...@lists.digium.com] On Behalf Of Valer Nur
Sent: Wednesday, August 27, 2014 6:16 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Echo Cancellation on VoIP networks
If the clients are not doing the echo cancellation properly, you can always use
a centralized echo
If the clients are not doing the echo cancellation properly, you can always use
a centralized echo cancellation software for VoIP networks.
On Wednesday, August 27, 2014 5:25 PM, Dennis Guse
wrote:
On VoIP echo cancellation is basically: hope that the client is doing AND is
doing it wel
On VoIP echo cancellation is basically: hope that the client is doing AND
is doing it well.
In the best case each client uses a knowledge about his hardware
(microphone, speaker, distance etc.).
---
Dennis Guse
On Tue, Aug 26, 2014 at 1:30 PM, Emiliano Vazquez wrote:
> El 26/08/14 a las 05:3
El 26/08/14 a las 05:33, Grant Bagdasarian escibió:
I’m new to Echo Cancellation and I was wondering how it is
handled/works on pure VoIP networks using Asterisk?
there is no echo problems on pure VoIP networks.
echo is a common problem when you have changes from analog to digital.
The only ec
Hello,
I'm new to Echo Cancellation and I was wondering how it is handled/works on
pure VoIP networks using Asterisk?
I did some research on the internet about EC on VoIP networks, but I can't
really put a grasp on it.
We currently have some Echo Cancellation chips on our Digium cards, but are
-Commercial Discussion
Subject: Re: [asterisk-users] Echo Cancellation when calling from softphone to
mobile.
Is there any Software solution?
On Wed, Jun 25, 2014 at 11:38 PM, Mitul Limbani
mailto:mi...@enterux.in>> wrote:
Put line side echo cancelation chip on ur PRI card.
On 25-Jun-2014
Is there any Software solution?
On Wed, Jun 25, 2014 at 11:38 PM, Mitul Limbani wrote:
> Put line side echo cancelation chip on ur PRI card.
> On 25-Jun-2014 10:35 PM, "Anurag Rana" wrote:
>
>> Hi,
>>
>> I am using Twinkle to call mobile phone but there is too much noise on
>> the mobile user'
Put line side echo cancelation chip on ur PRI card.
On 25-Jun-2014 10:35 PM, "Anurag Rana" wrote:
> Hi,
>
> I am using Twinkle to call mobile phone but there is too much noise on the
> mobile user's end. Mobile user's voice is echoed back to user. While on
> twinkle end everything is fine.
>
> Us
Hi,
I am using Twinkle to call mobile phone but there is too much noise on the
mobile user's end. Mobile user's voice is echoed back to user. While on
twinkle end everything is fine.
Using Asterisk 11.
Please suggest some way to mitigate the problem.
Thanks.
--
Anurag Rana
http://newbie42.b
Thanks Eric, I breezed through the documentation and got the
impression that this was the case. Good luck on getting rid of that
echo Bilal!
N.
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Ast
st 20, 2013 3:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Echo Cancellation
Unlike our friend Ghanshyam, i'm sorry for the hijack however does OSLEC only
work with telephony cards or, will it also work on a purely Asterisk SIP
e
On Tue, Aug 20, 2013 at 3:01 PM, Ghanshyam wrote:
> Shaun Ruffell digium.com> writes:
>
> >
> > On Thu, Jul 25, 2013 at 02:51:02AM -0700, bilal ghayyad wrote:
> > > Hello;
> > >
> > > If our Digium Telephony Card does not support echo cancellation
> > > like (1TDM410PLF or 1AEX410PLF), what is t
Shaun Ruffell digium.com> writes:
>
> On Thu, Jul 25, 2013 at 02:51:02AM -0700, bilal ghayyad wrote:
> > Hello;
> >
> > If our Digium Telephony Card does not support echo cancellation
> > like (1TDM410PLF or 1AEX410PLF), what is the best and simple way
> > to overcome the echo?
> >
> > Regards
On Thu, Jul 25, 2013 at 02:51:02AM -0700, bilal ghayyad wrote:
> Hello;
>
> If our Digium Telephony Card does not support echo cancellation
> like (1TDM410PLF or 1AEX410PLF), what is the best and simple way
> to overcome the echo?
