Change the RTP Packet Size: 0.010
to
RTP Packet Size: 0.020
Asterisk only work with 2 frames.
I can't send any fax with other values.
On 1/5/06, Joash Herbrink <[EMAIL PROTECTED]> wrote:
You could use a cisco ata 186.There aren't very cheap, but I have made them work on several of mycu
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Remco
Barende
Sent: Thursday, January 05, 2006 4:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Fax with Asterisk and Sipura 2100
I tried to get it working for a
I tried to get it working for a very long time (over a year) with every
possible set of config parameters I could find both for * as well as for
the Sipura's. Echo cancelling etc. etc. all changed but still problems.
I tried to get it working on an * box with a BRI line.
Finally I have given u
This is what I set on my Sipura:
You have to be in as admin and then advanced settings.
On the SIP page change:
RTP Packet Size: 0.010
On the Line Page:
FAX CED Detect Enable: Yes
FAX CNG Detect Enable: Yes
FAX Passthru Codec: G711u
FAX Codec Symmetric: No
FAX Passthru Method: NSE
FAX Process
I know the subject of faxing has been covered in some detail, but I was
wondering if anyone has a hardware configuration similar to ours that
has faxes working successfully and would be willing to share any
settings/insight.
We are unable to fax reliably with a Sipura 2100 connected to Asteris