Your configs look ok. All you need is BNC to RJ45 converter (I think the standard is G.703)
regards Martin On Tue, 2 Sep 2003, Langley, Sean wrote: > Dear Telcotype Braniacs, > > I have tried doing a google search to find out what this switch looks like, what the > physical interface is, but havn't been successful. I am quite new to the ISDN world > so I'm not sure what to expect when I see this switch. Does anyone have any > experience connecting to this switch? The following is basically all I have been > given for info: > > 1) Ericsson, AXT121, interface ETCST (ROF 137 2764/2 rev R3A), Euro-ISDN. Connected > to FMV test network. > 2) Subscriber normally synchronised (sync) from network. > 3) 2,048 Mbit, 32TS-PCM, CCS in TS16. > 4) HDB3, 75 ohm coax. > 5) CRC check enabled. > > Like I said, I am new to the ISDN world, my digium card has an RJ45 connection type, > what do I need to physically connect to the above mentioned switch? > > I presume my zaptel configuration will be: > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > loadzone=uk (not sure whether this is correct for sweden?) > defaultzone=uk > > and for zapata: > switchtype=euroisdn > signalling=pri_net > context=inc-e1 (or default...) > channel=1-15,17-31 > > Regards, > > Sean Langley, P.Eng > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users