>
> Regards
> Bilal
Also, just FYI, those cards do support adding
On 7/25/2013 5:57 AM, Patrick Lists wrote:
On 07/25/2013 11:51 AM, bilal ghayyad wrote:
Hello;
If our Digium Telephony Card does not support echo cancellation like
(1TDM410PLF or 1AEX410PLF), what is the best and simple way to overcome
the echo?
Use the free OSLEC echo canceller software modu
Hello;
If our Digium Telephony Card does not support echo cancellation like
(1TDM410PLF or 1AEX410PLF), what is the best and simple way to overcome the
echo?
Regards
Bilal
--
_
-- Bandwidth and Colocation Provided by http://www
On 07/25/2013 11:51 AM, bilal ghayyad wrote:
Hello;
If our Digium Telephony Card does not support echo cancellation like
(1TDM410PLF or 1AEX410PLF), what is the best and simple way to overcome
the echo?
Use the free OSLEC echo canceller software module or Digium's commercial
HPEC echo cancell
25.07.2013 13:51, bilal ghayyad пишет:
Hello;
If our Digium Telephony Card does not support echo cancellation like
(1TDM410PLF or 1AEX410PLF), what is the best and simple way to
overcome the echo?
oslec, imho.
--
_
-- Ban
users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Valer Nur
Sent: Monday, January 07, 2013 11:15 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] echo from channel bank
It sounds to me like you should first discuss it with a
cancellation that can handle long echo tail. One option is PBXMate.
From: Justin Killen
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Tuesday, January 8, 2013 12:17 AM
Subject: [asterisk-users] echo from channel bank
I have several
I have several adtran 624 with 24 FXS ports hooked up to analog phones. The
adtran is connected to asterisk via a channelized T1 into a digium TE820. I
have hardware echo canceling enabled on all channels/spans, but there is still
echo on the lines for both calls out of the trunk, as well as
-users@lists.digium.com
Subject: [asterisk-users] echo canceler query
Hello
I have a question regarding Asterisk echo cancellation.
I´m using a fax connected to an FXS interface and an E1 ISDN line to PSTN.
The issue I´m having is with sending fax through the E1 and I´m suspecting
is due to echo
Hello
I have a question regarding Asterisk echo cancellation.
I´m using a fax connected to an FXS interface and an E1 ISDN line to PSTN.
The issue I´m having is with sending fax through the E1 and I´m suspecting
is due to echo troubles as I have some echo issues in my E1 line.
How can I know if th
Hello sir,
There is an echo problem in sip voip call. I think it is because of delay in
audio.
Let me try to explain you my system setup.
I have test asterisk on two different system.
System : 1>
OS :Ubuntu(10.04)Lucid
System Type :x64-based pc
Processor
On Tue, Aug 16, 2011 at 05:38:37PM -0700, bilal ghayyad wrote:
> The current dahdi version is:
>
> PBX-FF*CLI> dahdi show version
> DAHDI Version: 2.4.1.2 Echo Canceller:
>
> Well, the output of the dahdi_cfg as shown below, it declares there is
> invalid argument. But, really I tried to change t
The current dahdi version is:
PBX-FF*CLI> dahdi show version
DAHDI Version: 2.4.1.2 Echo Canceller:
Well, the output of the dahdi_cfg as shown below, it declares there is invalid
argument. But, really I tried to change the configuration in the systems.conf
from fxoks=1-16 to fxsks=1-16 but did
On Tue, Aug 16, 2011 at 05:34:58AM -0700, bilal ghayyad wrote:
> OK, I can buy echo canceller from Digium and how will be installed in
> the digium card? Or it is a hardware?
If you're using a TDM2400 you can buy a hardware echocan module or HPEC (which
is a proprietary software echocan) if you de
OK, I can buy echo canceller from Digium and how will be installed in the
digium card? Or it is a hardware?
Currently I am reading a message at the consol that Unable to enable the echo
canceller .. does this means that Digium card that I have is not supporting?
This is the output of the dahdi_
On Sat, 13 Aug 2011, bilal ghayyad wrote:
To overcome the echo problem...
