On 04/20/2012 11:30 PM, Eduardo Pimenta wrote:
Hello all,
Does anyone know if E&M over E1 signalling works on top of R2, ISDN
and where can I find a sample Dahdi configuration? Have done a lot of
google and cannot find a proper E1 configuration.
No it doesn't. E&M signalling is the same la
Hello all,
Does anyone know if E&M over E1 signalling works on top of R2, ISDN and
where can I find a sample Dahdi configuration? Have done a lot of google
and cannot find a proper E1 configuration.
Thanks,
Eduardo
--
_
-- Band
I'm trying to implement E&M type V over a T1 and have not had much luck.
Type V sends 1's when on-hook and 0's when off-hook (for a little background)
which is the reverse of type II, which is what the e&m keyword in zaptel.conf
gives.
The closest I have gotten is to set the channels to cas or
Title: a simple question .
I have
successfully installed and configured a WCTE11XP card to connect with a voice
switch (Cisco VCO/4K). Also, I have the SIP connection working as well, where a
call from the voice switch properly transfers to the SIP
phone.
The
voice switch is normally se
Title: a simple question .
I have
successfully installed and configured a WCTE11XP card to connect with a voice
switch (Cisco VCO/4K). Also, I have the SIP connection working as well, where a
call from the voice switch properly transfers to the SIP
phone.
The
voice switch is normally
h323 modules loaded.
any help on the h323 would be appreciated as well.
Regards
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of George Pajari
Sent: 22 March 2004 22:28
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] E&M Signalling
On Monday 22 Ma
On Monday 22 March 2004 15:35, David J Carter wrote:
I may need to connect to a system with E&M connectivity.
Am I right in assuming a T1 card and Channel Bank will give me this
connectivity?
Perhaps we ought to make sure we're talking about the same thing.
Mr. Carter: are you talking about
On Monday, March 22, 2004 3:44 PM, Tilghman Lesher
[SMTP:[EMAIL PROTECTED] wrote:
> On Monday 22 March 2004 15:35, David J Carter wrote:
> > I may need to connect to a system with E&M connectivity.
> > Am I right in assuming a T1 card and Channel Bank will give me this
> > connectivity?
>
> You ty
On Monday 22 March 2004 15:35, David J Carter wrote:
> I may need to connect to a system with E&M connectivity.
> Am I right in assuming a T1 card and Channel Bank will give me this
> connectivity?
You typically do not need a channel bank when using E&M. However,
you will probably need a T1 cross
On Mon, 2004-03-22 at 15:35, David J Carter wrote:
> Hi all,
>
> I may need to connect to a system with E&M connectivity.
> Am I right in assuming a T1 card and Channel Bank will give me this
> connectivity?
A T1 card will. If the channel bank is populated with the right cards,
it may be able to
David J Carter wrote:
I may need to connect to a system with E&M connectivity.
Am I right in assuming a T1 card and Channel Bank will give me this
connectivity?
Depends on the channel bank -- make sure it supports E&M.
If you don't need to support a lot of E&M trunks you can take a look at
Mu
Hi all,
I may need to connect to a system with E&M connectivity.
Am I right in assuming a T1 card and Channel Bank will give me this
connectivity?
Regards
Dave
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/
12 matches
Mail list logo
