Changing call
On 03/03/06 04:17 Cosmin Prund said the following:
How can I change the caller id on a transferred call so the called party
knows the call has been transferred from a colleague and it's not coming
directly from our outside lines?
ironic ! we're trying to do the reverse:
1. call comes in via
n
> Subject: Re: [Asterisk-Users] Changing caller id on transfer
>
> Use the following variable in the dialplan to figure out that it has
> been transfered (this only works on a blind transfer) and change CID
> as you wish:
> # ${BLINDTRANSFER}: The active SIP channel that dialed the n
Sent: Saturday, March 04, 2006 7:05 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Changing caller id on transfer
>
>
>
> On 03/03/06 04:17 Cosmin Prund said the following:
> > How can I change the caller id on a transf
On 03/04/06 23:17 Cosmin Prund said the following:
My dial plan is as simple as it gets:
exten => 101,1,Dial(sip/sip101,180,Ttr)
But I'm doing blind transfers and you're doing attended transfers.
oh right, i had misadverntly thought you were doing attended xfers as well.
with blind xfers,
I have asterisk with two zap channels which are analog ports off a T1. They
each have a inward DID number If they are used for outgoing they show the T1
main number not the DID's number. Is there any way to send caller ID of the
inward DID number not the main number
Jeff
___
Hi list!
I am going to install an intercom module for our home. The intercom can
cater for 3 doors where people can ring the doorbell and the unit can
also remotely open the door (Siedle system).
It would be nice however to know that you are opening the right door or at
which door the people ar
On Jun 15, 2005, at 14:05, Jeff R Glassman wrote:
I have asterisk with two zap channels which are analog ports off a
T1. They
each have a inward DID number If they are used for outgoing they
show the T1
main number not the DID's number. Is there any way to send caller
ID of the
inward D
On Thu, 6 Jan 2005 13:22:43 +0100 (CET), Remco Barende
<[EMAIL PROTECTED]> wrote:
> Hi list!
>
> I am going to install an intercom module for our home. The intercom can
> cater for 3 doors where people can ring the doorbell and the unit can
> also remotely open the door (Siedle system).
>
> It wo
You could do:
exten => 301,1,SetCallerID("Front Door" <301>)
exten => 301,2,
this should work.
On Thu, 6 Jan 2005 13:22:43 +0100 (CET), Remco Barende
<[EMAIL PROTECTED]> wrote:
> Hi list!
>
> I am going to install an intercom module for our home. The intercom can
> cater
On Fri, 7 Jan 2005, Shaun Ewing wrote:
On Thu, 6 Jan 2005 13:22:43 +0100 (CET), Remco Barende
<[EMAIL PROTECTED]> wrote:
Hi list!
I am going to install an intercom module for our home. The intercom can
cater for 3 doors where people can ring the doorbell and the unit can
also remotely open the door
20 matches
Mail list logo