Digium sells 'High Performance Echo Cancellation'
http://www.digium.com/en/products/software/hpec.php
Also, the 'Oslec Echo Canceller'
http://www.rowetel.com/blog/?page_id=454
is supposed to be pretty
Hi All;
To overcome the echo problem, what mainly I have to do in the configuration
other than the following line in the system.conf under dahdi directory?
echocanceller=mg2,1-16
1) How can I know if the digium card supporting echo cancellator?
2) If I am getting a message in the consol that un
I'm assuming you haven't googled for solution, please go through
http://www.voip-info.org/wiki/view/Asterisk+echo+cancellation and
extra links in that article.
If that article were not helpful, please provide more information of
you setup, such as what analog card are you using, are you using
soft
Hello all.
I have a asterisk implementation (asterisknow 1.7.1), with a card with 2 FXO
interfaces.
When I call (or receive a call) from the pstn, I ear echo. This happens if I
use a softphone or IP phone, and does not happens if the call is internal.
Can you help me with this issue?
Best reg
Well, I "downgraded" this box to Asterisk 1.4.38 and all is well again. Echo
cancellation works properly, no problems, no errors.
I have to assume this is a bug in Asterisk 1.8.x or Wanpipe 3.5.18.
--Tim
- Original Message -
> Greetings folks-
>
> I'm experiencing issues with a freshly
Trying again... I think this got lost in the mailing list interruptions during
the last day or two...
- Forwarded Message -
From: "Tim Nelson"
To: asterisk-users@lists.digium.com
Sent: Wednesday, December 15, 2010 5:07:20 PM
Subject: [asterisk-users] Echo Cancellation Problem
Greetings folks-
I'm experiencing issues with a freshly installed box. When a call comes in via
PRI (Sangoma AFT-A104), I see this in my logs:
[Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo
cancellation on channel 12 (Invalid argument)
[Dec 15 14:26:10] WARNING[23546] chan
I think you refer to the echo test that comes with the default
extensions.conf file. Within the regular installation of asterisk on the
extensions.conf file you will have an echo test extension. I don't think you
need asterisk now for that.
On Fri, Nov 26, 2010 at 1:24 PM, Steve Edwards wrote:
>
On Fri, 26 Nov 2010, Ali Khalfan wrote:
> If I want to setup Asterisk simply to respond to echo calls (SIP calls
> from a softphone only), do I need to install AsteriskNow as well, or can
> I simply configure dialplan to do that?
'echo calls' doesn't mean anything to me. What does it mean to yo
Hi, Complete Asterisk noob here,
I just have a few general questions I need to ask before I start
installing it:
If I want to setup Asterisk simply to respond to echo calls (SIP calls
from a softphone only), do I need to install AsteriskNow as well, or can
I simply configure dialplan to do that?
The suggestions did fix the problem. Thank you Shaun and Paul for the help.
Regards,
Jared
On Fri, Oct 15, 2010 at 4:48 PM, Jared Geiger wrote:
> I haven't heard if this fixed it yet. However I was seeing the echo
> cancelers loaded before so I never realized I'd have to do this. Its a
> FreePB
On 10/20/10 11:04 AM, Ron wrote:
> Thank you Shaun, will try that. will that help on the echo issues users
> are encountering during calls?
If all the echo problems are due to erroneous tones, then I believe it
should.
If your users are still reporting echo you might want to contact Digium
tech
Thank you Shaun, will try that. will that help on the echo issues users
are encountering during calls?
On 10/20/10 10:28 PM, Shaun Ruffell wrote:
> On 10/20/2010 03:20 AM, Ron wrote:
>> I have setup a asterisk with freepbx, a TE122 and i have an ISDN.
>> My problem now is that callers are experie
On 10/20/2010 03:20 AM, Ron wrote:
> I have setup a asterisk with freepbx, a TE122 and i have an ISDN.
> My problem now is that callers are experiencing echo. checked on dmesg i
> saw this:
>
> # dmesg -c
> dahdi: Disabled echo canceller NLP because of CED rx detected on channel 2
>
That's sayi
I have setup a asterisk with freepbx, a TE122 and i have an ISDN.
