the Sipura and still
no dice, does anyone out there have any ideas? Thanks.
-Original Message-
From: Matt Schulte
Sent: Friday, October 29, 2004 12:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] G729 and Sipura.
Yes it shows up. turns out my SNOM
: [Asterisk-Users] G729 and Sipura.
Yes it shows up. turns out my SNOM maybe a piece of sh*t. It almost looks like
Asterisk is responding with g723, or am I backwards./ This is part of SIP debug. I
called Digium support, they blamed the SIP devices.. ideas ??
--snip
Capabilities: us
I am having the same problem, it doesn't work on my SNOM either. Below
is my sip.conf .. On both sipura and SNOM I get same results, I can hear
voice
but not send voice.
sip show channels:
Peer User/ANRCall ID Seq (Tx/Rx) Format
xx.xx.xx.xx 811 3c26723bacd
On Fri, 2004-10-29 at 12:17, Matt Schulte wrote:
I am having the same problem, it doesn't work on my SNOM either. Below
is my sip.conf .. On both sipura and SNOM I get same results, I can hear
voice
but not send voice.
When you do a show g729 on the CLI do you get that the license is
Server: Sipura/SPA2000-2.0.10(b)
Content-Length: 0
-Original Message-
From: Carlos Chavez [mailto:[EMAIL PROTECTED]
Sent: Friday, October 29, 2004 12:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] G729 and Sipura.
On Fri, 2004-10-29 at 12
Hello All,
I purchased yesterday two G729 licenses from Digium to
my asterisk box. I used the register utility and i follow
the installation procedures as describes the README.
I forced my sipuras to use G729a protocol and on my sip.conf
too.
I get a message that there's no compatible codecs!!!
I've use Sipuras with * using G729 - with no problems.
Double check that G729 is turned on in the sipura and your sip.conf is
correct - if anything post excerpts from your sip.conf.
On Oct 16, 2004, at 6:27 AM, Jefferson Carvalho wrote:
Hello All,
I purchased yesterday two G729 licenses from
Use only g729 and not g729a. I tied it and it works greate with Granstream
Phone.
- Original Message -
From: Jefferson Carvalho [EMAIL PROTECTED]
To: Digium/ Asterisk-Users [EMAIL PROTECTED]
Sent: Saturday, October 16, 2004 3:27 AM
Subject: [Asterisk-Users] G729 and Sipura.
Hello All
Be sure, not to write allow=g729a in your sip.conf !
Correct entry is allow=g729
Regards
Jefferson Carvalho schrieb:
Hello All,
I purchased yesterday two G729 licenses from Digium to
my asterisk box. I used the register utility and i follow
the installation procedures as describes the README.
I
