My local context included all the others context, however i know this
is not a good practice.
[Local]
include => ERROR
include => Inter
include => Voicemenu
include => Call_Forward
include => Outgoing
include => Incoming
include => Conference
include => parkedcalls
include => recordings
Rich
> A DID number was dedicated to receive fax, but i have the problem when
> getting fax call,
> which call will become a normal phone call and no fax was printed. When
> fax is detected,
> the fax extension is executed and dial the extension of the HT486 device
> (firmware 1.0.5.22).
> Somehow s
A DID number was dedicated to receive fax, but i have the problem when
getting fax call,
which call will become a normal phone call and no fax was printed. When
fax is detected,
the fax extension is executed and dial the extension of the HT486 device
(firmware 1.0.5.22).
Somehow sending fax out
At 15:30 26-6-2003 -0300, you wrote:
I've tested ATA186 with a cisco827 as the H323 (or SIP) gateway
and I could transmite the fax without problem.
I get erros when sending faxes only when I user asterisk. :~
any tips?
I imagine the Cisco stuff uses T30/T38 amongst eachothe
On 26 Jun 2003 12:53:40 -0400
"James H. Cloos Jr." <[EMAIL PROTECTED]> wrote:
> > "Jim" == Jim Flagg <[EMAIL PROTECTED]> writes:
>
> Jim> Have you tried limiting your fax machines to a lower baud rate
> Jim> like 9600. I know on Vonage this seems to help.
>
> Speaking of which, IIRC the doc
> "Jim" == Jim Flagg <[EMAIL PROTECTED]> writes:
Jim> Have you tried limiting your fax machines to a lower baud rate
Jim> like 9600. I know on Vonage this seems to help.
Speaking of which, IIRC the docs for the ata mention that fax at
greater than 9600 is b0rked up to a recent firmware relea
REMOVE
- Original Message -
From: "Florian Overkamp" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 26, 2003 4:01 AM
Subject: Re: [Asterisk-Users] Fax and SIP
> At 16:01 25-6-2003 -0300, you wrote:
> >Hi list,
> >
> >
Have you tried limiting your fax machines to a lower baud rate like 9600.
I know on Vonage this seems to help.
- Original Message -
From: "Eduardo Goncalves" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 26, 2003 10:10 AM
Subject: Re: [Aster
I've never tried it with SIP, but I have faxed between to asterisk boxes
on the same network via IAX and IAX2. The secret was to set the codec
to ulaw or alaw. (Certain codecs, such as GSM, compress the data too
much for the fax machines to be able to communicate effectively.)
Jared
On Thu, 200
On Thu, 26 Jun 2003 09:01:21 +0200
Florian Overkamp <[EMAIL PROTECTED]> wrote:
> Hi there,
>
> I have made this setup work without any special modifications. I expect it
> raises some strict requirements on the latency of your IP network, so that
> might be an issue.
>
> |cisco-ata186|sip-
At 16:01 25-6-2003 -0300, you wrote:
Hi list,
I have the following scenario, and want to know what I have to do
to transmit faxes trought this link:
|cisco-ata186|sip-|asterisk|---E&M alaw link-PSTN
The codec used is g711a.
When I try to transmit a fax I
Hi list,
I have the following scenario, and want to know what I have to do to transmit
faxes trought this link:
|cisco-ata186|sip-|asterisk|---E&M alaw link-PSTN
The codec used is g711a.
When I try to transmit a fax I receive a "TX FUNCTION WAS NOT COMLET
12 matches
Mail list logo