My problem now is that callers are experiencing echo. checked on dmesg i
saw this:
# dmesg -c
dahdi: Disabled echo canceller NLP because of CED rx detected on channel 2
i searched google but found no soolution and i have no idea w
I haven't heard if this fixed it yet. However I was seeing the echo
cancelers loaded before so I never realized I'd have to do this. Its a
FreePBX install also so I checked all the include files and didn't see a
reference to these values anywhere.
Thanks everyone for the input, I should know soon
On Fri, Oct 15, 2010 at 9:55 AM, Jared Geiger wrote:
> I've recently upgraded an Asterisk system from 1.2 to 1.6.2 (did a
> full reformat and recompile) and I started getting echo over the PRI.
>
I did an update on a server last year, had the same problem. I needed
to explicitly set echocancel=ye
On 10/15/2010 10:33 AM, Jared Geiger wrote:
> This might be my problem?***
> [r...@voice ~]# grep -E "^echo" /etc/asterisk/chan_dahdi.conf
> *
> *So I added this under [channels]:
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800*
>
>
Most likely (unless you were including anoth
[r...@voice ~]# cat /etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Sep 24 21:44:03 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahd
On 10/15/2010 08:55 AM, Jared Geiger wrote:
> I've recently upgraded an Asterisk system from 1.2 to 1.6.2 (did a
> full reformat and recompile) and I started getting echo over the PRI.
>
> I've tried the default settings for echo in the system.conf file as
> well as I've compiled OSLEC to try and
I've recently upgraded an Asterisk system from 1.2 to 1.6.2 (did a
full reformat and recompile) and I started getting echo over the PRI.
I've tried the default settings for echo in the system.conf file as
well as I've compiled OSLEC to try and see if thats any better.
I'm not sure what to try nex
On Wed, Sep 15, 2010 at 6:10 PM, Al lists wrote:
> I'm a long time user of Digium carts and stupid me i wanted to give Sangoma
> a try.
> We got Sangoma A400 with 6 FXO ports.
>
> Asterisk version: 1.4.35
> Zaptel version: 1.4.11
> Wanpipe version: 3.5.11
>
> we tried to use fxtune but looks like
On Sep 15, 2010, at 6:10 PM, Al lists wrote:
> we tried to use fxtune but looks like it wont work with Sangoma
> card, ( please correct me if i'm wrong)
> Echo is really bad and also we have background noise on all lines.
> We tried both mg2 and oslec echo canceler.
I've only used Sangoma wit
- "Al lists" wrote:
> I'm a long time user of Digium carts and stupid me i wanted to give Sangoma a
> try.
> We got Sangoma A400 with 6 FXO ports.
>
> Asterisk version: 1.4.35
> Zaptel version: 1.4.11
> Wanpipe version: 3.5.11
>
> we tried to use fxtune but looks like it wont work wi
I'm a long time user of Digium carts and stupid me i wanted to give Sangoma
a try.
We got Sangoma A400 with 6 FXO ports.
Asterisk version: 1.4.35
Zaptel version: 1.4.11
Wanpipe version: 3.5.11
we tried to use fxtune but looks like it wont work with Sangoma card, (
please correct me if i'm wrong)
Hello Gareth,
echo also appears when making calls with a SIP phone. These are outgoing
calls.
Another site now also gives feedback on echo, telling they sometimes
also have echo on outgoing calls and if they recall right then sometimes
also on incoming calls (coming from a queue).
This one
Yes if you have a link where there is a lot of jitter it may affect the
call quality. I would try turning it off to see if it cures the problem
and if it does then you can restore the setting and implement a workaround.
Jonas Kellens wrote:
> Will turning off the jitter buffer affect the quality
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jonas Kellens
Sent: Wednesday, June 30, 2010 9:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Echo problem in VoIP-calls
Will tu
Will turning off the jitter buffer affect the quality of the other calls ??
jbenable = no
I must say I'm not really into these jitter-settings in asterisk. I made
jbenable=yes as "it can do no harm"...
Jonas.
