'
Objet: RE: [Asterisk-Users]
Dell PowerEdge SC1425 w/ TE405P?
I just setup a SC420 with two TDMO4b cards
in it and it works just fine. No problems what so ever with it so far.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ben Hencke
Sent: Friday, April 22, 2005 6:42
PM
PROTECTED] De la part
de Ariel Batista
Envoyé : samedi 23 avril 2005 1:27
À : 'Ben Hencke'; 'Asterisk Users Mailing List - Non-Commercial Discussion'
Objet : RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
I just setup a SC420 with two TDMO4b cards in it and it works just
On Sun, 1 May 2005, David John Walsh wrote:
what sort of level of PC is required for 300 concurrent calls?
Doing what? Ulaw? That could probably be done on a single P4 2.8 Ghz. If
you want to transcode from Ulaw to something else, you need to scale the
hardware appropriately. Every case is
Along the same lines, is there some sort of capacity chart that maps
capacity based on translations/transcoding?
- Daniel
On May 1, 2005, at 2:45 PM, Greg Boehnlein wrote:
On Sun, 1 May 2005, David John Walsh wrote:
what sort of level of PC is required for 300 concurrent calls?
Doing what? Ulaw?
Hello,
I've been asked to build a couple of Gateway servers for a client
w/ TE405P hardware, and have been looking around at various 1U options.
I've been looking at SuperMicro and Tyan barbones boxes as possible
platforms, but then was directed to Dell's SC1425 by a friend. Short
Discussion
Subject: RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
On Fri, 22 Apr 2005, William Boehlke wrote:
SC1425 is great value but note it does not have high availablility
configurations.
In our opinion, telephony requires dual NICs, dual power supplies and
RAID 1 to have any
On Fri, 22 Apr 2005, William Boehlke wrote:
SC1425 is great value but note it does not have high availablility
configurations.
In our opinion, telephony requires dual NICs, dual power supplies and RAID 1
to have any hope of achieving five nines.
William Boehlke
What box would you
-Users] Dell PowerEdge SC1425 w/ TE405P?
Hello,
I've been asked to build a couple of Gateway servers
for a client w/ TE405P hardware, and have been looking around
at various 1U options.
I've been looking at SuperMicro and Tyan barbones boxes as
possible platforms, but then was directed
I have head that the SC prefixed Dells are not good to use with Digium
hardware. Considering how picky my TE405P cards were in other low end
Dell servers, I would suggest using an 1850 instead.
OTOH, if it does work, please let me know :-)
If you go to small biz, you can get the SC1425 trimmed
PROTECTED] On Behalf Of Brian Leyton
Sent: Friday, April 22, 2005 11:39 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Dell PowerEdge SC1425 w/ TE405P?
I'm interested in the answer to this question as well, except that my
project scope (and budget) are quite
Discussion
Subject: Re: [Asterisk-Users] Dell
PowerEdge SC1425 w/ TE405P?
I have head that the SC
prefixed Dells are not good to use with Digium hardware. Considering how picky
my TE405P cards were in other low end Dell servers, I would suggest using an
1850 instead.
OTOH, if it does work, please
11 matches
Mail list logo