On 06/30/2010 04:24 PM, Gareth Blades wrote:
Try the SIP phone. If it is better
Try the SIP phone. If it is better then you might try looking to see if
there are any echo cancelation settings on the softphone or analogue
adapter you can change. Try turning echo cancelation off aswell since if
there are two running they can interfere with each other and make the
situation w
Gareth,
multiple users/SIP-accounts use this asterisk server from many
locations. Like I said: in another location with a similar setup, there
are no echo-complaints on received or made calls.
If you say that it has nothing to do with the Cisco-router, I don't
really know what to go looking
Jonas Kellens wrote:
> Internet Telephony Service Provider = SIP provider. The company that
> connects the Asterisk-server via a SIP trunk with the other networks
> like GSM, analogue carriers...
>
>
> Jonas.
>
>> By ITSP do you mean a SIP provider?
>>
Thats where I believe the problem lies
Hi!
> The network setup is :
> analogue+GXW / softphone --> Linksys WAG160N --> Asterisk server --> ITSP
> --> other networks
Do it step-by-step: Take the Asterisk server out of the equation, i.e.
call the destination directly with your softphone or the Grandstream ATA
and see if that removes t
On 30 Jun 2010, at 13:48, Gareth Blades wrote:
> By ITSP do you mean a SIP provider?
ITSP: Internet Telephony Service Provider
S
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join
Internet Telephony Service Provider = SIP provider. The company that
connects the Asterisk-server via a SIP trunk with the other networks
like GSM, analogue carriers...
Jonas.
By ITSP do you mean a SIP provider?
--
_
--
Jonas Kellens wrote:
> On 06/30/2010 12:20 PM, Gareth Blades wrote:
>> So you get echo when calling from the softphone to the analogue phone?
>>
> From softphone to analogue phone is echo.
>> What if they call a regular telephone number?
>>
> Calling to a cellphone number or a fixed number
On 06/30/2010 12:20 PM, Gareth Blades wrote:
> So you get echo when calling from the softphone to the analogue phone?
>
From softphone to analogue phone is echo.
> What if they call a regular telephone number?
>
Calling to a cellphone number or a fixed number on another Telco-network
: ec
Hello,
I did not say that the analogue phone calls the Zoiper softphone or vica
versa.
Calls are made to from the Zoiper to an external number like a cellphone.
Calls are also made from the analogue phone to external numbers like an
international number in Holland...
Jonas.
On 30 June
Thats the jitter buffer. It has no effect on echo.
So you get echo when calling from the softphone to the analogue phone?
What about when one of those calls somewhere else?
What if they call a regular telephone number?
How do you connect in order to send calls to normal phone numbers?
Jonas Kelle
Hello,
I stated in my first post that both ends hear an echo when one speaks to
the other...
The only place where echo cancellation is being applied is in the
Asterisk server. I have the following in sip.conf :
;-- JITTER BUFFER CONFIGURATION
--
On 30 June 2010 10:28, Jonas Kellens wrote:
> Hello,
>
> I also thought about echo because the Zoiper softphone is used with a
> headset. But that didn't explain why the echo also appeared on the analogue
> phone + gateway.
>
> It will present it self on the analogue phone when it is introduced
Routers wont cause echo. In order for them to do so they would have to
store the outbound voice traffic, delay it and then mix it into the
inbound voice.
Telephones inherently cause echo. For domestic calls the audio path is
normally so short that any echo arrives back so quick the human ear do
Hello,
I also thought about echo because the Zoiper softphone is used with a
headset. But that didn't explain why the echo also appeared on the
analogue phone + gateway.
I have the same Grandstream GXW 4008 gateway with 5 analoge phones
attached in another environment and there, there are no
Jonas Kellens wrote:
> Hello list,
>
> this is the setup :
>
> analogue phone --> Grandstream GXW4008 --> Linksys WAG160N -->
> Asterisk-server (public)
> and
> Zoiper softphone --> Linksys WAG160N --> Asterisk-server (public)
>
>
> When calling with an analogue phone + Grandstream GXW and als
Hello list,
this is the setup :
analogue phone --> Grandstream GXW4008 --> Linksys WAG160N -->
Asterisk-server (public)
and
Zoiper softphone --> Linksys WAG160N --> Asterisk-server (public)
When calling with an analogue phone + Grandstream GXW and also when
calling with the Zoiper softphone
On Wed, 2010-03-03 at 10:14 +0530, DHAVAL INDRODIYA wrote:
> Hi,
>
> Carlos
>
> I checked dmesg on my server and i found following message
>
> what is meaning for this ? i cant understand
>
> VPM400: Not Present
> VPM450: echo cancellation for 128 channels
> VPM450: hardware DTMF disabled.
>
- "DHAVAL INDRODIYA" escreveu:
> Hi,
>
> Carlos
>
> I checked dmesg on my server and i found following message
>
> what is meaning for this ? i cant understand
>
> VPM400: Not Present
> VPM450: echo cancellation for 128 channels
> VPM450: hardware DTMF disabled.
> VPM450: Present and oper
Hi,
Carlos
I checked dmesg on my server and i found following message
what is meaning for this ? i cant understand
VPM400: Not Present
VPM450: echo cancellation for 128 channels
VPM450: hardware DTMF disabled.
VPM450: Present and operational servicing 4 span(s)
regards
Dhaval
On Tue, Mar 2, 20
On Tue, 2010-03-02 at 16:49 +, Brian wrote:
> On Tue, 2010-03-02 at 16:27 +, Gordon Henderson wrote:
> > On Tue, 2 Mar 2010, Brian wrote:
> >
> > > It would be nice to resolve this - but it's probably beyond my
> > > understanding and ability.
> >
> > Did you un-comment the 2 lines in Kbu
On Tue, 2010-03-02 at 15:44 +0530, DHAVAL INDRODIYA wrote:
> Dear All,
>
> How can we know the On board supports echo cancellation
>
> I have Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
> 02) board
>
> all working fine but sometimes i got echo when user are calling a PRI.
>
On Tue, 2010-03-02 at 16:27 +, Gordon Henderson wrote:
> On Tue, 2 Mar 2010, Brian wrote:
>
> > It would be nice to resolve this - but it's probably beyond my
> > understanding and ability.
>
> Did you un-comment the 2 lines in Kbuild in the ...linux/drivers/dahdi
> directory?
>
> Gordon
>
On Tue, 2010-03-02 at 15:59 +, Brian wrote:
> On Tue, 2010-03-02 at 12:45 -0300, Vinícius Fontes wrote:
> > - "Brian" escreveu:
> >
> > > On Tue, 2010-03-02 at 09:22 -0300, Vinícius Fontes wrote:
> > > > - "DHAVAL INDRODIYA" escreveu:
> > > >
> > > > > Dear All,
> > > > >
> > > > > H
On Tue, 2 Mar 2010, Brian wrote:
> It would be nice to resolve this - but it's probably beyond my
> understanding and ability.
Did you un-comment the 2 lines in Kbuild in the ...linux/drivers/dahdi
directory?
Gordon
--
_
-- B
On Tue, 2010-03-02 at 12:45 -0300, Vinícius Fontes wrote:
> - "Brian" escreveu:
>
> > On Tue, 2010-03-02 at 09:22 -0300, Vinícius Fontes wrote:
> > > - "DHAVAL INDRODIYA" escreveu:
> > >
> > > > Dear All,
> > > >
> > > > How can we know the On board supports echo cancellation
> > > >
> >
- "Brian" escreveu:
> On Tue, 2010-03-02 at 09:22 -0300, Vinícius Fontes wrote:
> > - "DHAVAL INDRODIYA" escreveu:
> >
> > > Dear All,
> > >
> > > How can we know the On board supports echo cancellation
> > >
> > > I have Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V
> (rev
>
On Tue, 2010-03-02 at 09:22 -0300, Vinícius Fontes wrote:
> - "DHAVAL INDRODIYA" escreveu:
>
> > Dear All,
> >
> > How can we know the On board supports echo cancellation
> >
> > I have Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
> > 02) board
> >
> > all working fine bu
- "DHAVAL INDRODIYA" escreveu:
> Dear All,
>
> How can we know the On board supports echo cancellation
>
> I have Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
> 02) board
>
> all working fine but sometimes i got echo when user are calling a PRI.
>
> is there any way to k
Dear All,
How can we know the On board supports echo cancellation
I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
02)*board
all working fine but sometimes i got echo when user are calling a PRI.
is there any way to know on board echo cancellation .
regards
Dhaval
--
_
Problem solved. :)
I was adding to the pstn line a gain of 6 DB for both sides.
It has to be less than zero. After that the echo almost disappeared.
2010/1/21 Alexandre Rodrigues
> Hello all,
>
> I have a Linksys spa3102 with one FXS and one FXO port.
>
> The problem is that I have a lot of e
Hello all,
I have a Linksys spa3102 with one FXS and one FXO port.
The problem is that I have a lot of echo when using the fxo port, the sound
is of very low quality.
So, since I am passing from a FXO port to a SIP channel I ask:
is there any Sip echo canceler software for asteris
hin lee wrote:
> We are using Polycom 550 and 650 phones and OSLEC echo cancellation
> software with Asterisk. Occasionally, we get echo on our PRI phone
> calls. The echo is always from our voice echoing back to us. How can
> I fix this echo? I have tried installing the VPMADT032 module on
We are using Polycom 550 and 650 phones and OSLEC echo cancellation software
with Asterisk. Occasionally, we get echo on our PRI phone calls. The echo is
always from our voice echoing back to us. How can I fix this echo? I have
tried installing the VPMADT032 module on our TE121 card, but tha
> I think you need to remove the line echocanceller in system.conf
> You could also try to use fxotune, it'a really improving things.
> You also need to put echocancel=yes in chan_dahdi.conf
This is a PRI, so fxotune is not the thing to use in this case.
- Noah
_
uld I have it?
This is my system.conf:
bchan=1-23
dchan=24
echocanceller=mg2,1-23
Thank you!
Hin
From: hin lee
To: noahisaacmil...@gmail.com
Cc: Asterisk Users Mailing List - Non-Commercial Discussion >
Sent: Fri, December 11, 2009 8:56:13 AM
Subject: Re: [asterisk-users] Echo issue
>
: noahisaacmil...@gmail.com
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Fri, December 11, 2009 8:56:13 AM
Subject: Re: [asterisk-users] Echo issue
>> The echo between our extensions (using Polycom 550 handsets) disappears
>> once I removed the Digium echo module
>> The echo between our extensions (using Polycom 550 handsets) disappears
>> once I removed the Digium echo module.
> Are you routing internal calls from SIP -> DAHDI -> SIP? The digium
> echo module will not have any effect on pure SIP <-> SIP calls. Do
> you have acoustic echo cancellation a
> The echo between our extensions (using Polycom 550 handsets) disappears
> once I removed the Digium echo module.
Are you routing internal calls from SIP -> DAHDI -> SIP? The digium
echo module will not have any effect on pure SIP <-> SIP calls. Do
you have acoustic echo cancellation active on
On Tue, Dec 8, 2009 at 7:37 AM, Noah Miller wrote:
> Hi -
>
>> I am having echo issues on our Asterisk box using a PRI circuit. I was
>> using the software echo cancellation and that helped a bit but didn't solve
>> it completely. So I went and bought a Digium echo cancellation module for
>> the
ude chan_dahdi_additional.conf
From: Noah Miller
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Tue, December 8, 2009 7:37:28 AM
Subject: Re: [asterisk-users] Echo issue
Hi -
> I am having echo issues on our Asterisk box using a PRI circuit.
Hi -
> I am having echo issues on our Asterisk box using a PRI circuit. I was
> using the software echo cancellation and that helped a bit but didn't solve
> it completely. So I went and bought a Digium echo cancellation module for
> the TE121 card. That made it even worst, getting more echo on
I am having echo issues on our Asterisk box using a PRI circuit. I was using
the software echo cancellation and that helped a bit but didn't solve it
completely. So I went and bought a Digium echo cancellation module for the
TE121 card. That made it even worst, getting more echo on external c
hey , all
i have one issue on incoming DAHDI PRI
it works fine many times but sometimes it creates bad audio and also having
echo in line
also recording going to be disturbed by this
i cannot understand this properly
can any one have solutions and how to improve this also how to monitor lines
1 - 100 of 848 matches
Mail list logo